Test2
Home / inspire



Sponsor

TagCloud






Add to Google




This feed-reading application is created using free online FEEDS (RSS and ATOM files) aggregated using Google Reader API
If you find there is any copyright abuse, contact us as soon as possible, thanks.




Designing a Wright Table

06/23/2008, 15:07 | Lost Art Press Blog

As a kid, probably the first furniture style that I ever became aware of was the Prairie style, the strongly rectilinear forms that most people associate with Frank Lloyd Wright.

My dad had lots of books about architecture lying around the house that he used to help him design the two houses for our farm outside Hackett, Ark. I used these books to help me design model houses that I built using Legos and wooden blocks.

Lucky for me, Prairie-style houses and furniture are easily built with rectilinear Legos. And Wright's system of proportioning favored 2:1 ratios ? that's the ratio my wooden block set used.

The last piece of the puzzle was the cape that my mom made for me when I was 5 so I could be Superman at Halloween. After seeing photos of Wright wearing a cape, I also took to wearing my cape when I'd build houses and furniture in my room.

I know what you are thinking: It's amazing that I ever married.

In any case, I've always been drawn to Wright's aesthetic. I've visited houses of his in many cities, I've been through his furniture and papers at the Prairie Archive at the Milwaukee Art Museum, and one of the highlights of my young life was sitting in one of his original barrel chairs.

So I'm quite excited to get started on a new project for an upcoming issue of Woodworking Magazine ? an end table designed in the style of Frank Lloyd Wright. I didn't want to slavishly copy one of his designs, and so I'm hoping to build a piece that is inspired by a table at the Dana House (one of my favorite tours), and uses geometric forms found at the May House in Grand Rapids, Mich.

I've drawn a bunch of sketches, but I decided that this piece really calls out for a full-size prototype in wood. Luckily, we have some thick ash lying around the shop that's left over from a co-worker's bench-building project, so there was only a little bit of machine work required to get the parts in shape.

My favorite tool for building prototypes is my Kreg pocket-hole jig. This sucker allows me to assemble and disassemble projects quickly. I screw them together, shake my head at the stupid design choices I've made, unscrew the parts, trim them down and then start the process over.

This weekend I got the basic form real close after about three hours of work. My top started out entirely too thick. It was 2" thick and now it's more like 1-5/8". Now I just need to fuss around with the inside guts to get the geometrical designs inside looking good. My No. 1 concern is where I place the large suspended square. Because end tables are typically viewed from a standing position, I need to get it close to the floor.

I'm also a bit worried that things will look too busy inside the table if I put two of these squares in the base. Perhaps I need to go home tonight, put on my old cape (yup, I still got it) and page through some more picture books on Wright.

? Christopher Schwarz

??????????/ 'merchandising' crafts for exhibition

05/01/2008, 11:53 | Masashi's woodworking diary

????????????????????????????????????
????????????????????

???????????????????????
2008?5?1-6?
10-17?
??????
???????2-1
tel 0742-26-3476

Our annual exhibition is taking place in Nara from 1st to 6th May.

Craft and Furniture Exhibition of Gifu Academy of Forest Science and Culture
1-6 May, 2oo8
10:00-17:00
Nara-machi Monogatari Kan
2-1 Nakashin-ya Machi, Nara, Japan


????????????????????????????????????
?????????????????????????????????????????????
???????????????????????????????????
???????????????????????

Last week the second year students finished their works for the exhibition and presented them in front of the teachers.
They are requested to make their original products according to what they learned during their first year.
They need to produce them in a batch within a limited shedule, calculate the cost and assess their productivity.
This 'merchandising' lesson is a part of our curriculum.

????????????????????????????????????????????????????????????????????????????????????
??????????????????????
???????????????????????????????
The venue, Nara-machi Monogatari Kan is in the city centre of the old capital Nara. Hundreds of people come and see our exhibition every day. Students show their works to the public for the first time and receive many comments from them.
Please come and see our exhibition. Students are waiting for your compliments!

????????????????
Unique oval floor lamps by Ken-ichi Matsuoka



?????????????????
Plates by Hajime Hoshino. Designed for his grand child.



??????????????????????????????????????
Stools by Atsushi Yokoi. He was commissioned them from an adult education centre in Gifu.



???????????????????????
Stools for backache patients by Yosuke Ueda. Easy to stand up with handles.



???????????????????
Hand mirrors by Keiichi Fukushima. Inspired by details of architecture in Hida.



????????????????????
Hairpins by Mako Taniyama. An image of cherry blossom falling.



?????????????????
Parquetry butter knives by Hiroshi Okabe.

Interior Design, an Ethnic Approach

04/28/2008, 04:41 | Wood Shutters
Designing your rooms around an ethnic theme can be exciting and fun and allows you to bring elements of other cultures and distant lands into your home. You can be more daring in your approach to colour and with such a wide variety of textures and patterns available, this can collectively add a whole new dimension to your interior design project. Unusual artifacts from different cultures can work very well as focal points in a room and as there are no hard and fast rules to stick to and because there are so many variations, you can go beyond the usual or traditional to portray a style that is not only beautiful, it is unique.

So what do we mean by ethnic?

Ethnic basically means native or indigenous people from a particular area so in relation to Interior Design it means to bring the natural elements that are representative of whatever culture, land or peoples you choose to portray into your own home to define your space.

Naturally the world is your oyster as they say so there are countless cultures to choose from, all you have to do is bring a particular ensemble of colours, patterns, materials and artifacts together to create a "look" that is recognisable and distinctive. What about a Mediterranean flavour, Native American Indian symbolism, or perhaps Tibetan Buddhism? Popular themes include African, Mexican, and Asian but you can go with whatever inspires or appeals to you. Here are a few ideas to get you started.

African Theme

Think of Africa and all that it conjures up in your mind, the landscape, the sounds, the smells, the colours, the mood, and then if you try to pick out the key points, what would they be? Colour schemes might include earthy colours like green, beige, browns and tans, set off with orange and splashes of red. Think about floor and wall coverings, natural substances would probably work best. Finishing touches can include wall hangings, African artifacts, drums, rugs, African fabrics and prints, animals made of stone, clay or wood, ceremonial masks hung on the wall, brightly coloured African bowls and pots, and so on.

Mexican Theme

What does Mexico mean to you? Perhaps desert colours with sandy tones, beige and khaki, along with reddish, rustic colours and hues. Blankets and woven fabrics in bright colours, perhaps terra cotta pots and bowls, pine wood is popular for furniture. Artifacts can include symbols of the South West or from the Spanish influence, or from the Aztecs, Mayans and other ancient civilisations, all of which can add an interesting and authentic Mexican look and feel.

Asian Theme

There are many variations within an Asian theme but two quite popular ones are Japanese and Chinese. Japanese themes tend to lean towards a more minimalist look and have a tranquil and peaceful feel. Consider a futon and using screens to get that Japanese ambiance. Colours tend to be natural and objects from nature often feature as focal points, for example, smooth stones and pebbles, water fountains and bonsai trees. Chinese themes on the other hand might involve brighter and bolder colours, lanterns, dragons and other mythological creatures, artwork depicting the traditional people colours and landscapes and Chinese handwriting.

How to get started

Once you have established which particular ethnic culture appeals to you, browse through books and magazines and the Internet to get ideas that will spark off your own imaginative flair. Identify what elements go together to make up that particular look or feel that you want to create.

Consider the walls, ceilings and floors carefully as this will provide a base for you to work from and then you can add in the details to finish it off. For example, is the texture and appearance of the walls and ceilings rough or smooth? What floor covering is appropriate, should it be wood, stone, tiles or carpets? Will rugs and mats make a difference and if so what are they made of? Are the windows better suited to drapes, blinds or shutters? What style of furniture works? What about plants, motifs, pictures and wall hangings?

The theme you adopt and the way that you choose to portray specific elements of that theme is entirely up to you and your imagination, the end result will be your own unique interpretation of a culture or a place and you will have added a touch of the exotic to your home.

David McEvoy is an expert in interior design. If you are looking for a leather sofa to give the finishing touches to a newly decorated room then please come and visit our site http://www.leathersofa.uk.com/

When life gets in the way

03/02/2008, 22:42 | Musings From My Shop

The thing about being a hobbyist woodworker is that shop time is not automatic. Sometimes kids, work, kids, other projects, etc demand attention. Did I mention kids? (The empty-nesters among you can stop snickering now.) That?s just the way it goes.

Progress on the Shaker desk for my mother-in-law is slow. My wife is on a business trip to Japan so I?m looking after the kids. I have another project going on that is consuming most of my free time (watch this space for updates on this -- it?s exciting). And at work, it?s just about time for final exams.

However, there is an upside to being a hobbyist woodworker. No client has ever called demanding to know why I?m behind schedule. If I don?t feel inspired I don?t have to go into the shop. And I?ve never had to wonder where the next job is going to come from. I sometimes comfort myself with those thoughts when I wish I could just chuck it all and hang out a sign. And soon life will calm down and I?ll be back in the shop working on that desk.

Dying Arts and Mysteries? I don't think so.

12/11/2007, 12:28 | Arts & Mysteries with Adam Cherubini - Blog

Writing for PW is really cool. People I tell about it often ask whether I feel great about seeing my name in print or the validation of being published. I don't mean to sound ungrateful but the answer is no.

I enjoy the challenge of researching articles and trying to bring something fresh to woodworkers. I enjoy the job of writing.

But there is one incidental benefit that I really like. I like meeting with woodworkers, getting emails about what you are doing, where your interests lie, and trying to help answer your questions. This has allowed me to be privy to the greater trends and market forces. Because this incidental benefit is inevitably paid for by you Arts and Mysteries readers, I felt it was my responsibility to share with you what I've learned:



I exhibited my wares at a craftshow recently. During a slow period, a few other crafters visited my booth to chat. Each bemoaned the demise of craft in America.

While I was sympathetic, I felt it was also my responsibility to share with them my perspective. I'm seeing a great resurgence in traditional craft. More and more woodworkers are using traditional tools, liking them, and becoming more interested in traditional techniques, traditional joinery, and even traditionally styled furniture. Never before has there been so much information available, or such high quality tools. 10 years ago, you'd have been hard pressed to find a good western dovetail saw. I count 3 or 4 extraordinary saws on the market today.

Woodworking is a solitary activity. Most of us work alone. But I have a different perspective. What I want you to know is:

1) You are not alone. You are part of a large movement of woodworkers exploring traditional techniques and discovering the lost arts and mysteries.

2) You have brought this about- by the choices you've made in books and magazines, tools and even the projects you've taken on. You are shaping woodworking's future, and in my opinion, for the better.

And there's something I would like you to do for me: I would like you to start seeing yourselves as part of a community. Don't quibble with each other on the internet. Help each other. Also, recognize that the work you are doing is important. Take it seriously and share it with others. Share what you've learned and you'll inspire others with your efforts.

I think in 20 years time, we're going to see a return to craftsmanship the likes of which we have never seen before. I don't believe the attitudes required, attention to detail, a certain process orientation, a pride in manual labor, are going to stop with woodworking. A new day is dawning. You are not only part of that. You are responsible for it. Enjoy it.

? Adam Cherubini >

History Of Traditional Kudus House

06/26/2007, 11:15 | Antique Knockdown Carved Wood House

Kudus is a city in the Central Java, Indonesia, located among Jepara, Demak, Pati, and Purwodadi districts and in the route of Semarang the capital city of Central Java to Surabaya (please see location map). Based on story, Kudus name was from Al-Quds, which mean holy.

The history of Kudus cannot be separate from the name of Sunan Kudus as the founder and one of the Wali sanga (nine Wali) spreader of Islam in Java at that moment. As his inheritance, Kudus has a famous artefact called Menara of Kudus which form like a temple, placed in one complex with mosque of Menara Kudus that build by Sunan Kudus around 1685 M.

Except famous as a Wali city, since in Kudus area there is wellknown also Sunan Muria, Kudus also known for a long time as a kretek city (city of clove cigarette) as there are many entrepreneurs in the cigarette field. Beside that, Kudus can also called as city of industry because of the long development of industry in the area such as industries in cigarettes, papers, printings, handycrafts, embroideries, foods, etc.

Kali Gelis (Gelis river) which lying in the midlle of the city separates Kudus into two areas, one is Kudus Kulon (west Kudus), the other is Kudus Wetan (east Kudus). Long time ago, according to history, citizen of Kudus Kulon area were entrepreneurs, traders, farmers and moslem theologians, while occupant of the Kudus Wetan area were government officers, intellectuals, teachers, nobles and noble relatives.

Within the growth and development of Kudus, physically Kudus Kulon area, where the majority of the citizens were entrepreneurs and traders, were a steph forward in wealthy compare with the other area Kudus Wetan. With their financial increasing, they build the traditional wooden houses of Kudus full with carved that make it different with the previous traditional houses. That is why, the amazing traditional house, which lately called as the traditional house of Kudus used to only placed in the Kudus Kulon area. At the beginning, the traditional house of Kudus only belong to the Islamic Chinese traders, but furthermore were copied and developed by the native wealthy traders.

The traditional house of Kudus that mostly build before year 1810 M, ever reach the glorious time and become a symbol of prosperity for the owners. The Kudus Kulon area environment was formed with the particular existency of the traditional house of Kudus.

The developing history of Kudus has many influences from foreign cultures like Hindu, Chinese, Persia (Islam) and Europe, which also influence the architectural field in made the traditional house in Kudus. From the research, it can be concluded that there are several motifs colouring the carving style of the traditional house. One is Chinese motif, which form as the dragon carved, Persia or Islam motif that form as jasmine flowers or the particular motif of Kudus that form as lotus flower and colonial motif that form as ropes, crown, and animals. All motifs have correlation with the incoming cultures to Kudus.

The carving art of Kudus dominate by lotus flower as the meaning of Hindu religion. Sunan Kudus introduced a carving dominated by jasmine flowers that described united one to another. The meaning of jasmine was to describe that Islam religion at that time was a small community but it like jasmine, even small, could give fragrance to the sorrounding area. Jasmine made united in one to another to describe that everybody in neighborhood were live in peace even there were differences in the religion.

Within development in making the traditional house of Kudus, influence of the elements of cultures were very viscous gave the meaning of form and function of every part, hence could be separate as follows:

1. Traditional house as the tools to spread religion (dakwah) *)

In the daily life, Kudus citizen are majority obedient muslem. Life of religious service is the social relations that have formed in the many aspects, such as in the house to live which full with the describing of the rukun Islam (Islamic obligation).

In the room inside, there is a place or room called gedongan which formed as mihrab, a place where imam (leader of praying) lead the pray that connected with the symbolic meaning as a holy place and sacral. Gedongan also has significance meaning used as the place of heirloom treasury and the wealth of the owners. Gedongan used also as the main honorables bedroom and at the particular time used as special bedroom for the wedding couple of the childrens of the owners.

Also in the room inside there are four main pillars, which called saka guru that desribe four essence of ideal life. At the top of the fourth pillars, putted tumpang sari where the roof was lying on. The sum of tumpang sari are always odd and always have a meaning, sum of five describe the amount of praying five times a day. The sum of three describe life in soul world, transitory (this world) and the world hereafter.

Front room that called Jaga Satru is provided for parish and separates into two part, left side for women jamaah (followers of imam) and right side for men jamaah (followers). Still in the Jaga Satru room at the incoming front door, there is one wood pillar in the midlle of the room which called balance pillar or soko geder, which has meaning except as the symbol of ownership of the house, it also has a symbol for reminding the resident about the One God, the only One who have to be homaged.

House as the tools to spread religion is represent through Islamic value that formed in the carved style at the partition between front room and inside room called gebyok. The strengthen element of gebyok are two stalk pillars where at its top made a carved that formed as palm of the hand of muslem when doing praying at the position of takbiratulihram (when start to pray) that always at the same time say the words Allahu Akbar which mean Allah The Mighty.

Carving in the gebyok, even it is accumulation from many culture influences, but the visualitation adopted from Arabic calligraphy with Al Quran and Hadist theme. There are many other dakwah messages that formed in the building decoration and it always about aspects of way of life and life attitude of human in do their obligation in the earth for their salvage in heaven.

2. Traditional house as a masterpiece art*)

Traditional house of Kudus if notice deeply is more and more fabulous since its uniqueness and attractiveness in exterior and interior which full with ornamen that made by highest skill woodcarving artist. Foundation of the existancy of the traditional house of Kudus was full with taste and creation that fashioned in the beautiful forms without broken any religion values. Through the activity of art, there is possibility of adding the atmosphere of the deepest metaphysic reality.

Traditional house of Kudus, if seen from Bernard Rudofsky theory, is include in the communal architect that priorities in the art element which done continuosly and spontaneously balanced by whole community with the same tradition from time to time following the ritual habit inside the communal. Art is not just copy and physical implementation of the external form, it also as the spiritual elements that achieve esthetic form. The creation becomes what it called architectural without architect.

The construction of the wooden house made completely knock down that make it easir to release and assemble hence there is possibility also to make part by part of the ornamen fully detail and accurate. The decoration was inspired by the success of temple relief and the development process was instructed by Chinese woodcarver from Sun Ging area. The owners were the wealthy entrepreneurs and traders. The carved decoration were build on the whole component intentionally without gave any empty space left and the results was very optimum, full of meaning, symbolic and the style were correlation among Java, Gujarat, Persia, China and colonial (Europe) style.

Wali Songo influence in the formed of decoration was very dominant even in Islam religion there is a forbidden in the formed of living thing, but they gave the chance of a huge tolerate formed as acculturation and assimilation on the evolutif way thus create a wonderful figurative consequence of imagination from the living thing forms. Art appreciation from the Wali Songo that full with tolerate also accomplished by khalifah in the Arab since Abbasiyah era. Palace of Harun Al Rasyid in Baghdad, palace of Al Mutasin in Samara, Cordoba mosque in Spain, also decorated by fresco formed lion, eagle, horses, and the other creatures. Drawing arts applicated in carpets, ceramics, wall and doors achieved the highest level to become the world admire.

Art ornamentation looks unite with the main building, since the creators were very concern with details, function, structure, ritual, symbol and esthetic that decoratively increase the attractiveness for whoever want to see it. The particular local habitual in the way of life through the architectural behaviour is the description of personification of the Kudus traditional house that make it different in form and style with the other joglo building in Java commonly, except in the form of the roof and soko guru as the support of the tumpang sari.

3. Traditional house as the Class symbol *)

The beautiful traditional houses of Kudus have average age for more than 100 (hundred) through 200 (two hundred). Due to the age of the building, if someone wants to analyze it, they have to use the examination within that era.

According to Prof. Berger, the structure of the Java community at the 19th and 20th century can be divided into several class such as; nobles, government officers, traders and farmers. Colonial politics at that time placed politic emancipation that have aim to liberate individual from old social band which consider shackles the freedom and law enforcement that hold mostly in the feodalism band. Development of individual in the community was appointed to the forming of personality, spirit effort in order to developing the prosperity soon.

In the other words, Kudus citizen that categories as pesisiran (near the beaches) citizen, their wealthy level mostly higher compare with the nobles and the officers at that moment. But in the daily life they did not get any self-respect and honor by the community. They way of living as a trader was qualified as second class and dishonor, hence as the compensation citizen of Kudus Kulon, that the majority were traders, formed the appearance of their house very glorious with the expectation that their too have the rights to get honor same with the nobles. The level of their house made in high five stairs to suit with the social strata like what it done by noble community. Guess from the farmers were accepted in the front room, for the officers community accept in the midlle room while for Bupati (distric chief) and Netherlands people were accepted in gedongan room. Surrounding the house was made high wall same as the form of palace.

Traditional houses that at the beginning owned by traders of Chinese moslem were copied and developed with the Javanese and Islamic values. All over the house were full of carved with ornament from many styles like in the palace of kings in Java, done by high skilled woodcarvers with very fascinating result. Accordingly, it worth to gets the confession of honor like government officers and nobles. For them, house were a symbol of status or stage that worth to get honor and equality.

(Source :* J Pamudji Suptandar, Great Lecture of Rupa art and Design Faculty of Trisakti University/Adopted in English by Deva's father)

The fascinating wooden carved at the traditional house of Kudus must be come from the very skilled woodcarvers. Then, from where the woodcarvers came from?

The carving style of the wooden traditional house of Kudus was quite distinct from the other famous carving centre in Java, Jepara. Historically, Kudus was a carving centre long before it developed as a skill in Jepara. Carving was introduced to Kudus when an emigrant from the famous carving city of Yunan - China, The Ling Sing, arrived in the 15th century. He came to Kudus not only to spread Islamic teachings but also to devote his skills to the art of woodcarving, and his style, Sung Ging, was famous for its smooth and wonderful woodcarving masterpieces.

The Ling Sing was wellknown as mubaligh (spreader of Islam) called Kiai telingsing. The name of Kiai Telingsing until now use as a name of a street in Kudus city. There is a kampong or village surrounding the street called Sunggingan that predicted came from the Sun Ging name. The area, at the past, was belief as the resident of the woodcarvers and carpenters from the devotion of Kiai Telingsing skills.

From the 16th to the 18th century, woodcarvers in Kudus received many orders to construct wooden houses. The main material - highest quality teak - was supplied from Blora's, Tuban's and Bojonegoro's forest. From the 19th century, however, high quality teak became scarcer and scarcer and this, in turn, discouraged the woodcarvers of Kudus to develop their skills.

The carving skills also belong to Jepara's people and has been very famous until now. There is an opinion, which said that wooden carved art in Kudus also done by woodcarvers from Jepara, eventhough in the reality it different in the carving models, especially in the mission and filosophy.

According the history, Mantingan mosque in Jepara has wall that made from carved white stone with the flower motifs that was masterwork of a Chinese called Tji Wie Gwan who brought by Raden toyib to Jepara after come back from his Islamic study in Campa for five years. Raden Toyib then married with Ratu (queen) Kalinyamat, the very famous Jepara's queen at that time.

For his achievement in build Mantingan mosque at the year of 1559, Queen Kalinyamat and her husband gave a new name for Tji Wie Gwan to become Sungging Badar Duwung, Sungging means carving expert, Badar same with stone and Duwung means tatah (tool for carv).

This Sungging Badar Duwung who then recognized as the root source of the Jepara's carving art which consecutively knowing in all over Indonesia and the world. According to history, he was too takes a part in the erection of mosque in Loram (a name of area in Kudus) and mosque of Menara Kudus.

Sungging Badar Duwung then devoted his skill to the surrounding community in Jepara as well as in Kudus and presented high skilled carvers that from time to time growth in numbers. This skill direct and indirect was useful in the process of developing the traditional house of Kudus.

The certainty of mentioned things were still need to be investigated furthermore. But for sure, the traditional house of Kudus has build and become one of the Kudus markers with its fabulous woodcarving.

The Carver's Mallet Part 2

00/00/0000, 00:00 | Wood Destruction by a Woodscrub




The Carver's Mallet Part 1

In Part 1 I talked about making the handle from curly maple and fastening it to 3 layers of cross grain laminated wood.

Now I'm adding the rest of the laminated layers to the mallet and turning the assembly on the router.

As mentioned before, the head of the mallet is made from laminated 1/4" wood, oak and padauk. I had enough scrap 1/4" wood to make it a total of 14 layers. 10 oak and 4 padauk. The bottom three layers attached to the handle and then I stacked the rest on that, gluing up 3 at a time because even that many gets squirrelly when clamping the freshly glued wood together.

The photo above is the final clamping of the entire assembly. Those Harbor Freight bar clamps fit perfectly into the 3/4" holes in my clamping table.

I quickly made a jig from particle board to hold the mallet at an angle over my router. This idea came from an article in one of the wood magazines (I forget which one). The idea is to be able to rotate the mallet over the router bit to give it a smooth face at the correct angle. I wasn't confident enough in my turning skills to use the lathe on end grain oak, so I wanted to use the router.

It was a mistake.

Several times the router grabbed the piece out of my hands, chewed it up, and spit it back at me. I'm glad I was wearing goggles!

I finally gave up on the router and put it on the lathe. I gave my turning chisels a fresh hone, held my breath and started cutting.

Not bad! Not bad at all! Some tearout on the oak end grain, but overall a good turn. I'm very comfortable with the end result. Too bad I had done so much damage to the head already with the router. Otherwise I'd be able to say it was perfect. As it its, the mallet is just ok. There is no finish on the mallet. Just 2 coats of Butcher's wax. The photos were taken before the wax was applied. That shine is from good cuts alone!

Not really. It's from sanding down to 2000 grit. =D

This is a small mallet. I am planning to take what I've learned and turn a larger one with maple for the head.

The photos here show the damage, the turning on the lathe, and the final finish photos.

I hope this helps inspire you to try your hand at crafting your own mallets! It's satisfying picking up a tool that I've made myself!

Digital Download of Issue 9 Now Available

00/00/0000, 00:00 | Woodworking blog Woodworking Magazine

You can now download an enhanced pdf of the March 2008 issue of Woodworking Magazine (Issue 9) for $6.

Our instant digital downloads are compatible with any computer running Adobe Reader 7.0, a free program available from Adobe that runs on Macintosh, PC and other systems. The downloads are delivered to you on a secure and fast server (a high-speed Internet connection is highly recommended). Plus, if for some technical reason your download is interrupted (power outage due to nefarious squirrel activity etc.), it’s quite simple to get back on and download the issue again.

Issue 9 focuses on the act of handsawing, and it explores the three backsaws you need for hand-cut joints – the dovetail saw, carcase saw and tenon saw. Plus we explain the nearly-lost English system of cutting joints by hand.

We also delve into cutting circles with a simple (and very cool) jig, plus how to properly use glaze when finishing. All these skills will help you build the Stickley Tabouret featured on the cover.

On an administrative note, we’re still working on how to deliver subscriptions digitally to subscribers and have narrowed it to a couple options. More news on that to come this summer. Until then, these enhanced pdfs will (we hope) keep you informed and inspired.

For more details on the digital downloading process and to place an order, click here. You can view all our digital downloadable products here.

— Christopher Schwarz

Mollino, Wendell Castle and the Rough Cut Forum

00/00/0000, 00:00 | Furnitology Productions
So the motto over at the “Rough Cut Forum” is “less type-type, more chop-chop” and that’s meaningful to me. I’ve cleared some time, because I’ve been “chop-chop’in”.

When you are a builder, in our case in wood, each endeavor, demands laser beam focus. A bit of self evaluation has me noticing that I post more when my work is completed and I’m transitioning, a very good trait for a building woodworker. I get notes from the guys over in T-Mac’s Forum telling me to get “chop, chop’in” on Carlo.

Well yesterday, I put Carlo back in focus, along with a Wendell Castle inspired piece. The 2 pieces are in good phase right now, gluing-up on one and sculpting on the other is a nice mix. We’ll see alot of Carlo and peak-in on the Castle piece.

I’ve also taken on the nighttime challenge of being a part in the first that I know of, Furniture: Internet Classroom Blog Build.

Tommy MacDonald (AKA: Chizz, T-Chisel, T-Mac, Big-T) of Rough Cut Fame, with Al and a North Bennett Street School student, Eli Cleveland, have produced an internet woodworking podcast curriculum taking those interested through the building elements of the Federal Period. Yesterday we got our first look at the project, the forum, gives T-Mac a good chiseling and calls it the Crazy Leg table, but I see it as a great marketing tool. Which leg do you prefer?? Would you like satin wood or lace wood in the drawer front??? The bellflowers are an expensive option; would you like to include those????

T-Mac’s design has those building and those watching; making 4 different style legs’ of the Period, bellflower inlay, sand shading edges, making inlay banding, cockbeading and a top decorated with all kinds of inlay elements of the Federal Period. T-Mac’s thinking is that once the forum is exposed to the Federal Period, a Pembroke table, Demilune table and such, could be the next project. The project presentation will be geared towards evening shop time.

For those of you unaware, the Rough Cut forum is what I term, a “building or working forum”, not many posts show after 8am or before 6pm. That may change as the build gets underway. What I like about the forum is nobody tries to dominate knowing everybody on the forum is very knowledgeable and each woodworker has something to offer. After all the tag line is….. “a podcast for the serious woodworker”.

If you are interested in period furniture, or like me believe there is nothing wrong with “Mona Lisa’s Mustache” after all; I have done a Chippendale top in mica and metal and see value in mixing periods, jump into the Rough Cut Forum build or just watch the podcasts. There’s positive energy to feel and it should be interesting to be a part.

As for our blog…….. expect a lot of Carlo, peaks at my Castle inspired piece, an ICFF interview, and a visit into the shop of David Ebner who is presenting at this years Furniture Society Conference. That video is shot, I’m scheduled to shoot another Furniture Society player April 10th.


“less type-type……more chop-chop”………Neil



GO TO: Rough Cut Forum

My Design Process inspired by: a Wendell Castle Build

00/00/0000, 00:00 | Furnitology Productions

This is my entry into the Fine Woodworking Maple Build-off Challenge. Come along for a trip down my design process on this multi-functional piece of furniture.

Gigi calls it: "Morning Coffee and a Crossword" the piece is her crossword puzzle work station. Is the unit a lighting fixture? an end table? a magazine rack?, it's all three.

Learn more of Wendell Castle and investigate the genius of Achille Castiglioni.

And let me know what you think of this Wendell Castle inspired, functional sculpture.

ENJOY!!!!!!

Here's the Popular Woodworking Blog post seeking your work.

Formats available: Quicktime (.mov)

Winner of our Quote of the Year Contest

00/00/0000, 00:00 | Woodworking blog Woodworking Magazine

Todd Austman of Calgary, Alberta, won the miter plane from Philly Planes in our "Quote of the Year" contest for this little jewel:

"I am always doing what I cannot do yet, in order to learn how to do it."
— Vincent Van Gogh

We had hundreds of entries, which we narrowed down to about 75 of the best quotes that we plan to use in the coming year. (When we use your quote, we'll notify you and send you our latest hardbound book. It might take a bit of time for your quote to come up, so please be patient.)

There were a couple other quotes that came very close to snatching the top honors. Here are a few of them for your enjoyment:

"Good judgment comes from experience. Experience comes from bad judgment."  
— an aviation saying often attributed to Will Rogers

"The more complex the mind, the greater the need for simplicity of play."
— James T. Kirk

"Ya it’s short — but only on one end."
— Anon


Thanks to all of you who entered the contest. Your contributions, suggestions and scoldings are what make it a better magazine and inspire us to make each issue better than the last.

— Christopher Schwarz

John Brown: 1932-2008

00/00/0000, 00:00 | Woodworking blog Woodworking Magazine

When we started Woodworking Magazine, one of the things we definitely wanted to include as part of the fabric of the publication were quotations about the craft that made us laugh or think.

And when we launched our first issue in March 2004, there was no doubt or discussion about what quote would be emblazoned at the top of the first page:

“By all means read what the experts have to say.
Just don’t let it get in the way of your woodworking.”
— John Brown, welsh stick chairmaker

Brown, who died June 1, is in my estimation the most influential writer on handwork of this generation. His columns in Britain’s Good Woodworking magazine inspired thousands of woodworkers to attempt or even completely embrace handwork.

His columns were short epistles on topics philosophical, mundane or both. He might offer a recipe for bacon in one column, offer plans for a workbench in another and in a third comment on the sad state of woodworking where we have traded skill for speed.

Brown was at times crotchety in tone, other times apologetic (to turners in particular); but he was always the spokesman for anyone who wanted to take hammer in hand and try to build something – either fantastic or mundane – using hand tools.

Brown himself was a boatbuilder who was made obsolete by fiberglass watercraft. After spotting a primitive Welsh chair in a shop in Lampeter, as Brown put it: “It was like a vision. I had never seen anything that had made so instant an impression on me.”

And so he built a Welsh stick chair like the one from his vision. He began selling them. He began writing about them. “Welsh Stick Chairs” was published in 1990. It’s a short volume, but is one of my prize possessions. In it, Brown gives a concise history of the Celts and their furniture. Then a short history of his love for the craft. The remainder of the book is photos of Brown in action, building what he calls a “cardigan chair.”

I first encountered his column in Good Woodworking in the mid-1990s. Brown had begun writing for the magazine during issue 13, I believe, which was the November 1993 issue. It was called “The John Brown Column,” and discussed mostly chairmaking, but with all hand tools. His run of columns there ended 32 issues later with a condemnation of power machinery in June 1996.

After a year of respite, Brown returned to the pages of Good Woodworking in issue 58 and continued for a couple more years. The last column I have of his is from December 1998. He continued as a chairmaker for awhile but during the last decade, Brown turned his attention to studying art.

"The John Brown Column" – sometimes titled "The Anarchist Woodworker" – was so inspiring to me, it’s difficult to quantify. I think it’s best said that if I had to have only one hero in woodworking, it would be Chairman Brown.

Not only did his writing encourage my hand-work skills, he also inspired me as a chairmaker to the point where I even ventured into the Canadian wilderness to take a class in Welsh chairmaking from David Fleming, a Cobden, Ontario, chairmaker who is Welsh.

All this detail above might make me sounds a bit like a stalker, but I never met John Brown. It was one of my primary goals for the coming years, which I can now bitterly cross off my to-do list. My plan was to ask if we could reprint his columns in book form so they could receive the wide audience they deserve. That project might be in limbo now, but perhaps his heirs will be willing.

If you can get a copy of “Welsh Stick Chairs,” you certainly will get the flavor of his writing and wit. And if I have any luck, perhaps you’ll also get to read his columns and then understand the loss the world of handwork has suffered this week.

— Christopher Schwarz

Roubo Volumes Now Available in the United States

00/00/0000, 00:00 | Woodworking blog Woodworking Magazine

Most of you know how much I like Andre Roubo's "L'Art du Menuisier" – probably the best and most complete books on woodworking from the 18th century. Heck, I've even considered taking up my French studies again just to be able to read it (more on that later).

However, getting copies of Roubo in this country has been nothing less than frustrating. I got a couple modern reprints through a bookstore in Quebec. And several French web sites carry them (with ghastly hoops to jump through to get them into this country). And all of my efforts to get a reliable and reasonable source in North America have proved fruitless.

Until today.

Thanks entirely to Joel Moskowitz at Tools for Working Wood, reprints of all five volumes of Roubo are now available for sale. These books are immense fun to page through, even if you don't read French. That's because the plates – hundreds and hundreds of glorious line drawings – will teach you more about furniture, marquetry and hand tools than I can. Plus you likely will be inspired to build one of Roubo's benches once you see them in use throughout the book. That's what sold me.

The volumes sell for $70 to $90, which sounds like a lot, but it's worth it. When I was importing these from Canada, that's about what I ended up paying (maybe a bit more once you included international fees). These books will be with you forever, and who knows how long they'll be available.

The other news is that we have some more exciting news about Roubo that we'll be announcing on my personal blog this weekend, LostArtPress.com. This is a personal project that I and another woodworker have been slaving over for a while. So do drop by LostArtPress.com this weekend and check it out. I think you'll be glad you did.

— Christopher Schwarz

LJ Woodworking Awards - Summer 2008 #4: And The Winners Are...

00/00/0000, 00:00 | LumberJocks.com :: woodworking showcase

Our great Summer 2008 LumberJocks Woodworking Awards are over so allow me to officially announce the winners. The winning projects were selected from 84 total submissions in an online voting held from Aug 4 to Aug 7. 211 votes by 110 voters were cast during this period.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

BEST OVERALL LUMBERJOCK

1st PlaceGaryK (448 points)

2nd PlaceMichael Brailsford (142 points)

3rd PlaceKarson (133 points)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

ONE MAN’S JUNK

1st PlaceRex Billiard Table by Michael Brailsford (142 points)

2nd PlaceMy Woodworking Bench from Salvage materials by Karson (133 points)

3rd Place'Safety' A Clamp made from a shipping crate by GaryK (97 points)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

SERVE IT UP WITH CLASS

1st PlaceA Faberge Inspired Serving Tray by GaryK (351 points)

2nd Place'woven' cutting board in wenge, quartersawn white oak and honduran mahogany by DAN (115 points)

3rd PlaceFleur de lis Tray by CharlieM1958 (101 points)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Click here to see the complete results.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

I’d like to thank our sponsors for their support once again, so here they are:


Jack Rabbit Tool
The Wood Whisperer

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

And following are the three lucky winners of our stylish LJ shirt (randomly selected from all the voters):

  • kewald
  • windofthewoods
  • Bigbuck

Congratulations, everyone! I’m going to PM the prize winners shortly.

THANK YOU LUMBERJOCKS! I’m already looking forward to the next Awards edition in the winter…

My Town Tour - Brezno, Slovakia

00/00/0000, 00:00 | LumberJocks.com :: woodworking showcase

I’d like to invite you to a brief tour of Brezno – nice small town in the heart of Slovakia where I’m living now.

Let’s see what Wikipedia has to say about Brezno’s history:

“The place has been inhabited since prehistoric times, but the current town arose from an old Slovak settlement, next to which newly arrived German miners erected a typical square market in the early 13th century. The first written evidence of the town’s existence is dated 1265 when King Béla IV of Hungary issued a charter for the hunters from the area of Liptov allowing them to use woods around the settlement, known as Berezuno. The name is derived from the Slovak word “breza” for birch. In the nineteenth century Brezno was a typical almost purely Slovak town and was one of the centres of the Slovak national movement. Since Second World War it has developed into an industrial town.”

“According to the 2001 census, the town had 22,875 inhabitants.”

... and this is interesting info too: “Brezno is twinned with the French town of Meudon, Nový Bydžov in the Czech Republic and Ciechanów in Poland.”

Tour continues with some beautiful photos. Enjoy…

History

From the sky

Courthouse

Town square

Panorama

Storm

Gray Bear golf course near Brezno

Low Tatras in winter

Wikipedia's page about Brezno
Nice article at Spectacular Slovakia
Beautiful photos of the region at Hiking.sk
Map of the Upper Hron River Region

Thanks to jeanmarc for posting his region tour today. He inspired me ;)

Hope you enjoyed!

Wendell Castle Interview - Part 1

00/00/0000, 00:00 | Furnitology Productions

This is a very important interview for the furniture design and woodworking community as a whole with Wendell Castle.

Those of you who follow the blog are prepared for this interview. You have been exposed to his web site, gone through his design process, and I have built a piece inspired by Castle in stack and bent lamination, techniques that Castle brought to the forefront in pushing furniture design. This interview is the culmination of presenting to you, a very important figure in our craft.

We all know Maloof, Nakishima, and Carpenter, but it was Wendell Castle who pushed the boundaries of art and furniture. And one of the original 5 to open the Smithsonians', Renwick Gallery.

Enjoy part 1 of the interview, I'm excited to be with Wendell, and we go into areas other individuals wouldn't know how to get to.

Prior to our sit-down, Mr Castle menioned he didn't know the answers to many of my questions, but that's OK, lets just go somewhere. What a great opportunity this approach provided me and it played out to the max.

Enjoy.................. history will prove this interview to be very important.

Neil

Formats available: Quicktime (.mov)

Episode 34 - Fine Furnishings & Fine Craft Show: Part Two

00/00/0000, 00:00 | T Chisel - The Rough Cut Show!
Day two of the show finds Tommy talking with more interesting craftsmen-and women-including: Randy Crossman who does hand-cut wooden jigsaw puzzles up to 4,000 pieces; Robert Reiss of Window Views puts photographs behind window panes; Gary Keener who makes beautiful furniture and won Best in Show 2007 for Furniture-Traditional Body of Work; Harold Shapiro and Michele Sommer-Shapiro who make furniture and do metalwork using a lot of recycled materials; Joe, a stone carver, creates fountains as well as lamps that burn oil; John Rundlett, a woodworker, specializes in toys; Holly Alderman uses photographs to create tapestries and "all kinds of things" inspired by sculpture; and Jacquelyn Rice, a self-described "artist and maker," who makes whatever she dreams up.

The Best Work; the Simplest Benches

00/00/0000, 00:00 | Woodworking blog Woodworking Magazine

Editor's note: Because it's "Workbench Week Internazionale" I decided to tie up a loose end from my book: "Workbenches: from Blah, blah blah to Yadda yadda yadda." On page 57 I discuss Thomas Stangeland's bench and point out how the best woodworking I've seen has been built on the most minimal of workbenches.

Helpful reader Tom Moore visited Stangeland's shop recently and snapped the above photo of the bench. Below is the story that goes with that workbench.



In 2006 I taught a class in handwork at a school where Thomas Stangeland, a maestro at Greene & Greene-inspired work, was also teaching a class. Though we both strive for the same result in craftsmanship, the process we each use couldn’t be more different. He builds furniture for a living, and he enjoys it. I build furniture because I enjoy it, and I sell an occasional piece.

One evening we each gave a presentation to the students about our work. One of the pieces I showed was an image of my French workbench. I discussed its unusual workholding devices and how the bench was a bit of a Thor Heyerdahl experience.

Thomas then got up and said he wished he had a picture to show of his workbench for the last decade: a door on a couple horses. He said that a commercial shop had no time to waste on building a traditional bench. And with his power-tool approach, he just needed a flat surface and some clamps to work.

It’s hard to argue with the end result. His furniture is beautiful.

But what’s important to note here is that you can get by with the door-off-the-floor approach, but there are many commercial woodworkers who still see the utility of a traditional workbench. Chairmaker and furnituremaker Brian Boggs uses more newfangled routers and shop-made devices with aluminum extrusions than I have ever seen in a shop. And he still has two enormous traditional workbenches that see constant use.

The point here is that a good bench won’t make you a better woodworker. And a not-quite-a-bench won’t doom you to failure. But a good bench in any shop will make many power-tool operations easier and open the door to permit you to try many hand-tool operations. The bench is simply another tool. It’s the biggest wooden clamp in the shop.

As Thomas was wrapping up his part of the show he showed an interesting slide of an enormous and thick slab of an exotic wood he had been stashing for years and years in his shop.

“I just need to find the right project for it,” he said.

“Hey Thomas,” I heckled, “that slab sure would make a great benchtop.”

He laughed. Next slide, please.

— Christopher Schwarz

Ep13 Carlo Mollino 03

00/00/0000, 00:00 | Furnitology Productions



Furniture design can take the form of many different shapes. In episode four of our Carlo Mollino inspired coffee table, we find....our...shape.

From a picture to full scale drawering, to the construction of our bending form, you'll see our bending ply take a shape Carlo Mollino would be proud of. One of Birds-eye maple the other of Plum Pudding Mahogany.

Enjoy and let me know what you think!!!!

Carlo would.

Formats available: Quicktime (.mov)

Ep 12 Carlo Mollino Design 03

00/00/0000, 00:00 | Furnitology Productions

In this the third installment on a furniture design inspired by Carlo Mollino, we prep our bending ply, build our bending form, and construct a fixture for a machine operation, specific to the router.

This woodworking podcast presents alot of woodworking material, you'll witness how traditional woodworking meets contemporary materials.

The episode expressed an opinion on how a furniture design is mentally pushed forward by always having a prepared solution.

This Carlo Mollino video continues to encourage and push the Basement Garage woodworker to explore furniture design.

ENJOY!!!!

Formats available: Quicktime (.mov)

Ep 11 a Carlo Mollino Design 02

00/00/0000, 00:00 | Furnitology Productions

Here's our second episode on the Carlo Mollino inspired coffee table. Our homage to the charismatic Italian Architect and Designer from Turin Italy.

We start with a snap of furniture history and begin to develope the atmosphere that Carlo was trained in and worked arounded.

Construction engineering is dealt with in this Mollino furniture design and a present day solution is found. Our bending form template is completed and we press our 2-ply, the answer to our construction issue.

This Carlo Mollino form just gets more exciting.

Enjoy........Neil

Ep 10 Carlo Mollino 01

00/00/0000, 00:00 | Furnitology Productions

So welcome to the world of Carlo. Carlo Mollino that is. This is the first Episode of interpretting a glass top coffee table, inspired by Italian Designer Carlo Mollino.

It's a bent plywood piece that we'll produce with a finished surface of Bird-eye Maple and maple trim.

Furniture design moves forward and stalls then forward again only to stall, Carlo Mollino was a Furniture Designer always in forward position.

Come along for the ride as we investigate the life and interprret one of his famous pieces. It's a complex build but Carlo wouldn't have it any other way.

So hop in the Bisiluro and lets go!!!!!

Formats available: Quicktime (.mov)

Some thoughts on dovetails - part I

00/00/0000, 00:00 | Sauer & Steiner


For the last several weekends, I have been working on our kitchen drawers. I have just crossed a major milestone - there are more drawers completed than remain (only by 1... but it still feels great!). So I have had “dovetails” floating around in my head quite a bit lately.

There was in interesting thread about dovetails in one of the forums a week or so ago. The thread was titled “Skinny pins in hand cut dovetails”. After reading most of the thread - I started thinking on my own dovetail evolution - and the whys and how's of it. I have also had a bit of an epiphany moment sparked by that thread, and it has to do with the relationship between process and efficiency. I am fully aware that I may to step on a few toes with this one - and I am fine with that.

My goal with woodworking and planemaking is to become extremely efficient while continuing to improve my accuracy... and in that order. I make my living in the woodworking field - I have to be efficient. So everything I do is motivated by using the fastest method even if it means a slow initial learning curve - complete with bumps and errors. Sharpening is a perfect example. I made a very conscious decision to learn to freehand sharpen because once you know how - it IS the fastest way to sharpen. Sure, it made for a lot of frustrating sharpening sessions and the dizzying parade of sharpening jigs were quite tempting - but I can honestly say I am glad I stuck to my guns and learned to do it freehand. I am now fast at it, and don't hesitate to stop work to restore an edge. I will write more on freehand sharpening in another post.

Back to dovetails & efficiency. I believe that the dovetail joint is a functional mechanical joint that can be extremely beautiful if well executed. There are a lot of times when dovetails are used and they are not seen - and in these instances how it looks is less important (though they still need to be tight fitting and designed for mechanical strength). The drawer is usually to blame for all the discussion about dovetails - skinny pins vs fat pins, machine cut vs hand cut, spacing, angles, pin lengths etc. This is because these dovetails can be seen, and rightly or wrongly, have come to symbolize the quality of the piece they live in.

I decided that I would hand cut my dovetails for several reasons (in no particular order). I like the somewhat random and irregular look of handcut dovetails - they tell me that a person spent time making this - and I like that. I like skinny pins - especially in contrasting woods - they make everything look lighter and more delicate. I like irregular spacing. I tend to put narrower tails on the outside edges and gradually increase them as they get closer to the center. It means I don't need to do as much math and is really quite fast to lay out. Here is an example;


The tails on the top and bottom are 3/4", 1/16" pin, 1" tail, 1/16" pin, 1-1/4" pin. It makes for a somewhat rounding effect.

Once I made the decision to hand cut my dovetails it meant I needed to be as fast and efficient as I could be. To me, this means the goal is to be able to fit the dovetails off the saw - no paring. My friend Karen was over a few weeks ago and we were talking about this as we stood in a sea of kitchen drawer parts. I commented that I was going to cut to the line and not intentionally cut inside and then pare to the line. If I overcut and there was a gap - so be it. I would not scrap the drawer but live with it. I explained that I felt this was part of my learning process and working towards maximum efficiency. She gave me an affirming nod and agreed. As we continued to talk we realized that there are many woodworking schools out there that teach to cut well inside the line and to pare to get the right fit. Looking at that now - it seems a little off - it is teaching a process where the outcome is consistently a 10 hour dovetailed drawer! It may be beautiful and perfect - but the process strikes me as questionable - not to mention it is unrealistic to expect a client to pay for a drawer that took 10 hours to make. I would much rather endure the pain, suffering, and disappointment of a few gaps here and there knowing that I am slowly, over time, getting closer to dovetails that fit right off the saw (I am aware that I am building drawers for my own use and not for a client - so I do have the luxury of “learning” through my work). So with that in mind - here are a few examples of dovetails I have produced spanning my entire wood