?????????????????????
??????????????????????????????
???????????????????????????????????

I visited Yamanaka, Japan's biggest woodturning town this summer. There are fifty woodturners (!) who make their living by turning bowls and plates.
There was a Japanese pedal lathe at the Traditional Industry Museum. Such pedal lathe were used in the late 19th century.





?????????????????????????????????????????????????????????????????????????
???????????????????????????????????????????????????????????????????????????????
I was wondering why Japanese pedal lathe has two pedals for each foot. You need to tread with one foot when you shave, and tread again with the other foot when you don't shave.
Western pole lathe has only one pedal and you need to tread when you shave the wood. Then the spring of the pole pull it backward.

???????????????????????????????????????????????
??????????????????????????????
A hint to answer this question came to my mind when I saw the master woodturner Mr.Satake's work at his workshop.
He is turning with a gauge on this movie. The lathe is turning clockwise.

???????????????????????????????????
?????????????????????????????????????
The next movie shows Mr.Satake using a scraper. The lathe is turning anti-clockwise.
Japanese woodturner changes the direction of rotation frequently while turning.

???????????????????????????????????????????????????????????????????
???????????????????????????????????????
The twin-pedal lathe makes sense if they were turning like this in the old days. You get enough torque when you need it with two pedals.

Tommy works on the "really tough" drawer fronts, eight in all. He's trying to "elevate his game," but the project is "starting to get" to him, especially because of all the tiny pieces of wood. But Tommy is satisfied with the finished pieces and determined to keep moving forward.

It’s been a rough week. Sunday night, I was in my shop working on a small project. It was nearing dinner time and my wife stepped into the shop to inquire about my plans for dinner. I was in the middle of resawing a small workpiece. I knew she was standing there, so it didn’t startle me. But something happened to the workpiece and in a split second it kicked back with a loud bang. I instinctively shut the saw off and reached for the workpiece.

Then I saw it. The workpiece was not the only thing I was cutting. The end of my right thumb had somehow come down directly on the spinning blade. I hadn’t even felt it.  Yet. My wife saw the whole thing happen.

The end result after some microsurgery is a shorter thumb without a thumbnail. I’ll spare you all the gory details. The prognosis for a full recovery is good after some physical therapy.

But what I have left to deal with now are all the questions. And anger and blaming myself for letting it happen. I haven’t been back to the “scene of the crime” since it happened. I suppose I’ll have to face up to it here in the next day or so.

I lay awake at night second-guessing myself. Not believing that I’ve been woodworking for over 30 years without serious injury.  The full range of emotions and “what-if” scenarios.

I’ve already wrestled with the 100 different ways I could have accomplished my goal that night. And what I should have done differently. The constant blame game you play in your mind.

But that’s behind me and life must go on. My point of telling my story is that you should always listen to that voice in your head that says, “Perhaps I should do this another way.” For that’s exactly what I was thinking precisely one-half second before I permanently injured my thumb.

The June 2008 Newsletter has been Posted. Go to Club Menu and click on Newsletter.

???????????????????????????
????????????????????????????????????????????????????????
Mr.Hiraide visits our college at this time of the year.
He comes from Sanjo, Niigata, a production centre of knives and blades. He is a famous tool shop owner who travels around Japan with his van full of hand tools.

????????????????????????????????????????????????????????????????????????????????????????
The freshers buy hundreds of dollars of hand tools at this time. A couple of hand planes, chisels, sharpening stones, scales...these are the tools they must have at the beginning. They build their own collection of tools from here.

??????????????????
???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

Mr. Hiraide doesn't stop talking while selling his tools.
He talked about a short stop in Osaka to see cherry blossoms, a visit to a carpenter in Shiga whom he saw on TV just the day before. He loves chatting, traveling as well as his business.

You can sharpen your woodworking skills with helpful tips and techniques from the editors of Woodsmith and ShopNotes magazines. Get a FREE tip sent to your email address each week! Go to WoodworkingTips.com and sign up today.

Here’s last week’s tip from ShopNotes online editor Phil Huber:

My workshop shares space with the family car. So it’s important that all of my power tools be portable and take up as little space as possible. So I made the fold-up router table you see here.

I made a simple router table top and attached it to a pair of 2×4’s with screws. Then, after removing the top of an adjustable clamping table, I mounted the router table to the clamping table stand, as shown in the left photo above. The table is firmly supported by the clamping table base.

The nice thing about the table is it can be raised and lowered to match the task at hand. Best of all, I can remove the router and quickly fold the table up to store it against the wall whenever it’s not in use (right photo).

If you’d like to see other router table plans, just go to PlansNOW.

Good Woodworking,

Phil Huber
Online Editor, ShopNotes

Send for a preview issue of ShopNotes magazine

My wife asked me this question tonight: "Don't you have enough"?

Of course she was referring to my announcement that I was headed out to see if I could get some more of that Baltic Birch scrap wood from the local furniture shop.
My answer was simple, it was: "No"

so I ask you... how much is enough when it comes to free scraps of Baltic Birch plywood? The first picture in this group is what I picked up in this trip.











I still think the answer is no...

Changes are a comin’. Delta/Porter-Cable announced at a gathering at AWFS last night a major revamping of their product line. Lower-end products are going away. Newer products are on the horizon. The focus will be on quality with an emphasis on a new look and major efforts in industrial design of the products. One example cited was a new Unisaw with both wheel cranks on the front of the saw. It’s a unique concept that should have been done years ago. The new Unisaw will also have upgraded guards and all upgraded internal components. (It was interesting to note that the guard on the prototpye looked suspiciously like the guard on Bosch’s new benchtop saw.)

They announced a “re-branding” of sorts where you will see the Delta/Porter-Cable names together more and more as time goes on. Their design center will remain in Tennessee and they are sourcing major components from U.S. suppliers and not necessarily from Asian suppliers.

Company executives admitted that there have been some bumpy roads for the two brands since their purchase by Black and Decker three years ago. They expect that the dollars and man-hours that have gone into re-engineering their product lines will have benefits for the woodworker and their bottom line with improved sales. They may be facing an uphill battle, but hopefully we’ll see some new, quality innovation in tools. Both brands have a century of reputation in quality and hopefully, they’ll be able to regain that respect.

P.S. — I would have posted photos of some of the tools, but company execs prohibited cameras. Some of the products shown are prototypes and all features shown may not necessarily make it into production models. I can understand and respect that. So stay tuned. As we hear more, we’ll post it here.

UPDATE: See the Press Release from Delta/Porter-Cable here: REVOLUTION Press Release

Learning to cut woodworking joints is one thing. Figuring out how to assemble all those joints in a correct and efficient order for a project is another skill entirely.

In the upcoming Fall 2008 issue of Woodworking Magazine, we're delving deep into the topic of cabinet construction. And the method we have developed during the last decade is different than any other you have read, but it will do three things for your woodworking:

1. You'll make fewer mistakes and waste less wood.

2. You'll have an easier time fitting your doors and drawers.

3. Your cabinets will go together faster with tighter joints.

If you'd like to learn about our new method, then I encourage you to subscribe to the magazine by May 30 to guarantee you will receive a copy of the Fall 2008 issue. In addition to our research into cabinet construction, you'll also find:

Fitting Doors & Drawers: We show you how to square up doors with a table saw and fit it precisely with a hand plane. Plus, we explain how to size your drawers so they'll fit properly with only minor adjustments with a plane.

Tool Review – Sliding Bevels: Why do so many of them slip and slide around on you? We investigate the major brands available today and find the best ones.

Coloring Walnut: Walnut with a simple clear finish looks cold and lifeless.
We show you how to warm up this beautiful wood with a variety of approaches, including shellac and stains.

So why should you subscribe to Woodworking Magazine? We think it's different than every other magazine out there. It's written to help all woodworkers fill in the inevitable gaps in our skills that result from teaching ourselves woodworking.

We show you the historical, time-tested and frequently forgotten methods to saw any joint, drawboring, wedged through-tenons and splines. We review tools that other magazines won't touch but are extremely important: like 6" rules, screws, combination squares and moisture meters.

Plus, we offer projects you won't elsewhere. We build only time-tested forms in classic styles, such as Arts & Crafts, Shaker and early American. More importantly, we pick projects that can be built without an enormous outlay of time, wood or tools.

And that's not all that's different. Woodworking Magazine has no advertisements and is printed in glorious sepia-toned black-and-white on its inside pages.

If you're ready to subscribe, we're ready to take your order. Click here and we'll sign you up to receive the next issue.

— Christopher Schwarz

Hi Folks
Time for another woodworking show - Yandles in Martock, Somerset.
I do enjoy Yandles, a twice yearly event. It is held in a working sawmill and has a wonderful atmosphere - huge woodworking machines lurking everywhere, stack after stack of planks air drying in the fields and the smell of tannins in the air. It's not the biggest show but definitely the friendliest.
I'll be there Friday and Saturday - do pop by my bench and say hello!

Back in the workshop I've been busy with the Rosewood again. Just finished a Luthiers Scrub plane - a lovely little plane. The sole is gently curved in both directions (front to back, side to side) which allows you to cut hollow surfaces. If you've ever used a curved spokeshave you've probably found it a bit difficult to keep the tool cutting throughout the cut - this scrub is completely different! It is so simple to use and has a very shallow learning curve. I was so pleased with the way it worked I had to make one for myself, so a baby version in Pau Rosa was born :)

So - better go pack the van ready for Yandles.
See you there?

Philly

Quad Tapering and Al Babble--Tommy and Al sit down to talk about the spade foot of the Federal table. Tommy outlines how he used the drill press to create the spade foot on the marker board and then reviews how he created the tapered table leg. Al concludes with discussing the Red Sox season opener.

If I had the time, I’d build every project with hand-cut mortise and tenon or dovetail joinery. But that’s not a very realistic goal, nor is it necessary. There are plenty of joinery methods out there that can be made both quickly and easily. During the seminar podcast, I’ll talk about three of my favorite “quick and easy” joinery methods.

One of the most “traditional� methods is the lap joint. It’s easy to cut with just one setup on the table saw. And it provides plenty of face grain gluing surface as well as a good amount of mechanical strength.

For a couple of “modern� joinery techniques that are especially quick and easy, you’ll have to purchase specialized machinery to produce them. I’m talking about biscuit joints and pocket hole joinery. Both of these methods get their mechanical strength from distinctive fastener’s — biscuits or pocket screws. But the best part is that each can be setup and cut in seconds.

Be sure to check out the Woodsmith Podcast Store for links to a few products that I used during this seminar.

We are having a one week half term so that the students may have time with their families, and in Yonatan's case go walking and ...

Most of you know how much I like Andre Roubo's "L'Art du Menuisier" – probably the best and most complete books on woodworking from the 18th century. Heck, I've even considered taking up my French studies again just to be able to read it (more on that later).

However, getting copies of Roubo in this country has been nothing less than frustrating. I got a couple modern reprints through a bookstore in Quebec. And several French web sites carry them (with ghastly hoops to jump through to get them into this country). And all of my efforts to get a reliable and reasonable source in North America have proved fruitless.

Until today.

Thanks entirely to Joel Moskowitz at Tools for Working Wood, reprints of all five volumes of Roubo are now available for sale. These books are immense fun to page through, even if you don't read French. That's because the plates – hundreds and hundreds of glorious line drawings – will teach you more about furniture, marquetry and hand tools than I can. Plus you likely will be inspired to build one of Roubo's benches once you see them in use throughout the book. That's what sold me.

The volumes sell for $70 to $90, which sounds like a lot, but it's worth it. When I was importing these from Canada, that's about what I ended up paying (maybe a bit more once you included international fees). These books will be with you forever, and who knows how long they'll be available.

The other news is that we have some more exciting news about Roubo that we'll be announcing on my personal blog this weekend, LostArtPress.com. This is a personal project that I and another woodworker have been slaving over for a while. So do drop by LostArtPress.com this weekend and check it out. I think you'll be glad you did.

— Christopher Schwarz

I've successfully added a new feature to the Norse Woodsmith website - blog feeds directly from some of my favorite woodworking bloggers - including Chris Schwarz, Adam Cherubni, Alice Frampton (Alf, at the Cornish Workshop), Gary Robert's Toolemera blog, and others.  There are links to their latest blogs at the bottom of the page, and a link to a list view of posts arranged by individual blogger) or, if you prefer, the latest posts in their entirety by following the links in the "Community" pull down menu above.

I'll be adding more as I come across more that I feel have relevant content...  and blogs older than 16 weeks are automatically purged.  I enjoy reading all of these blogs on a regular basis, and hope you find them interesting as well.

Leif

Post Script:  These blogs are not located on this web site - they are simply RSS feeds from the individual's sites and contain only content available via RSS (no web site content).  Clicking on some of these links (such as those at the bottom of the page) will take you to those web-sites directly.  I am not responsible for the content of these feeds.

Note - if you are the owner of one of these feeds and do not wish me to publish it here, just let me know and it will be removed.  But if that is the case, for your benefit I would suggest you not publish the content via RSS...  Or set your teaser length to get people to click a link to "read more" on your own site.

It's near the end of July and  it's time to give away some great schwag to some even greater listeners!!

This week we have another set of 2-1/2" Whiteside Brass Height Gages for one lucky winner and another great title from Sterling Publishing for a second lucky listener.

If you're interested in getting a set of your own gauges from Woodcraft click here, Whiteside Brass Height Gauges.

WIN AN iPOD TOUCH!!  If you have the time, please take the new listener survey, and when you do you'll be entered to win an iPod Touch.

If you'd like to enter for free schwag or just have a comment, question or suggestion drop me a line at mattsbasementworkshop@gmail.com or  head over to my website at www.mattsbasementworkshop.com or call our Skype Voicemail at 231 354-2338.

Listen to today's show by clicking on the player below

powered by Podbean.com

To download directly to your computer Right Click on direct download, choose "Save Target as"

I know….no blog postings for ten days and now two in one afternoon….

About 11 days ago I told of my adventure removing a splinter by myself while Gail was off visiting her sister in San Francisco.

Well, today tragedy struck again. I got another splinter but this one came from doing something we’ve all done at one time or another. I refer to the painful “reaching into the briefcase� splinter.

I happened to look in my briefcase today, and I saw that the center compartment is still filled with Euro coins from where I was in Ireland 2 months ago. So I decided to clean them out. I reached down in there and began scooping them out when I felt the most intense pain of my life.

Having never passed a kidney stone, here is the previous personal pain record holder: I was carrying the ball and had enough steam built up that when the defensive guy hit me he sort or bounced off, and as I kept running his attempt to grasp me caused him to slide down my body. With my left foot planted on the ground this guy’s knee came down right on top of my left foot, breaking 3 of my Metatarsals. (Shout out….Dr. Steve Ahlfeld…thanks again for fixing my foot. All these years later I have NO issues, even when the weather changes. It’s perfect.)

Anyway, broken metatarsals are nothing like the pain I felt prior to pulling my hand out of my briefcase and seeing a huge splinter jammed up under the fingernail of the middle finger on my right hand. Yes, just like some kind of sadistic POW torture, I had put the equivalent of a toothpick under my fingernail and broken it off.

It doesn’t help that I have a problem with biting my fingernails…

Strangely, the splinter only hurt on the way in. Having found its equilibrium, it was not causing any pain as it just sat there. Still, I couldn’t leave it there.

Gail won’t be home until Tuesday. (I know…she has been in San Francisco LONGER than we were in Ireland….) I don’t think it would be good for this splinter to wait that long. What if the nail grows over it, trapping it in there? Also, I don’t know what species it is. It could be Cherry, but it might be Padauk…and I just don’t like the thought of African wood living under my fingernail. What if it leads to Ebola? Laugh all you want, people, but none of us actually knows for sure….

So I had no option but to cruise over to PrimeCare (it’s cheaper and faster than the Emergency Room). However, when I got there I found there must be influenza sweeping through the blueberry farms of West Michigan because it seems every migrant farm worker in the area was there with a sniffling horde of kids. I asked, and a nurse confirmed they had a full crowd in front of me. So l left and went to lunch.

I drove 25 miles away to my favorite place to eat (BW3s) and used their free WiFi to email my tale of woe to my wife who was 3 hours behind me on the west coast. I ate my food while asking all of my favorite waitresses if they would like to earn some extra cash going after the splinter…no one needed the money that badly.

So I used the internet to find the closest medical facility. When I arrived at Spectrum Hospital’s Urgent Care facility, I found no migrant farm workers…only trained medical professionals looking to help.

The Physician’s Assistant asked if I wanted to try to tough it out or if I wanted to take the sure fire painless route. He misinterpreted my answer and the next thing you know I am “toughing it out.� Basically he just jammed some tweezers under my nail and yanked that bad boy out.

I have posed it with a dime (and a 10 cent Euro coin) for size comparison.

Is there a lesson to be learned here? Perhaps I should not be left home alone in the future???

What does it say about my woodworking toughness when I get doctor-worthy splinters just reaching into my briefcase?

It’s probably a good thing that I am more into hotels than tents. It’s really best than I don’t like to go camping. To quote the Lemonheads….Honey, "I lied about being the outdoor type.�

Hey everyone, today we have the featureless friday!  More or less, I've been bitten by a bug and I've down for the count since tuesday.

But that's no excuse for not having a show and not giving away free schwag to the greatest listeners in the world!!!

So I have a few things to share with you and a little fever ridden rambling too!!

Don't forget!! Hendrik is back in September so get your questions in for our open Q&A session.  If you're planning on being at the IWF in Atlanta, anyone wanting to have a chat with Hendrik can leave a message for him in the Press Lounge.  Or, better yet, he'll be attending The Wood Whisperer's after-show get together Friday evening, August 22nd.

If you'd like to enter for free schwag or just have a comment, question or suggestion drop me a line at mattsbasementworkshop@gmail.com or  head over to my website at 231 354-2338.

Listen to today's show by clicking on the player below

powered by Podbean.com

To download directly to your computer Right Click on direct download, choose "Save Target as"

Tommy discusses how he tackled the most difficult part of secretary so far, the compound return angles at the top of the pediment. The moldings in the front and the side look the same but are completely different. He moves to the bench to illustrate the problem and how he cut the moldings to fit. As viewers can see from the disastrous state of his shop, this problem was a tough one.

Rockler currently has their 4-in-1 screwdriver kit on sale for $5.99 so I grabbed a couple. I needed some screwdrivers for work anyway, and thought this would be a great chance to try turning one myself.

The handle is cherry, and the black lines were done by wire burning, a technique where a stiff piece of steel wire is held in a groove cut into the spinning workpiece. Hold the wire in the groove until it starts to smoke.

The hole for the shaft is made with a 5/8 spade bit on my craptastic drill press. The hole isn't perfectly straight, unfortunately. I really need a new drill press! The head of the unit shifts when pressed down into the cut causing an angled hole.

The finish is a 3# cut of amber shellac applied over some BLO (boiled linseed oil). I rubbed the shellac into the spinning handle on the lathe. Gave it a wonderful hand rubbed look.

If you get a chance, give one of these screwdrivers a try. Lots of fun and useful too!

Every fall for the last 15 years or so, the Woodsmith Store has ended the month of September with two events — the annual Fall Fair and the start of the woodworking seminar season. This year is no exception with one small difference. This will be the first year that several of the presenters at the seminars will also be cast members on America’s newest woodworking TV show — The Woodsmith Shop on public television.

As many of you know by now, the first episode of The Woodsmith Shop will air on Iowa Public Television at 6:30pm on Friday, October 5th. And hopefully, by the end of the year when the feed will be available to the rest of the country, the show will be picked up by stations around the U.S. (For more information, go to WoodsmithShop.com. Randy Maxey will also post more about the show soon.)

The same tradition is being carried on every week during the woodworking seminars at the Woodsmith Store in Clive, Ia. They’re held each Thursday evening (from September through April) in a 200-seat auditorium with a fully-equipped shop. Seminar topics for this fall range from “Top 5 Shop-Built Router Jigs” to “Tips for Working with Plywood.” Season and single tickets are on sale now at the store. Plus, this year the one-hour seminars will be supplemented by two 4-hour hands-on workshops held in December. Space is limited to six for these sessions though, so sign up soon.

Tommy and Al sit down to talk shop and discuss plans for a small project building a table. The project will be simple and take under 60 hours to complete. Tommy and Al first review the general design of the table and then discuss the power and hand tools that will be needed. Tommy stresses that it will be a low budget project that will produce a beautiful table.

I am excited about the latest DVD as it concentrates on techniques for chisel use.

Chopping and paring ...

I know, I know, I know….it’s been a week.

Were you worried? Any chance you thought I had been sucked into a machine and was still spinning around the cyclone just waiting to drop down into the dust bin?

Well, it’s nothing that dramatic. Instead, I have just been distracted by things in life other than the blog. I’m sorry. I know you deserve better.

Today on the way to work I started fixating on all of the pressures and distractions that we face in life, and the next thing you know in an effort to find clarity I was scribbling out my random, deep thoughts as I drove along.

This morning I bypassed the 40mpg economy of the Jetta in favor of the top down sun-basking glory of the Benz, and I think that (the near heat stroke from the sun) is what led to the eclectic mix of today’s thoughts .

Without further babbling, here are today’s little nuggets....or as the late, great Mr. Carlin would say....today's Brain Droppings:

Recently I put Baby in a Corner, and it was actually about as anti-climactic as the time I messed with Texas.

My old girlfriend Carly still confuses me….even now, years after we broke up. I understand she was mad about the breakup, and she wrote the song about my being vain. However, given her follow-up song about me was NOBODY DOES IT BETTER, don’t I kind of have a right to be vain? Come on, Carly. It’s time to move on.

Speaking of songs, I was talking to Neil Diamond last week, and he told me that in the original version of Cracklin’ Rosie….the line went, “Cracklin’ Rosie make me a sandwich….�

Which do you think chess playing woodworkers struggle more with…..end grain or end game?

Do Deaf people sign in the shower?

That was it. Notice there were far fewer thoughts today. It’s because the commute is so much faster in the Mercedes than in the VW….

For the record, there was no Night Ranger during this morning’s drive to throw my world into a Tizzy. Rather, the drive was somewhat calm and relaxing, with the exception of one radio visit from Rammstein that made me move the shifter lever from sixth to fourth and plant the right foot hard.

My wife and I have 4 cars, but one of them is my baby. However, like any baby…it requires a lot attention. It's my Mercedes SLK 320 (with AMG Sport Package).

I don't want to discuss performance; otherwise I will get carried away talking about mine being the fastest time of the day at our MBCA (Mercedes Benz Club of America) Autocross event three weeks ago. (Note the trophy plaque in the photo below....braggin in your own blog...how pathetic.)

Instead, I want to finally clear the air about how much work it is to operate the radio while driving with the top down. I live just off of US31. US31 is a 55 mph 4 lane highway, but it has crossroads and stoplights. That means that each time I stop at a light, invariably someone pulls up next to me, causing me to scramble to change the radio to something far more hip than what I was really listening to.

While passing long lines of cars at very high speeds, I can be belting out "Looks Like We Made It" right along with Barry Manilow. However, at the next light I have to quickly punch up a station that is playing something more along the lines of Van Halen's "Hot For Teacher." 5 seconds after the light turns green, with the car back up to 60 mph, I can jump back to Barry for a strong finish to our duet.

This morning, though, something different happened when I switched to Sirius Radio's Classic Rewind while stopped at a red light. I hit the radio preset and found Night Ranger. Immediately an entirely different set of obsessive compulsive activities started. Sister Christian is a trigger song for me. Like the folks who would act out The Rocky Horror Picture Show down in front of the screen on Friday nights back in college…I do a one man production of Boogie Nights every time I hear Night Ranger's Sister Christian. Here is how today's show went.

I immediately went to the glove box, grabbed the firecrackers, started lighting them off, and tossing them in the air.

Next I grabbed my long-hair wig and bathrobe from under the seat and started doing air keyboard, transitioning into air drums, followed by full-blown windmill air guitar each time the song would crescendo toward "MOOOOTTTTTTOOOOORRRRRRIIIIIIINNNNNNGGGGGGG!!!!!!!!!!!!"

I suppose that I should mention that even though my one man show starts with the Sister Christian scene, once the song is over I actually turn the radio off and play out the full film from there. (We've established it's obsessive compulsive behavior, folks…I cannot control it.)

Normally, it goes pretty well, but today was different. Because just as I got ready to roll the credits, having given myself a pep talk in the mirror as I vainly tried to convince myself that I am still a star…I looked up to find my only audience member was an Ottawa County Sheriff.

If anyone in West Michigan knows a good bail bondsman, please have him give me a call. I am currently in the Fillmore Detention Facility under the name of D. Diggler.

Highland Woodworking adds the CarveWright CNC Wood Router to our collection of woodworking tools. The CarveWright Woodworking System is winning awards for product innovation in woodworking, as it brings modern CNC technology and the power of the internet together with traditional woodworking. The CarveWright can be used to perform a variety of functions such as routing, cutting, carving and jointing and while considered a woodworking machine, it is also capable of creating detailed designs in other soft materials like HD foam and suitable plastics.

The CarveWright while compact, just slightly larger than a bench top planer, is a full-on, 3-dimensional CNC milling/carving machine. Use it to make signs, carve decorative reliefs or mill just about anything you can imagine in wood, HD foam and some plastics. The CarveWright can handle work up to 5” thick, 14.5” wide and almost any length. Its onboard computer and project design software makes it simple to use even for the novice. Just insert the memory card into the machine and an LCD screen walks you through the process. You don't need to bring your computer into the shop or even have it connected to the CarveWright. You can manipulate designs in almost anyway you like from their 3D pattern library, or create your own. For PC users the minimum system requirements are Windows 2000 or XP with 128MB RAM, 75MB of hard drive space and graphics card with OpenGL support. Mac users need OS 10.3 or later.

The CarveWright includes a carving bit, a cutting bit, two 1/4” bit adaptors, a bit removal tool, a vacuum bag, memory card w/programmer, design software and instructions.

Highland Woodworking is also pleased to announce an addition to our popular Saturday Mornings at Highland Free Demonstration Educational Series. On Saturday, June 28th, 2008 at 10:00am visit our retail store in Atlanta, Georgia where Ben Arthur will demonstrate the basic use of the CarveWright Machine.

Gun cabinets seem to be a popular project among woodworkers.  Gun owners like to show off their collections.  The problem is, most gun cabinets are nothing more than a cabinet with a glass door.  That make’s it easy for thieves to “smash and grab” the contents.

Nestled in the heart of an Amish community is a small shop that makes high-end gun cabinets. But these aren’t your standard cabinets.  They use an exclusive locking mechanism that makes it very difficult, if not impossible, to steal the guns. 

The cabinets are made using traditional woodworking tools, but with a unique power source.  The Amish don’t use electricity. So there’s a complete cottage industry in the Amish communities that converts power tools to alternative forms of power.

You can get the whole story here.  It’s worth the read.