Lie Nielsen now carries tools to create string inlay* (pictured at right) based on Steve Latta's innovative designs.

I took Steve's inlay class a year ago at Olde Mill Cabinet Shoppe, where we made simpler versions of the tools (pictured below).

While I won't show you how to make the tools since they are Steve's original designs, I will tell you that they are simple to use, if you're thinking about taking Steve's class, buying the L-N set, or making your own. I practiced for only about an hour before starting a Chester County line and berry design for a spice box door. It only took about 3-5 hours to do all of the inlay for this panel, although the "berries" aren't finished yet, nor has the surface been finish-sanded. It's far from perfect, but hopefully people won't inspect it too closely once it's done (which may be never, since it's been sitting in this state of incompletion for almost a year....)

The radius cutter pivots on a point while little teeth plow a groove for the inlay. You can see a close-up of the teeth configuration on the L-N website. In Steve's class, we also made a tool that plows a straight line and a thicknessing gauge that ensures the veneer strips are consistent in width. To use the gauge, you pull the veneer strip through a kerf in a block of wood. One side of the kerf is wood. The other side has a little scraper attached to it.

L-N also offers a dvd featuring Steve Latta creating the line and berry technique. I have not seen this video, but I can vouch for Steve's excellent teaching skills.

It's easier than you might think to add decorative string inlay to your projects.

*I do not sell for Lie-Nielsen (or Steve Latta), nor have I used their inlay tools, so I cannot comment on their performance.

July 18, 2008 Atlanta, GA. Highland Woodworking is pleased to announce the addition of The Fretboard Journal to their collection of woodworking books, magazines and DVDs. An important journal for luthiers and instrument enthusiasts, the quarterly publication is archival quality and chronicles the most innovative fretted instruments and instrument makers of the last 150 years. Fretboard's writers, historians and photographers from around the world provide well researched and insightful stories highlighting the best players and the most interesting tales in music.

The Summer 2008 Fretboard Journal features David Grisman's Chris Thile interview, details about veteran luthier Rick Turner's Compass Rose acoustic guitar and examines the tradition behind Kamaka ukuleles. The Fretboard Journal published by Jason Verlinde is a magazine for musical instrument makers, players, collectors.

Highland Woodworking, Atlanta, GA USA is a purveyor of fine woodworking tools and supplies with a 30 year reputation for quality tools and service. It is the exclusive source of the Wood Slicer Resawing Bandsaw blade, voted by Fine Woodworking Magazine as the best resaw blade available. Highland Woodworking is a trusted source of woodworking education and information. A schedule of woodworking classes and detailed product information is available at highlandwoodworking.com. Highland Woodworking 1045 N. Highland Ave., Atlanta, GA 800-241-6748.

The Festool Kapex KS 120 Miter Saw has shipped in North America and is now in stock at Highland Woodworking. The culmination of years of testing and engineering, the Kapex KS 120 was developed with one goal in mind: to be the best sliding compound miter saw ever manufactured. The Kapex KS 120 is the first miter saw with variable speed, enabling the user to match the speed of the blade with the requirements of the material for perfect cuts, every time. Finally, a sliding compound miter saw that combines a large cutting capacity with a compact lightweight design. The Kapex delivers 12" miter saw capacity in a revolutionary 10" miter saw design.

Festool, founded in 1925 by Albert Fezer and Gottlieb Stoll in southern Germany, has constantly set new benchmarks for innovative tool design and development, and the Kapex KS 120 Sliding Compound Miter Saw does so again. The innovative twin-column forward rail design gives the Kapex saw greater precision in an extremely small footprint. And Festool's meticulous engineers designed the saw to capture 91% of the saw dust when used with a CT dust extractor when using a 36mm hose.

SPECIFICATIONS

• Power Consumption: 1600 Watts
• Speed: 1,400-3,400 RPM
• Cutting Depth 90°/90°: 12" x 3-1/2"
• Special Cutting Depth: 4-23/32" x 3/4"
• Crown Nested Capacity: 6-5/8"
• Max Bevel: 47°/47°
• Miter Range: 50°/60°
• Dimensions: 28" x 19-3/4" x 18-1/2"
• Weight: 47 Lbs

Highland Woodworking is located in Atlanta, Georgia USA. Call 800-241-6748 for sales or visit www.highlandwoodworking.com for more information.

Here's the first episode of several to come on our time at the Woodworking Show in Atlanta, GA. In this episode we give you a taste of what it's like to attend one of these events. You'll see booth after booth of vendors showing their products to thousands of interested woodworkers, seminars that teach skills, and deals being made on every corner.

We also picked a few vendors that had some really cool tools to show case in our videos. In this first video, we bring you Alex from Carter Products, makers of innovative products for your bandsaw.

While we were at the Atlanta Woodworking Show we were able to talk a few of the vendors into giving our subscribers some great deals on their products. So if you're a subscriber, be on the look out for more information. If you're not a subscriber, it's not too late. Simply head on over to our website and sign-up!

www.WoodworkersResource.com

Here's another video from our trip to The Woodworking Show in Atlanta, GA. In this video we get a look at a very innovative tool to sharpen your your woodworking tools, the Jool Tool.

My good friend Rob interviews the CEO of Jool Tool, Anie Piliguian, about how this sharpening system works.

We were sure impressed with the speed and ease that the Jool Tool can put a razor sharp edge on cutting tools.

If you have any questions about the Jool Tool or anything related to woodworking, visit our site at:

www.WoodworkersResource.com

Craig Stevens

This fall, our magazine is sponsoring the first-ever weekend conference devoted to hand tools and learning to use them.

We're calling it the Woodworking in America conference, and we'll be bringing together the country's best hand-tool woodworkers and manufacturers for a symposium in Berea, Ky., on Nov. 14-16.

There will be more than 40 short classes on tools and techniques during the long weekend, plus a marketplace where toolmakers can display (and sell) their wares, social events with the demonstrators and toolmakers and more.

So who is going to be there? Here's the list of people who have agreed to teach seminars during Woodworking in America as of this date (with more to come):

Roy Underhill: Known as "St. Roy" to the legion of fans who watch "The Woodwright's Shop" on PBS, Roy worked at Colonial Williamsburg and then launched his show about traditional hand tools.

Frank Klausz: One of the country's consummate craftsmen, Frank is a professional New Jersey cabinetmaker who trained in Hungary and has a lifetime of experience with the full range of handwork.

Michael Dunbar: Founder of The Windsor Institute, Michael has single handedly revived the craft of building Windsor chairs, has trained thousands of woodworkers and is a passionate student of the art and history of handcraft.

Adam Cherubini: The author of Popular Woodworking's popular "Arts & Mysteries" column, Adam is a devoted 18th-century woodworker who builds period pieces using period tools.

James Blauvelt: A Connecticut cabinetmaker, joiner and carpenter, James owns Bluefield Joiners and is a student and teacher of Japanese tools and traditions.

Robin Lee: The president of Lee Valley Tools in Ottawa, Ontario, Robin has been a driving force behind the expansion of the Veritas line of premium handplanes and a caretaker of the company's immense tool collection.

Thomas Lie-Nielsen: The founder of Lie-Nielsen Toolworks in Warren, Me., Thomas has been making and selling premium traditional hand tools for 27 years. Thomas's company was the trailblazer in reviving many traditional forms of tools that had been lost.

Larry Williams and Don McConnell: Two of the principals behind Clark & Williams in Eureka Springs, Ark., Larry and Don are bottomless wells of information about traditional tools and their workings. Both are accomplished woodworkers, planemakers and tool historians.

John Economaki: The founder of Bridge City Tool Works in Portland, Ore., John has long been a pioneer in developing new (and very beautiful) forms of hand tools for woodworkers.

Konrad Sauer: The owner of Sauer & Steiner Toolworks in Ontario, Konrad is one of the leading makers of custom infill handplanes.

Wayne Anderson:Wayne specializes in designing and building custom infill handplanes that are deeply rooted in the past but are each a completely original work of art.

Ron Hock: One of the earliest and most important players in the revival of handtools, Ron makes high-quality replacement plane irons, chipbreakers and marking knives in Ft. Bragg, Calif.

Mike Wenzloff: The founder of Wenzloff & Sons sawmakers in Forest Grove, Ore., Mike is a long-time woodworker and expert in saws and saw sharpening. His premium saw business has exploded in the last two years.

Joel Moskowitz: The founder of Tools for Working Wood and an expert on woodworking history, Joel has recently been making many traditional hand tools, as well as selling them through his catalog and web site.

Clarence Blanchard: The publisher of "The Fine Tool Journal" and the president of Brown Auction Services, Clarence sees more old tools in a week than most of us see in a lifetime.

Kevin Drake: After studying under James Krenov at the College of the Redwoods, Kevin founded Glen-Drake Toolworks, where he combines woodworking, toolmaking and education. His innovative tools have received numerous awards; we named his Tite-Mark one of the "Best 12 Tools Ever." 

If you are interested in attending, please visit the web site that is dedicated to this conference at WoodworkinginAmerica.com and sign up for the conference's newsletter (the sign-up box is on the top right of the page). You'll then be the first to be notified of when registration will open (it will be before July 1) and the pricing for this event.

Attendance will be limited to a few hundred people (we want to keep the event intimate and manageable), so be sure to register as soon as slots become available. We are expecting the conference to sell out.

There are more announcements and surprises ahead that I cannot share with you right now, so please stay tuned to the blog and the conference's newsletter.

— Christopher Schwarz