If you find there is any copyright abuse, contact us as soon as possible, thanks.
History Of Traditional Kudus House
06/26/2007, 11:15 | Antique Knockdown Carved Wood House Kudus is a city in the Central Java, Indonesia, located among Jepara, Demak, Pati, and Purwodadi districts and in the route of Semarang the capital city of Central Java to Surabaya (please see location map). Based on story, Kudus name was from Al-Quds, which mean holy.
Traditional house of Kudus if notice deeply is more and more fabulous since its uniqueness and attractiveness in exterior and interior which full with ornamen that made by highest skill woodcarving artist. Foundation of the existancy of the traditional house of Kudus was full with taste and creation that fashioned in the beautiful forms without broken any religion values. Through the activity of art, there is possibility of adding the atmosphere of the deepest metaphysic reality.
Teak Antique Traditional Kudus House
06/04/2007, 05:46 | Antique Knockdown Carved Wood House The architect mostly achieves the ideal process of culture combination and success to represent a unique colour of
The roof construction of traditional house of Kudus shows the level of wealthy of the owner since cost to make the roof is the highest cost compare with any other parts of the house. The expensive cost was because of the motifs perfection and the carved style also the difficulty on the process to construct it.
The Pencu style roof (the towering roof) used to be made of Rumbia (a particular kind of palm leaves), but now more likely to be made of tiles. Kudus tiles often have special plant motifs, and there are the so-called genteng gajah (with elephant ornamentation) on the wuwungan (the topmost row of tiles), and the genteng raja (king tiles) which are beautifully decorated.
The design interior of the traditional house of Kudus looks simple and divided into Jogo Satru room as a guess room, which in the standard traditional house of Kudus the cover area is around 3 x 10 msq. In this room, the floor is lower around 1 m from the main room (inside room) and is a part of the fourth step or floor.
Then, inside room (jogan lebet) is a fifth step with area around 7 x 10 msq. A chair uses as the connection between the two rooms because of its level differences.and as partition between the two rooms used Gebyok.
Inside the inside room (jogan lebet), there are several rooms such as living room located below the joglo, then bedrooms and gedongan as the place to keep the heilroom and wealthy. Gedongan placed between inside room and pawon (kitchen) that located in the left or right of the house.
This pawon except use for cooking and dinner room, also use for the family activity, such as made of convection products and other home industries. In front of the pawon, precisely in the edge part of the yard placed well complete with the bathroom.
There are several types of doors in the traditional house of Kudus, there is one door, two door and sliding door. One door is usually for the kitchen, two doors in gebyok and the sliding door is in the front.
One thing that necessary to be noted is that traditional house of Kudus always build face to the south that full with the philosophy meaning and based on the natural rule of rational calculation.
Rosewood friends
00/00/0000, 00:00 | Wooden Rings from Touch Wood RingsSince we both make a living with our hands, we are having a friend weave hemp necklaces for us to put the rings on while we are at work so now we are searching for some nice wood beads to put in the necklace. We would like to thank you, not only for all your time, effort and love that you put into this process, but also for being the beautiful people you are and for providing people with such a fantastic way to symbolize their commitment and love.
Words cannot express how much I have enjoyed this process starting from the moment I found your website and instantly knew I was in the right place. You will always be in our hearts."
Wooden Rings and Gentle Souls
00/00/0000, 00:00 | Wooden Rings from Touch Wood RingsKoa, ash, purpleheart, juniper heart wood and maple wood rings.
Their wooden wedding rings ~ his blackwood with a rose wood band and hers of rose wood with a ecalyptus liner.
"On Friday night we went back to the pier that we got married on and said our vows to each other again and gave each other the rings. It was wonderful and we feel so great about our natural, handmade rings; more meaningful than we could have ever imagined! "
She said yes! Just wanted to send you a few pictures of our engagement. Patty loves the ring - it was a perfect choice! Thank you again for all your help and advice, it really paid off!
"Wow!" is the closest I can come to descibing the intricate detail and beauty that this ring possesses. The ring looks so nice against his skin tone. I just love it! Working with you guys has been such an amazing experience. I really admire y'alls lifestyles and your positive happy attitudes! It has been such a pleasure."
Oak wood rings ~ hers with a willow band and his with a cedar band.
Grenadilla and Hawaiian Koa Wood Engagement Ring
00/00/0000, 00:00 | Wooden Rings from Touch Wood RingsThank you again for the beautiful ring you created for Vivianne. I proposed to her on December 21st and she said yes!! She was totally amazed by all the details and precision of the ring. It was her dreamed engagement ring and she is so thankful. After I proposed, we organized a gathering with our families to celebrate our love. I want to thank you both for your hard work throughout this process and for being what you are and living what you believe in.
Taming the Wild Remotes
00/00/0000, 00:00 | Wood Destruction by a Woodscrub
When I was writing my review of the Harbor Freight Cen-Tech Digital Angle Gauge I realized I hadn't really used it for anything other than setting my tools to 90 degrees. So I took a quick survey of what wood supplies I had in the garage.
As I walked into my bathroom I found my wife had used some fugly light blue plastic drinking cups to put Q-tips in. *MY* bathroom! The horror! I realized then I had to make me a Q-tip holder that would look nice in my bathroom on my redwood shelving. But I really didn't want to make it out of redwood. That wood is so brittle I cringed at the thought of getting accurate angles without splintering.
Hmmm... I have a few boards of purpleheart, some "hobby wood" curly maple boards from Lowes, some scraps of poplar, a bunch of redwood... I got nuttin'.
But 1/4" maple with some purpleheart strips would be nice! And a perfect use for my angle gauge!
I decided on a hexagon shape, using six strips of purpleheart cut with a pair of 60* angles on the long sides and 1 1/2" strips of curly maple.
I first cut the purpleheart using a scrap of wood for a pushblock and the blade set to 60*. I got that 60* setting by dividing the number of degrees in a circle, 360, by the number of sides in my project, 6. 360 / 6 = 60. The cuts were made with my Delta/Leitz 24 tooth rip blade. That blade leaves such beautiful cuts...

That was easy enough. But the maple cuts weren't. I have a large crosscut sled I made for making some table miters when I first got this saw. But it is really unwieldy when using for small parts. So I had to make a small 48" x 24" crosscut sled. No construction pics, but it's 3/4 MDF with doubled up 1/2" birch ply for the handles. Simple, sturdy, and accurate. It also makes me feel MUCH more comfortable cutting small parts on the table saw. Especially using the David Marks trick of a pencil eraser as a hold down.
- NOTE: When using a stop block with a crosscut sled, you MUST hold down the piece between the block and the saw blade. Kickbacks are fierce when a piece gets wedged in there. Ask me how I know...
The maple was 3 x 2 1/2". I cut six identical pieces with the crosscut sled and a stop block. (This is where I learned about holding down the piece between the blade and the stop block!)
I set up my router table with a 1/4" straight bit, set 1/8" high with the fence 1/4" from the front of the cut. This gave me a 1/4" x 1/8" rabbet to set the bottom of the cup into. I ran all the maple as well as the purpleheart through the router.
I placed two strips of blue masking tape, sticky side up, on my bench. I then clamped a straight edge to the bench a little ways below. The straight edge was the register for my parts to keep them aligned and give me a cup that is square to the world.Once I was happy with the alignment, lack of gaps, and the test fit went well, I brushed Titebond II on all the joints and rolled it up. The overlaps of tape held it together and acted as a clamp. No strap clamp needed on such a small piece. I left it to dry overnight.

The next day I set up my sled again to trim the proud bits of purpleheart. The sled really came into its own for this part since I needed to make 6 identical cuts.

I used my cabinet scraper to clean up the outside of the cup and ease the edges, gently rounding the joints between the maple and purpleheart.

To fit the bottom I used a scrap of 1/4" poplar with the outside of the cup traced to it. I rough cut it on the bandsaw then used 60 grit sandpaper to fit in the rabbet around the bottom of the cut. Once it fit I used a cabinetmaker's triangle to mark the correct orientation then set it aside.
I sealed the inside of the cup and the bottom as separate pieces with some Zissner SealCoat. I'm trying to use this stuff up before it goes bad. It's the same stuff I put on the crosscut sled I made during this project. I don't like how it looks compared to "real" shellac, so I use it in places that aren't seen, or I don't care how it looks. I have started mixing my own shellac from flakes distributed by Hock Finishes and denatured alcohol. The lensing effect of the home mixed shellac is far superior to that of any of the canned finishes I've tried so far!

After two coats of the Seal Coat had been applied and dry, I applied self adhesive felt to the inside surface of the bottom and the inside of the cup.
Yes. It's red. So sue me.
This self adhesive felt is available at WalMart for around a buck for an 8x10" sheet. It took about 3/4 of a sheet for this project. And it was my last sheet of any color (that's why I used red). I need to stock up again.
Once the adhesive had a chance to become permanent, I trimmed around the rabbet and lip of the cup with an X-Acto knife. I double checked the fit of the bottom. It fit a bit proud, as I expected because of the felt. I brushed on the glue and clamped it for an hour.
Finally, I hit the bottom with my belt sander to make the bottom flush with the sides and applied 2 coats (so far... more to come tomorrow) of my home mixed shellac in a 3 pound cut. I brought it inside to hopefully harden completely before tomorrow morning so I can smooth the finish with some 400 grit paper and apply 2 more coats.
While I was sitting in my chair holding it and admiring (we all do that right? I'm not crazy? Hello? Anybody?), I realized I had made it too big for Q-tips. I'd have to have a full package in there all the time. Ugh. So I set it on my purpleheart and maple side table (noticing a trend?) and picked up a Lee Valley catalog to let my mind wander for a few minutes.
My 4 year old daughter came up and dropped a remote in it. "Nice, Daddy! A new remote holder!" She ran off to do whatever 4 year old girls do when they run off.
I, on the other hand, was stunned. Why the !@#%@$^# hadn't I thought of that? The wife had been kvetching about the remotes for months. Somehow she thought getting Dish would mean only one remote.
I know, I know. What can I say? Don't your wives hate the remotes too?
Anyway, it now has a permanent place in the living room on my maple and purpleheart side table. At least it matches.
And I still have an ugly light blue plastic drinking cup in my bathroom. But now its mate has come down to hold Neosporin tubes.
Why can't she just stay out of the Guy's bathroom?

