If you find there is any copyright abuse, contact us as soon as possible, thanks.
ドリュー・ランズナー氏の椅子づくり講座/ chair class by Drew Langsner
00/00/0000, 00:00 | Masashi's woodworking diary
アメリカ人の木工家、ドリュー・ランズナー氏による椅子づくり講座が9月27日から始まりました。8人の参加者たちが、クリの丸太を割るところから挑みました。
The greenwood chair making class by American woodworker Drew Langsner started from the 27th September. Eight participants rived chestnut logs to make post-and-rung chairs.

今回の講座には、いくつもの大きな意味があります。
参加者として、飛騨の学校で師範を務める木工のベテランから、工房を構えるプロの木工家、森林文化アカデミーの現役学生、生涯学習講座の常連さんなど、幅広い人たちが集まったこと。グリーンウッドワークによって、木のものづくりを楽しむ人たちの新しいネットワークが生まれつつあります。
そしてアメリカの第一人者を講師に迎え、レベルの高いものづくり講座を美濃で開催できたこと。レベルの高さは、木工のプロたちが参加者として遠方から集まったことでも分かります。ドリュー・ランズナー氏は30年以上の経験を持ち、何冊もの著書があるグリーンウッドワークの専門家です。こうした木の文化の情報発信を美濃から続けていければと思います。
There are a lot of important meanings to have this class here at the Gifu Academy.
First, the class is organized and run by the Japan Green Woodwork Association, which was established by the graduates, students and short courses participants of the Gifu Academy. It is a good example of feedback to the college by the students.
The second thing is that a new network of people is being established by green woodwork as a catalyst. A master craftsman at the other woodworking college, professional woodworker who runs her own workshop, a regular participant of Gifu Academy short courses, are among the participants.
The third thing is to have had the best-quality woodworking programme here in Mino, Gifu prefecture. Drew Langsner is a famous woodworker who has more than 30 years of experience and published several books about green woodwork and chair making. We are hoping ourselves to be a centre of various woodworking information in Japan.
さて講座の前半の3日間は、ひたすら丸太を割り、四角に削り、それらをさらに八角形へ。
銑=ドローナイフや、南京鉋=スポークシェーブと呼ばれる道具を使って、椅子のパーツを作る作業が続きました。
During first three days of the class, the participants rived logs to pieces, and shaved them to square, then octagonal spindles using drawknives and spokeshaves.


Off on a tangent...
00/00/0000, 00:00 | The Refined Edge
I had some spare time recently while waiting for finish to dry and thought I would experiment with some inlay techniques. I have always found a piece of inlay with a surrounding border to be fascinating to be able to make. I need to confess, I've done this before although quite a while ago and need the practice. What I had in mind is a fair sized yellowheart diamond with a black border, I used blackwood. I have the inlay set in a lighter wood, nothing special, just a small offcut. The process of creating and inserting the inlay is a very good test of patience and fine hand tool skills , for almost everything here is accomplished with hand tools. The border itself is bandsawn from a larger piece of blackwood and the yellowheart also bandsawn from a solid block. The yellowheart inlay is first drawn out and cut with careful attention to the shape of the diamond, each of the sides and facets needs to be a mirror image of the other side. I then mark the inlay onto the lighter background wood with an allowance or margin for the surrounding border. Once marked with a fine knife, I then remove or carve out the recess for both the diamond and border. Next step is to fit both the yellowheart inlay and blackwood border into the recess with glue , make sure it is well seated and wait for everything to set. Afterwards, I judiciously handplane the inlay and the result is in the photo at top. I find it great therapy to go off and do some other type of woodworking during or after some intensive furniture making, it clears the mind and the instant results can be very gratifying, the practice also keeps the skill retention up...
sweet rebates!
00/00/0000, 00:00 | Sauer & Steiner
First off - let me apologize for not posting anything for a few weeks. I have been pretty busy in the shop - working on some very cool planes and some “other work”. I will be posting about it in the next few weeks.
I have recently completed a set of 4 rebate planes - 1/2", 3/4", 1" and 1-1/4" widths. The sides and sole are 01 tool steel and the infill is Brazilian Rosewood. It has been a while since I have made a set of these - and I have to say it was a lot of fun.

They are a matching set in that all the Brazilian Rosewood came from the same piece - but I tried to maximize some of the figure by using it where it will be most visible. The 1-1/4" rebate is a good example with that wonderful swirl at the front.



Most of the wedges have either some burl or curl in them.

Wood Talk Online No.32
00/00/0000, 00:00 | Matt's Basement Workshop PodcastTopics: Marc's new finishing room, The Earlex Spray Station, self-cleaning blast gates, "lazy people food", taking photos of your work, accepting credit cards, and dyed through tenons.
Relevant links: Steve Kaeser Lights
If you want to leave us a voicemail: 623-242-2450
USA trip
00/00/0000, 00:00 | David's blogWe are filming a DVD on ...
More Radial Arm Saw Adjustments
10/11/2008, 04:41 | A Woodworking OdysseyIt has been years since the radial arm saw came into my shop, and I have not used it at all because it was not set up accurately. I've been working on fixing this over the last two weeks, and I'm getting quite familiar with the settings.
The thing that took me longest, was getting the table to be nearly perfect in its alignment with the saw arm. I had spend hours trying to get this right, and I was getting nowhere until I learned the trick from a book called Fine Tuning Your Radial Arm Saw, by Jon Eakes. The secret was to adjust four reference points on the table and use a crescent wrench as a lever for fine positioning. This simple trick was a huge revelation, and once I learned it, adjusting the table was done in under an hour. I'm sure I could do it in under 30 minutes now if I needed to do it again.
I'm now most of the way through testing and adjusting the saw. I hope to finish tomorrow and start ripping stock for the storm windows I need to build. I guess I just needed a big project (ripping and chopping the stock for 5 storms) with a deadline (winter) to motivate me to get this machine working. There was no way I was going to rip all that stock by hand.
Norm Abram: Woodworking’s Best Friend
00/00/0000, 00:00 | WoodworkingONLINE.com
Make all the fun you want to about all his “routahs,” but you have to admit that Norm Abram has done more to foster a worldwide interest in woodworking than anyone else. While I don’t always agree with his choice of construction techniques and joinery, he has made woodworking approachable and less intimidating for millions of people. I had the chance to meet him (actually, just a handshake) at a Delta/Porter-Cable gathering at the AWFS show in Las Vegas in July. He seems like a great guy and I’d like to have the chance to sit and have a cup of coffee with him sometime.
In Design News, there’s a great article about how Norm got started and how he managed to make it into his 20th season this year on New Yankee Workshop. Did you know that Norm attended college with the intent of getting an engineering degree? Here’s an intersesting quote from the article:
“I hated sitting in a class of 600 in a thermodynamics class, but I loved being in the lab working with metals. I hung in there for a couple of years and said this isn’t for me. You can learn a lot from school and books, but you really learn from experience,” he says. Going with a gut feeling, he switched to production management in business school, sensing he wanted to be a building contractor. He came close but never earned a degree because midstream in college he “felt it was time to go to work.”
And the rest is history, as they say.
Podcast #27: 10 Essential Hand Tools for Your Shop
00/00/0000, 00:00 | WoodworkingONLINE.comI have a half dozen different squares in my shop. My framing square isn’t accurate enough for fine woodworking. A good try square is plenty accurate, but its uses are limited. The combination square, on the other hand, is one of the most versatile layout and measuring tools in my shop. That’s why it tops the list of my “10 Essential Hand Tools for Your Shop.”
If you’re interested in purchasing any of the items I mention in this Woodsmith Woodworking Podcast, be sure to check out the Woodsmith Podcast Store. You’ll find links to many of the items listed there.
Teak Wood Ring
00/00/0000, 00:00 | Wood Rings by Simply Wood Rings
The Teak is incorruptible. It hold its own against all that life throws at it.
See more here Teak Wood Ring
Son's First Pen Turning
00/00/0000, 00:00 | Wood Destruction by a Woodscrub
My 17 year old son, the one I built the black desk for, completed his first project on the lathe.
Using my Harbor Freight Mini Lathe he turned a mechanical pencil using a Rockler kit. The wood is some scrap padauk I had, and the finish is shellac.
While he had some guidance from me, the work was all him.
He's excited and wants to turn many more!
Blackbeard & Vampira
00/00/0000, 00:00 | The Village Carpenter
If I had a kid, I would insist that blackbeard makeup be part of his everyday ensemble.
Kill the Fatted Calf
00/00/0000, 00:00 | Skiving OffThere have been many kind words and comments that have come in regarding the missing skew chisel. (There have also been many harsh emails come in telling me to stop being such a whiny ass wanker….). I have focused on the more encouraging correspondence.
Well, this morning I faced the fear of the arachnids that inhabit the dark corners of the shop and went digging around in the corners to find the missing chisel.
As this photo shows…I did locate the chisel.
See that….I use the cocobolo handles to differentiate the two skew chisels from the other socket chisels in the tool roll. (And it is a beautiful wood for a handle that won’t see striking blows.)
The missing chisel wasn’t in the dark corner. It had not fallen off of the bench and rolled under the lumber rack. Instead, it was in the first (and last) place I looked. She was over at my sharpening station. Somehow she had snuggled up to a plastic tube of Herb’s “Yellow Stone”, and just rested there for a few days. (By the way…given that there are millions of recipes for honing compounds, mustards, and barbeque sauces…has anyone tried Herb’s Yellow Stone on Bratwurst??? Sorry, I digress.)
Again I appreciate everyone’s concern. I agree with all of those who said that one missing skew chisel is too many. But relax everybody….it just got lost in the shuffle as I became distracted from my sharpening duties last week.
Now if I could just find my Indianapolis Racers Hockey Puck that went missing in 1977….a black hole is still the only possible reason for that rubber cylinder to have disappeared from the top of my dresser… I think the hockey puck is truly gone for good.
283 Whiteside's Brass Height Gauges
00/00/0000, 00:00 | Matt's Basement Workshop PodcastWhen it comes to finding a tool(s) that can speed up your set up of router bits or blades I've been very skeptical.
But I've been won over by the brass height gauges from Whiteside. These little pieces of brass allow me to accurately set up bits so quickly I'm still convinced I'm doing something wrong, but the fact is these accurate results are repeatable over and over...
If you're interested in learning more about these gauges click here Whiteside Brass Height GaugesIf you'd like to enter for free schwag or just have a comment, question or suggestion drop me a line at mattsbasementworkshop@gmail.com or head over to my website at www.mattsbasementworkshop.com or call our Skype Voicemail at 231 354-2338.
If you have the time, please take the new listener survey.
Listen to today's show by clicking on the player below
To download directly to your computer Right Click on direct download, choose "Save Target as"
At the Newsstand
04/15/2008, 05:01 | Musings From My Shop
I?m still in a mode with very little time for woodworking. That?s not a complaint since the project keeping me out of the shop is a great opportunity and incredible fun. But there is some news from the shop.
About a year ago I made a new arts & crafts kitchen table with a tile inlay top. I wrote about the process for Woodwork magazine. The article is in the June issue, available now.
Soon I?ll be able to post about the current project. I hope you?ll agree that it?s worth the wait.
Work Sharp Hones Tools Quickly and Easily
00/00/0000, 00:00 | WoodworkingONLINE.comBack in March, the folks from ProTool (the folks that make the Drill Doctor) came into our offices to show us their new Work Sharp system for sharpening woodworking tools. You’ll be hearing it advertised on the Paul Harvey show. They left their WS3000 for us to play with in our shop.
One day not too long ago, I went to use the Work Sharp to hone some chisels for our new public television show, The Woodsmith Shop (more on that later). Well, I couldn’t find all the parts to the Work Sharp, so I resorted to honing the chisels by hand using wet/dry sandpaper. A few weeks later, I asked Steve Johnson, our shop craftsman, about the Work Sharp’s missing parts. He said that they weren’t missing and walked me around the corner of his work area and showed me the box that contained the “missing” parts. Turns out he had the Work Sharp squirreled away to keep it from disappearing. He says he uses it all the time for touching up his chisels. For example, when he’s chopping mortises or cleaning up mortises, all he needs to do is walk over to the Work Sharp, and in just a few seconds he’s got a sharp edge. He thinks it’s a great addition to his shop for keeping an edge on his tools.
Work Sharp has come out with a homeowner/DIY version of their system called the WS2000. It uses the same motor as the WS3000 but doesn’t have the built-in speed reduction and doesn’t come with the finer grits of abrasive that you’d use for honing. It’s meant for grinding a quick edge or, as one homeowner did, ground a sharp edge on his garden shovel.
Is technology where it's at?
00/00/0000, 00:00 | UnpluggedShop.comIn the US, there is a current discussion about a presidential candidate who apparently doesn't know how to used email. The question raises an interesting point.
Without going into the politics of the whole thing, which is a subject much better suited for other blogs, let's just look at the question of whether or not it is vital to be technologically integrated in this day and age.
If a person is, let's say over 50, is it vital that they get a computer and get into the internet age? I say no. I am not even convinced that the young should be totally immersed in it. Knowing how it works and understanding it is one thing, but for some of us, we would be better served to "just say no". For many more of us, we would be well served to limit our exposure.
I am not even talking about the renowned sinful temptations and cyberdangers of the internet. I am just talking about wasting our precious time in the pursuit of "efficiency." read more »
In the Den of The Bear
00/00/0000, 00:00 | Skiving OffI have to admit that Megan knows how to take a joke, and just to show there were no hard feelings, she let me pose for a photo with the Leigh Jig that they are giving away to the person who submits the winning article.
Nice, Megan. I think you were saying that my being disqualified from the contest for submitting articles under Gail's name isn't so unpardonable a sin as to preclude my ever appearing in the magazine again. It's just that the photo below is the closest I will get to winning a prize.
Megan has been assessed a 15 yard Unsportsmanlike Conduct penalty for "Taunting." The penalty will be assessed on the kickoff.
PTA Sandwich Board
00/00/0000, 00:00 | Woodworking DungeonI decided that if I'm going to work on this, I'm going to do it up right!
I built a new frame using some baltic birch plywood that I've had lying around. The top and bottom supports have rabbets cut into them to support the new removable 1/4" ply pieces that will hold the sandwich board content. I did re-use the hinges and chains from the original board.

The new board, while stable, is lighter and much more manageable than the original.
New friends and their beautiful wood ring design
00/00/0000, 00:00 | Wooden Rings from Touch Wood RingsBreda wrote:
You know, of everything we have chosen so far for the wedding - restaurant, dresses, music etc, this feels the most special. You and David make a wonderful team.”
History Traditional Kudus House
09/09/2008, 06:07 | Antique Knockdown Carved Wood HouseKudus is a city in the Central Java, Indonesia, located among Jepara, Demak, Pati, and Purwodadi districts and in the route of Semarang the capital city of Central Java to Surabaya (please see location map). Based on story, Kudus name was from Al-Quds, which mean holy.
Click image to enlarge
The history of Kudus cannot be separate from the name of Sunan Kudus as the founder and one of the Wali sanga (nine Wali) spreader of Islam in Java at that moment. As his inheritance, Kudus has a famous artefact called Menara of Kudus which form like a temple, placed in one complex with mosque of Menara Kudus that build by Sunan Kudus around 1685 M.
Except famous as a Wali city, since in Kudus area there is wellknown also Sunan Muria, Kudus also known for a long time as a kretek city (city of clove cigarette) as there are many entrepreneurs in the cigarette field. Beside that, Kudus can also called as city of industry because of the long development of industry in the area such as industries in cigarettes, papers, printings, handycrafts, embroideries, foods, etc.
Kali Gelis (Gelis river) which lying in the midlle of the city separates Kudus into two areas, one is Kudus Kulon (west Kudus), the other is Kudus Wetan (east Kudus). Long time ago, according to history, citizen of Kudus Kulon area were entrepreneurs, traders, farmers and moslem theologians, while occupant of the Kudus Wetan area were government officers, intellectuals, teachers, nobles and noble relatives.
Within the growth and development of Kudus, physically Kudus Kulon area, where the majority of the citizens were entrepreneurs and traders, were a steph forward in wealthy compare with the other area Kudus Wetan. With their financial increasing, they build the traditional wooden houses of Kudus full with carved that make it different with the previous traditional houses. That is why, the amazing traditional house, which lately called as the traditional house of Kudus used to only placed in the Kudus Kulon area. At the beginning, the traditional house of Kudus only belong to the Islamic Chinese traders, but furthermore were copied and developed by the native wealthy traders.
The traditional house of Kudus that mostly build before year 1810 M, ever reach the glorious time and become a symbol of prosperity for the owners. The Kudus Kulon area environment was formed with the particular existency of the traditional house of Kudus.
The developing history of Kudus has many influences from foreign cultures like Hindu, Chinese, Persia (Islam) and Europe, which also influence the architectural field in made the traditional house in Kudus. From the research, it can be concluded that there are several motifs colouring the carving style of the traditional house. One is Chinese motif, which form as the dragon carved, Persia or Islam motif that form as jasmine flowers or the particular motif of Kudus that form as lotus flower and colonial motif that form as ropes, crown, and animals. All motifs have correlation with the incoming cultures to Kudus.
The carving art of Kudus dominate by lotus flower as the meaning of Hindu religion. Sunan Kudus introduced a carving dominated by jasmine flowers that described united one to another. The meaning of jasmine was to describe that Islam religion at that time was a small community but it like jasmine, even small, could give fragrance to the sorrounding area. Jasmine made united in one to another to describe that everybody in neighborhood were live in peace even there were differences in the religion.
Within development in making the traditional house of Kudus, influence of the elements of cultures were very viscous gave the meaning of form and function of every part, hence could be separate as follows:
1. Traditional house as the tools to spread religion (dakwah) *)
In the daily life, Kudus citizen are majority obedient muslem. Life of religious service is the social relations that have formed in the many aspects, such as in the house to live which full with the describing of the rukun Islam (Islamic obligation).
In the room inside, there is a place or room called gedongan which formed as mihrab, a place where imam (leader of praying) lead the pray that connected with the symbolic meaning as a holy place and sacral. Gedongan also has significance meaning used as the place of heirloom treasury and the wealth of the owners. Gedongan used also as the main honorables bedroom and at the particular time used as special bedroom for the wedding couple of the childrens of the owners.
Also in the room inside there are four main pillars, which called saka guru that desribe four essence of ideal life. At the top of the fourth pillars, putted tumpang sari where the roof was lying on. The sum of tumpang sari are always odd and always have a meaning, sum of five describe the amount of praying five times a day. The sum of three describe life in soul world, transitory (this world) and the world hereafter.
Front room that called Jaga Satru is provided for parish and separates into two part, left side for women jamaah (followers of imam) and right side for men jamaah (followers). Still in the Jaga Satru room at the incoming front door, there is one wood pillar in the midlle of the room which called balance pillar or soko geder, which has meaning except as the symbol of ownership of the house, it also has a symbol for reminding the resident about the One God, the only One who have to be homaged.
House as the tools to spread religion is represent through Islamic value that formed in the carved style at the partition between front room and inside room called gebyok. The strengthen element of gebyok are two stalk pillars where at its top made a carved that formed as palm of the hand of muslem when doing praying at the position of takbiratulihram (when start to pray) that always at the same time say the words Allahu Akbar which mean Allah The Mighty.
Carving in the gebyok, even it is accumulation from many culture influences, but the visualitation adopted from Arabic calligraphy with Al Quran and Hadist theme. There are many other dakwah messages that formed in the building decoration and it always about aspects of way of life and life attitude of human in do their obligation in the earth for their salvage in heaven.
2. Traditional house as a masterpiece art*)
Traditional house of Kudus if notice deeply is more and more fabulous since its uniqueness and attractiveness in exterior and interior which full with ornamen that made by highest skill woodcarving artist. Foundation of the existancy of the traditional house of Kudus was full with taste and creation that fashioned in the beautiful forms without broken any religion values. Through the activity of art, there is possibility of adding the atmosphere of the deepest metaphysic reality.
Traditional house of Kudus, if seen from Bernard Rudofsky theory, is include in the communal architect that priorities in the art element which done continuosly and spontaneously balanced by whole community with the same tradition from time to time following the ritual habit inside the communal. Art is not just copy and physical implementation of the external form, it also as the spiritual elements that achieve esthetic form. The creation becomes what it called architectural without architect.
The construction of the wooden house made completely knock down that make it easir to release and assemble hence there is possibility also to make part by part of the ornamen fully detail and accurate. The decoration was inspired by the success of temple relief and the development process was instructed by Chinese woodcarver from Sun Ging area. The owners were the wealthy entrepreneurs and traders. The carved decoration were build on the whole component intentionally without gave any empty space left and the results was very optimum, full of meaning, symbolic and the style were correlation among Java, Gujarat, Persia, China and colonial (Europe) style.
Wali Songo influence in the formed of decoration was very dominant even in Islam religion there is a forbidden in the formed of living thing, but they gave the chance of a huge tolerate formed as acculturation and assimilation on the evolutif way thus create a wonderful figurative consequence of imagination from the living thing forms. Art appreciation from the Wali Songo that full with tolerate also accomplished by khalifah in the Arab since Abbasiyah era. Palace of Harun Al Rasyid in Baghdad, palace of Al Mutasin in Samara, Cordoba mosque in Spain, also decorated by fresco formed lion, eagle, horses, and the other creatures. Drawing arts applicated in carpets, ceramics, wall and doors achieved the highest level to become the world admire.
Art ornamentation looks unite with the main building, since the creators were very concern with details, function, structure, ritual, symbol and esthetic that decoratively increase the attractiveness for whoever want to see it. The particular local habitual in the way of life through the architectural behaviour is the description of personification of the Kudus traditional house that make it different in form and style with the other joglo building in Java commonly, except in the form of the roof and soko guru as the support of the tumpang sari.
3. Traditional house as the Class symbol *)
The beautiful traditional houses of Kudus have average age for more than 100 (hundred) through 200 (two hundred). Due to the age of the building, if someone wants to analyze it, they have to use the examination within that era.
According to Prof. Berger, the structure of the Java community at the 19th and 20th century can be divided into several class such as; nobles, government officers, traders and farmers. Colonial politics at that time placed politic emancipation that have aim to liberate individual from old social band which consider shackles the freedom and law enforcement that hold mostly in the feodalism band. Development of individual in the community was appointed to the forming of personality, spirit effort in order to developing the prosperity soon.
In the other words, Kudus citizen that categories as pesisiran (near the beaches) citizen, their wealthy level mostly higher compare with the nobles and the officers at that moment. But in the daily life they did not get any self-respect and honor by the community. They way of living as a trader was qualified as second class and dishonor, hence as the compensation citizen of Kudus Kulon, that the majority were traders, formed the appearance of their house very glorious with the expectation that their too have the rights to get honor same with the nobles. The level of their house made in high five stairs to suit with the social strata like what it done by noble community. Guess from the farmers were accepted in the front room, for the officers community accept in the midlle room while for Bupati (distric chief) and Netherlands people were accepted in gedongan room. Surrounding the house was made high wall same as the form of palace.
Traditional houses that at the beginning owned by traders of Chinese moslem were copied and developed with the Javanese and Islamic values. All over the house were full of carved with ornament from many styles like in the palace of kings in Java, done by high skilled woodcarvers with very fascinating result. Accordingly, it worth to gets the confession of honor like government officers and nobles. For them, house were a symbol of status or stage that worth to get honor and equality.
(Source :* J Pamudji Suptandar, Great Lecture of Rupa art and Design Faculty of Trisakti University/Adopted in English by Deva's father)
The fascinating wooden carved at the traditional house of Kudus must be come from the very skilled woodcarvers. Then, from where the woodcarvers came from?
The carving style of the wooden traditional house of Kudus was quite distinct from the other famous carving centre in Java, Jepara. Historically, Kudus was a carving centre long before it developed as a skill in Jepara. Carving was introduced to Kudus when an emigrant from the famous carving city of Yunan - China, The Ling Sing, arrived in the 15th century. He came to Kudus not only to spread Islamic teachings but also to devote his skills to the art of woodcarving, and his style, Sung Ging, was famous for its smooth and wonderful woodcarving masterpieces.
The Ling Sing was wellknown as mubaligh (spreader of Islam) called Kiai telingsing. The name of Kiai Telingsing until now use as a name of a street in Kudus city. There is a kampong or village surrounding the street called Sunggingan that predicted came from the Sun Ging name. The area, at the past, was belief as the resident of the woodcarvers and carpenters from the devotion of Kiai Telingsing skills.
From the 16th to the 18th century, woodcarvers in Kudus received many orders to construct wooden houses. The main material - highest quality teak - was supplied from Blora's, Tuban's and Bojonegoro's forest. From the 19th century, however, high quality teak became scarcer and scarcer and this, in turn, discouraged the woodcarvers of Kudus to develop their skills.
The carving skills also belong to Jepara's people and has been very famous until now. There is an opinion, which said that wooden carved art in Kudus also done by woodcarvers from Jepara, eventhough in the reality it different in the carving models, especially in the mission and filosophy.
According the history, Mantingan mosque in Jepara has wall that made from carved white stone with the flower motifs that was masterwork of a Chinese called Tji Wie Gwan who brought by Raden toyib to Jepara after come back from his Islamic study in Campa for five years. Raden Toyib then married with Ratu (queen) Kalinyamat, the very famous Jepara's queen at that time.
For his achievement in build Mantingan mosque at the year of 1559, Queen Kalinyamat and her husband gave a new name for Tji Wie Gwan to become Sungging Badar Duwung, Sungging means carving expert, Badar same with stone and Duwung means tatah (tool for carv).
This Sungging Badar Duwung who then recognized as the root source of the Jepara's carving art which consecutively knowing in all over Indonesia and the world. According to history, he was too takes a part in the erection of mosque in Loram (a name of area in Kudus) and mosque of Menara Kudus.
Sungging Badar Duwung then devoted his skill to the surrounding community in Jepara as well as in Kudus and presented high skilled carvers that from time to time growth in numbers. This skill direct and indirect was useful in the process of developing the traditional house of Kudus.
The certainty of mentioned things were still need to be investigated furthermore. But for sure, the traditional house of Kudus has build and become one of the Kudus markers with its fabulous woodcarving.
281 Child's Bookcase Episode 4
00/00/0000, 00:00 | Matt's Basement Workshop PodcastTime for the next installment of the Child's Bookcase Project. We're nearing the completion of the project and in today's episode I demonstrate resawing and shiplapping of stock for the back.
I can't say enough about how easy the resawing went with my WoodSlicer Resaw Blade from Highland Woodworking. If you're in the market for a great blade, this one does an amazing job. It resawed 4/4, 4" wide red oak boards on an 1/3 HP, 50 year old saw like it was slicing bread (no exaggeration!!)
Speaking of Highland Woodworking, stop on by and enter for a chance to win a Festool Kapex during their 30th Anniversary Giveaway.
If you'd like to enter for free schwag or just have a comment, question or suggestion drop me a line at mattsbasementworkshop@gmail.com or head over to my website at www.mattsbasementworkshop.com or call our Skype Voicemail at 231 354-2338.
If you have the time, please take the new listener survey.
To download directly to your computer Right Click on direct download, choose "Save Target as"
289 A New Workbench Top
00/00/0000, 00:00 | Matt's Basement Workshop PodcastNot so long ago my workbench's top was the perfect surface for almost all of my needs. It's always been a little short, but the weight was perfect for handplaning.
When I discovered how unflat it's become in the last few weeks it was clear it needed to be replaced. The question on my mind is what should the top be made from?
I need something flat, something reliable and more importantly something that could get me back in the shop in no time...
WIN AN iPOD TOUCH!! If you have the time, please take the new listener survey, and when you do you'll be entered to win an iPod Touch.
If you'd like to enter for free schwag or just have a comment, question or suggestion drop me a line at mattsbasementworkshop@gmail.com or head over to my website at www.mattsbasementworkshop.com or call our Skype Voicemail at 231 354-2338.
Listen to today's show by clicking on the player below
To download directly to your computer Right Click on direct download, choose "Save Target as"
Review...
00/00/0000, 00:00 | PhilsvilleWas pleased to turn on the computer this morning and find this review......
Glad you liked the plane, Chris!
I better get back in the workshop, then :)
Cheers
Philly
Do You Wear a Respirator?
00/00/0000, 00:00 | WoodworkingONLINE.comI’m keenly aware of the affects of breathing in too much dust thanks to an unfortunate attempt years ago to carve a duck decoy with a moto-tool! Now, whenever I’m sanding or routing (or doing any job that produces a lot of fine dust) I wear a dust mask. The problem with your typical dust mask is that they don’t work very well.
Believe me, this is not an area where “good enough” suffices. You certainly don’t want to scrimp on dust protection, but too often I’m using an old mask that’s past the point of effectiveness. That’s why I recently spent the money on a half-mask respirator (photo at left). I like this 3M product for several reasons, including the fact that it’s comfortable to wear and economical (they retail most places for around $10 - $12).
But the thing I like best about it is that there are a wide variety of filters available. There are cartridges and filters designed to be used when working with sawdust, as well as fiberglass insulation, pesticides, lawn chemicals, and spray finishes. The respirator I purchased didn’t come with a cartridge included, so I was able to save a little by buying just the ones I needed.
I picked up my respirator at McFeely’s.com, but they’re available at several locations including Ace Hardware and Lowes.
I Lean to the Left
00/00/0000, 00:00 | The Village Carpenter
Some of you may be surprised or even a little disappointed to hear that, but it's true.

No matter how hard I try to keep even pressure on my plane, the edge I'm jointing becomes sloped to the left. Knowing this about myself, I take a conservative approach to jointing by frequently checking my progress with a square.

You might think the way to remedy the problem is to lean to the right. But that would only result in a peaked ridge down the middle of the board with slopes to the left and to the right.

Instead, seat your plane firmly on the right side of the edge of the board (photo 3), being sure to keep the plane perfectly flat. Don't get too radical—only take a pass or two. As you continue to plane, gradually migrate towards center until you produce a shaving that equals the entire width of the edge.
I'll continue to practice and someday I'll be able to take moderately level shavings right from the start.
That's because keeping centered is my primary focus.
Podcast #33: Quick & Easy Joinery
00/00/0000, 00:00 | WoodworkingONLINE.comIf I had the time, I’d build every project with hand-cut mortise and tenon or dovetail joinery. But that’s not a very realistic goal, nor is it necessary. There are plenty of joinery methods out there that can be made both quickly and easily. During the seminar podcast, I’ll talk about three of my favorite “quick and easy” joinery methods.
One of the most “traditional” methods is the lap joint. It’s easy to cut with just one setup on the table saw. And it provides plenty of face grain gluing surface as well as a good amount of mechanical strength.
For a couple of “modern” joinery techniques that are especially quick and easy, you’ll have to purchase specialized machinery to produce them. I’m talking about biscuit joints and pocket hole joinery. Both of these methods get their mechanical strength from distinctive fastener’s — biscuits or pocket screws. But the best part is that each can be setup and cut in seconds.
Be sure to check out the Woodsmith Podcast Store for links to a few products that I used during this seminar.





