If you find there is any copyright abuse, contact us as soon as possible, thanks.
Antique Bus and Trolley Restoration
00/00/0000, 00:00 | WoodworkingONLINE.com
John Singley of Tucson, Arizona sent us a reader’s tip for ShopNotes magazine. In his letter, he mentioned that he volunteers for the Old Pueblo Trolley Museum. John says,
“The trolley I am working on is the Lisbon/Aspen P&MU. It was taken down to the frame and we are replacing most of the woodwork. We have been working on it for 2 years and expect to have it complete and in operation in about another year.”
Needless to say, there is a lot of woodworking that has to take place to restore these vehicles to their former glory. Check out some of the restoration work at the museum’s web site.
Robert E. Lee's Medicine Box
00/00/0000, 00:00 | The Village Carpenter
Before visiting the new Gettysburg Visitor Center, I didn't know that General Lee even had a medicine box.
The center's museum houses clothing and war relics from, and features short films about, the American Civil War. The layout is a conglomeration of displays in a dimly-lit maze of walls, media screens, and glass cases. Very atmospheric. You could easily spend hours admiring artifacts and reading and viewing film about the war.
Halfway through the museum I happened upon these unexpected gems—General Lee's medicine box and campaign desk.

The photos are out of focus because all pieces are behind glass and flash is not permitted.
The medicine box, I'm guessing, is about 14" tall,12" wide, and 12" deep, and is filled with little cubbies and tiny drawers. The cubby partitions are only about 3/32" thick. Both sides of the case are removable and were laying beside the cabinet. The front opens like a door and I believe the wood is cherry.

The campaign desk may be walnut.
My only thought upon viewing the cabinet, after closing my slackly-opened jaw..."I must build this someday."
I hope to gain access to this piece in future in order to take measurements and detailed photos. The museum opened within the last year, so access to the relics
will not be allowed for some time.
But I did obtain the curator's phone number and plan to contact him about it, using my best "nice lady" voice. Wish me luck!
New Bamboo Ring
00/00/0000, 00:00 | Wood Rings by Simply Wood Rings
This ring was very hard to make because Mother Nature has designed Bamboo to break at its cell end. This allows for the regeneration of new cells to continue the its growth. With a properly controlled double steaming, I was able to bend this Bamboo into the shape you see here.Order yours at:
http://www.simplywoodrings.com
More Radial Arm Saw Adjustments
10/11/2008, 04:41 | A Woodworking OdysseyIt has been years since the radial arm saw came into my shop, and I have not used it at all because it was not set up accurately. I've been working on fixing this over the last two weeks, and I'm getting quite familiar with the settings.
The thing that took me longest, was getting the table to be nearly perfect in its alignment with the saw arm. I had spend hours trying to get this right, and I was getting nowhere until I learned the trick from a book called Fine Tuning Your Radial Arm Saw, by Jon Eakes. The secret was to adjust four reference points on the table and use a crescent wrench as a lever for fine positioning. This simple trick was a huge revelation, and once I learned it, adjusting the table was done in under an hour. I'm sure I could do it in under 30 minutes now if I needed to do it again.
I'm now most of the way through testing and adjusting the saw. I hope to finish tomorrow and start ripping stock for the storm windows I need to build. I guess I just needed a big project (ripping and chopping the stock for 5 storms) with a deadline (winter) to motivate me to get this machine working. There was no way I was going to rip all that stock by hand.
Little Boxes
00/00/0000, 00:00 | The Village Carpenter
Is it just me, or do all woodworkers find boxes irresistible? I'm especially attracted to small ones that you discover tucked behind a mountain of other goodies at an antique store. The desire to open the lid to see what the box contains is unsquashable. Even if it turns out to be empty, it was worth looking, wasn't it?The writing box features a 1/16" thick lid with detailed pull for a small compartm
ent, and 1/16" thick tongues on the breadboard ends of the writing surface that conceals a larger compartment. Details like this reel me in.A little finger-jointed box (also box-jointed), measuring just 1 3/8" x 3 5/8" x 1 5
/8", has a sliding lid with finger pull. All the pieces are 1/8" thick. I have no idea what a miniature box like this might have housed. Maybe drill bits?Another one of my favorites is a sharpening stone holder that measures 1" x 4 5/8" x 5/8". The lid is hinged and a pin keeps the lid in place. The recess that holds the stone was removed with a chisel, so this box started out as one piece of wood.
The stone also started out as one piece, but quickly became two, as I promptly dropped it upon leaving the antique store where it was purchased.

It might be the spirit of discovery that drives my box attraction—the same reason I love to poke around shops belonging to woodworkers who are pack rats. My shop is on the tidy side, so it's a little dull. But shops with stacks of "stuff"...well, they're just the bee's knees.
Or, to coin a new woodworking phrase, maybe I should say.....
wait for it.....the box's knees.
Book review: Workbenches: From Design And Theory To Construction And Use
00/00/0000, 00:00 | UnpluggedShop.comWorkbenches: From Design And Theory To Construction And Use by Chris Schwarz is a book that every amateur hand tool woodworker should study thoroughly.
For most hand tool woodworkers, there is no more important tool in our shop than our workbench.
I just don't know how I can overemphasize the significance of this book. If you are thinking about buying or making a workbench, you should just get it. If you must, borrow it, but get it. read more »
Back panels...
00/00/0000, 00:00 | The Refined EdgeAntique Traditional Kudus House
09/09/2008, 06:06 | Antique Knockdown Carved Wood House The architect mostly achieves the ideal process of culture combination and success to represent a unique colour of
The roof construction of traditional house of Kudus shows the level of wealthy of the owner since cost to make the roof is the highest cost compare with any other parts of the house. The expensive cost was because of the motifs perfection and the carved style also the difficulty on the process to construct it.
The Pencu style roof (the towering roof) used to be made of Rumbia (a particular kind of palm leaves), but now more likely to be made of tiles. Kudus tiles often have special plant motifs, and there are the so-called genteng gajah (with elephant ornamentation) on the wuwungan (the topmost row of tiles), and the genteng raja (king tiles) which are beautifully decorated.
The design interior of the traditional house of Kudus looks simple and divided into Jogo Satru room as a guess room, which in the standard traditional house of Kudus the cover area is around 3 x 10 msq. In this room, the floor is lower around 1 m from the main room (inside room) and is a part of the fourth step or floor.
Then, inside room (jogan lebet) is a fifth step with area around 7 x 10 msq. A chair uses as the connection between the two rooms because of its level differences.and as partition between the two rooms used Gebyok.
Inside the inside room (jogan lebet), there are several rooms such as living room located below the joglo, then bedrooms and gedongan as the place to keep the heilroom and wealthy. Gedongan placed between inside room and pawon (kitchen) that located in the left or right of the house.
This pawon except use for cooking and dinner room, also use for the family activity, such as made of convection products and other home industries. In front of the pawon, precisely in the edge part of the yard placed well complete with the bathroom.
There are several types of doors in the traditional house of Kudus, there is one door, two door and sliding door. One door is usually for the kitchen, two doors in gebyok and the sliding door is in the front.
One thing that necessary to be noted is that traditional house of Kudus always build face to the south that full with the philosophy meaning and based on the natural rule of rational calculation.
First Turned Screwdriver
00/00/0000, 00:00 | Wood Destruction by a Woodscrub
Rockler currently has their 4-in-1 screwdriver kit on sale for $5.99 so I grabbed a couple. I needed some screwdrivers for work anyway, and thought this would be a great chance to try turning one myself.
The handle is cherry, and the black lines were done by wire burning, a technique where a stiff piece of steel wire is held in a groove cut into the spinning workpiece. Hold the wire in the groove until it starts to smoke.
The hole for the shaft is made with a 5/8 spade bit on my craptastic drill press. The hole isn't perfectly straight, unfortunately. I really need a new drill press! The head of the unit shifts when pressed down into the cut causing an angled hole.
The finish is a 3# cut of amber shellac applied over some BLO (boiled linseed oil). I rubbed the shellac into the spinning handle on the lathe. Gave it a wonderful hand rubbed look.
If you get a chance, give one of these screwdrivers a try. Lots of fun and useful too!
That green mallet
00/00/0000, 00:00 | Sauer & Steiner
Over the last several months, quite a few people have noticed and asked about the “green mallet” in the background of many of my photos. Here is the story...
I have never used or owned a proper mallet and when my friend Andrew Dix heard this - his wheels quietly started spinning. A few months later a package arrived.

Everything about this simple looking tool made sense to me and more importantly - every detail had been carefully planned out... nothing was accidental. The shape of the head was elegant, but also performs its function perfectly. The slight taper put a bit more weight at the top - where maximum force can be applied while striking. The handle is shaped in a way that your hand holds the mallet in a balanced position.

But the above photo is what really did it for me. This tells me the person who made this tool is aware of function first, but the aesthetic is just as important. Andrew took the time to rotate the endgrain of the handle so it lined up with the endgrain of the Verrawood head. And the Padauk wedge bisects it perfectly. This may seem like an insignificant detail - but this is the sign of a toolmaker who is passionate, thoughtful and knows when to add a “touch”.
I have been using this mallet daily ever since it arrived, and I have not a single complaint or comment to improve on it. There is a lovely dark band around the head where it has struck the ends of many of my Imai chisels. Aside from the discoloration - there is no damage. I suspect Riley and Lucas will be using a pristine mallet when I am long gone.
Very shortly after this mallet arrived, I contacted Andrew to (strongly) suggest that he consider making these available to the public. He was at first a little surprised and reluctant - but every time someone sent me a note to ask about the mallet, I contacted Andrew to let him know of the interest. I am thrilled that he has gathered appropriate materials and is now prepared to take on a few commissions.
The base mallet has a Verrawood head and either Cocobolo or East Indian Rosewood handle (any wedge material) . The price for this mallet is $250 US. He also has a good supply of African Blackwood, Kingwood, Ebony, Palisander Rosewood, Brazilian Tulipwood, Bois de Rose and Zircote as alternative handle material. The mallets can range from 16oz. to 24oz.
Andrew Dix can be reached by phone (804)678-9246 or email; dixja@vcu.edu
If anyone is interested - an offcut from your plane would make a wonderful wedge in one of Andrews mallets.
A New Way To Browse LumberJocks Projects
00/00/0000, 00:00 | LumberJocks.com :: woodworking showcaseHey matt (napaman), no need to bug me about the next, previous project buttons – anymore ;) Each project page now features 2 new navigation widgets with thumbnails of the previous and next projects. Just click on any thumbnail and you will be taken to a respective project page.
Author’s projects are first… followed by the Everyone’s projects:

Enjoy!
Who Needs the Dakotas???
00/00/0000, 00:00 | Skiving OffAs I've said before, I realize we have something of an international following. Although our penetration into the Middle East is still lagging behind, that is to be expected given most entries are written in English. (Wir koennten auch auf Deutsch schreiben, aber meine deutsche Freunde sprechen Englisch besser als ich Deutsch spreche.)
For me, the shocking thing about the map is the lack of blog visits from the Dakotas. I am left wondering if there is a vast Dakotian conspiracy in place to suppress my efforts, or at the very least to ignore me. Is it not understood that I am a black hole of emotional need who requires an endless spate of encouragement and edifying comments?
If you have family, friends, or loved ones currently residing in (or incarcerated in) North Dakota or South Dakota, I encourage you to write them, call them, or use the phone thing to talk through the glass to them and ask them to hit the blog during the next week. We need red dots on the Dakotas.
Let's face it, people...how can I start pressuring the Skiving Off Regional Market Managers in Europe and Asia to improve their market penetration numbers for next quarter when we haven't even secured the Dakotas that sit a mere three states away from me?
317 Jointers Revisited
00/00/0000, 00:00 | Matt's Basement Workshop PodcastJim wrote in a while back about the pros and cons of hand plane jointers vs power jointers.
This is a recurring question with many listeners so I thought I'd share the answer and then also some extra thoughts that I had after I sent Jim my response.
The winners of the Wood Talk Online Giveaway (sponsored by Lee Valley) are:
Richard Sylvestre and Mack McKinney.
They each will receive one of Lee Valleyâs new Skew Rabbet Planes!

So if you're not Richard or Mack don't give up hope of getting your hands on these great planes. You can get both of them on sale at a great reduced price for two more days.
Lee Valleyâs special promotional pricing ends 10/15/08. Trust me, once you've tried one of these, you'll fall head over heels for them!!
Sorry no video today...minor technical error!
If you'd like to enter for free schwag, have a comment, question or suggestion, drop me a line at mattsbasementworkshop@gmail.com or head over to the website. Or...leave a voicemail at 231 354-2338.
Listen to today's show by clicking on the player below
To download directly to your computer Right Click on direct download, choose "Save Target as"
Ep 9 - Lingerie Finale
00/00/0000, 00:00 | Furnitology ProductionsWell we've come to the end of the Contemporary Lingerie Cabinet.
In this Episode we evaluate the entire finished case, we revisit some of the important design elements, discuss how important they are in the final appearance of the Quarter Sawn Ash Lingerie Cabinet, and answer some e-mail questions.
This is a Modern piece of furniture done with a minimalist approach so there is nowhere to hide poor craftsmanship. The cabinet is a very, very good build.
Enjoy and look forward to our next project as we investigate Italian designer Carlo Mollino.
Neil
307 Hendrik in September Pt. 2
00/00/0000, 00:00 | Matt's Basement Workshop PodcastIt's Monday and we're starting this week off with the second half of our September visit with Hendrik Varju. We pick up the discussion with Mike's question on cross-grain glue-ups. Enjoy!!!
The article recommended by Hendrik for dealing with compound joinery is in the October 2002 #158 issue of Fine Woodworking Magazine, p.96 in the Masterclass section.
Also as a special announcement, exclusively here at MBW, Hendrik has just released his latest DVD "Revelations on Table Saw Set-up & Safety". Now available for purchase at his website.
If you'd like to enter for free schwag or just have a comment, question or suggestion drop me a line at mattsbasementworkshop@gmail.com or head over to my website at 231 354-2338.
Listen to today's show by clicking on the player below
To download directly to your computer Right Click on direct download, choose "Save Target as"
314 Building The Chisel Plane Pt. 2
00/00/0000, 00:00 | Matt's Basement Workshop PodcastIt's finally here! Pt 2 of building the chisel plane will cover the construction of the chisel plane. Now that we have the jig that'll hold the blank in place, it's time to do something with that blank.
Many of you sent me the plans to the FWW article featuring the chisel plane construction in issue #148. Here's a link to it Wooden Chisel Plane.
If you'd like to enter for free schwag, have a comment, question or suggestion, drop me a line at mattsbasementworkshop@gmail.com or head over to the website. Or...leave a voicemail at 231 354-2338.
To download directly to your computer Right Click on direct download, choose "Save Target as"
introduction
00/00/0000, 00:00 | Traditional Tools & NewsHistory Traditional Kudus House
09/09/2008, 06:07 | Antique Knockdown Carved Wood HouseKudus is a city in the Central Java, Indonesia, located among Jepara, Demak, Pati, and Purwodadi districts and in the route of Semarang the capital city of Central Java to Surabaya (please see location map). Based on story, Kudus name was from Al-Quds, which mean holy.
Click image to enlarge
The history of Kudus cannot be separate from the name of Sunan Kudus as the founder and one of the Wali sanga (nine Wali) spreader of Islam in Java at that moment. As his inheritance, Kudus has a famous artefact called Menara of Kudus which form like a temple, placed in one complex with mosque of Menara Kudus that build by Sunan Kudus around 1685 M.
Except famous as a Wali city, since in Kudus area there is wellknown also Sunan Muria, Kudus also known for a long time as a kretek city (city of clove cigarette) as there are many entrepreneurs in the cigarette field. Beside that, Kudus can also called as city of industry because of the long development of industry in the area such as industries in cigarettes, papers, printings, handycrafts, embroideries, foods, etc.
Kali Gelis (Gelis river) which lying in the midlle of the city separates Kudus into two areas, one is Kudus Kulon (west Kudus), the other is Kudus Wetan (east Kudus). Long time ago, according to history, citizen of Kudus Kulon area were entrepreneurs, traders, farmers and moslem theologians, while occupant of the Kudus Wetan area were government officers, intellectuals, teachers, nobles and noble relatives.
Within the growth and development of Kudus, physically Kudus Kulon area, where the majority of the citizens were entrepreneurs and traders, were a steph forward in wealthy compare with the other area Kudus Wetan. With their financial increasing, they build the traditional wooden houses of Kudus full with carved that make it different with the previous traditional houses. That is why, the amazing traditional house, which lately called as the traditional house of Kudus used to only placed in the Kudus Kulon area. At the beginning, the traditional house of Kudus only belong to the Islamic Chinese traders, but furthermore were copied and developed by the native wealthy traders.
The traditional house of Kudus that mostly build before year 1810 M, ever reach the glorious time and become a symbol of prosperity for the owners. The Kudus Kulon area environment was formed with the particular existency of the traditional house of Kudus.
The developing history of Kudus has many influences from foreign cultures like Hindu, Chinese, Persia (Islam) and Europe, which also influence the architectural field in made the traditional house in Kudus. From the research, it can be concluded that there are several motifs colouring the carving style of the traditional house. One is Chinese motif, which form as the dragon carved, Persia or Islam motif that form as jasmine flowers or the particular motif of Kudus that form as lotus flower and colonial motif that form as ropes, crown, and animals. All motifs have correlation with the incoming cultures to Kudus.
The carving art of Kudus dominate by lotus flower as the meaning of Hindu religion. Sunan Kudus introduced a carving dominated by jasmine flowers that described united one to another. The meaning of jasmine was to describe that Islam religion at that time was a small community but it like jasmine, even small, could give fragrance to the sorrounding area. Jasmine made united in one to another to describe that everybody in neighborhood were live in peace even there were differences in the religion.
Within development in making the traditional house of Kudus, influence of the elements of cultures were very viscous gave the meaning of form and function of every part, hence could be separate as follows:
1. Traditional house as the tools to spread religion (dakwah) *)
In the daily life, Kudus citizen are majority obedient muslem. Life of religious service is the social relations that have formed in the many aspects, such as in the house to live which full with the describing of the rukun Islam (Islamic obligation).
In the room inside, there is a place or room called gedongan which formed as mihrab, a place where imam (leader of praying) lead the pray that connected with the symbolic meaning as a holy place and sacral. Gedongan also has significance meaning used as the place of heirloom treasury and the wealth of the owners. Gedongan used also as the main honorables bedroom and at the particular time used as special bedroom for the wedding couple of the childrens of the owners.
Also in the room inside there are four main pillars, which called saka guru that desribe four essence of ideal life. At the top of the fourth pillars, putted tumpang sari where the roof was lying on. The sum of tumpang sari are always odd and always have a meaning, sum of five describe the amount of praying five times a day. The sum of three describe life in soul world, transitory (this world) and the world hereafter.
Front room that called Jaga Satru is provided for parish and separates into two part, left side for women jamaah (followers of imam) and right side for men jamaah (followers). Still in the Jaga Satru room at the incoming front door, there is one wood pillar in the midlle of the room which called balance pillar or soko geder, which has meaning except as the symbol of ownership of the house, it also has a symbol for reminding the resident about the One God, the only One who have to be homaged.
House as the tools to spread religion is represent through Islamic value that formed in the carved style at the partition between front room and inside room called gebyok. The strengthen element of gebyok are two stalk pillars where at its top made a carved that formed as palm of the hand of muslem when doing praying at the position of takbiratulihram (when start to pray) that always at the same time say the words Allahu Akbar which mean Allah The Mighty.
Carving in the gebyok, even it is accumulation from many culture influences, but the visualitation adopted from Arabic calligraphy with Al Quran and Hadist theme. There are many other dakwah messages that formed in the building decoration and it always about aspects of way of life and life attitude of human in do their obligation in the earth for their salvage in heaven.
2. Traditional house as a masterpiece art*)
Traditional house of Kudus if notice deeply is more and more fabulous since its uniqueness and attractiveness in exterior and interior which full with ornamen that made by highest skill woodcarving artist. Foundation of the existancy of the traditional house of Kudus was full with taste and creation that fashioned in the beautiful forms without broken any religion values. Through the activity of art, there is possibility of adding the atmosphere of the deepest metaphysic reality.
Traditional house of Kudus, if seen from Bernard Rudofsky theory, is include in the communal architect that priorities in the art element which done continuosly and spontaneously balanced by whole community with the same tradition from time to time following the ritual habit inside the communal. Art is not just copy and physical implementation of the external form, it also as the spiritual elements that achieve esthetic form. The creation becomes what it called architectural without architect.
The construction of the wooden house made completely knock down that make it easir to release and assemble hence there is possibility also to make part by part of the ornamen fully detail and accurate. The decoration was inspired by the success of temple relief and the development process was instructed by Chinese woodcarver from Sun Ging area. The owners were the wealthy entrepreneurs and traders. The carved decoration were build on the whole component intentionally without gave any empty space left and the results was very optimum, full of meaning, symbolic and the style were correlation among Java, Gujarat, Persia, China and colonial (Europe) style.
Wali Songo influence in the formed of decoration was very dominant even in Islam religion there is a forbidden in the formed of living thing, but they gave the chance of a huge tolerate formed as acculturation and assimilation on the evolutif way thus create a wonderful figurative consequence of imagination from the living thing forms. Art appreciation from the Wali Songo that full with tolerate also accomplished by khalifah in the Arab since Abbasiyah era. Palace of Harun Al Rasyid in Baghdad, palace of Al Mutasin in Samara, Cordoba mosque in Spain, also decorated by fresco formed lion, eagle, horses, and the other creatures. Drawing arts applicated in carpets, ceramics, wall and doors achieved the highest level to become the world admire.
Art ornamentation looks unite with the main building, since the creators were very concern with details, function, structure, ritual, symbol and esthetic that decoratively increase the attractiveness for whoever want to see it. The particular local habitual in the way of life through the architectural behaviour is the description of personification of the Kudus traditional house that make it different in form and style with the other joglo building in Java commonly, except in the form of the roof and soko guru as the support of the tumpang sari.
3. Traditional house as the Class symbol *)
The beautiful traditional houses of Kudus have average age for more than 100 (hundred) through 200 (two hundred). Due to the age of the building, if someone wants to analyze it, they have to use the examination within that era.
According to Prof. Berger, the structure of the Java community at the 19th and 20th century can be divided into several class such as; nobles, government officers, traders and farmers. Colonial politics at that time placed politic emancipation that have aim to liberate individual from old social band which consider shackles the freedom and law enforcement that hold mostly in the feodalism band. Development of individual in the community was appointed to the forming of personality, spirit effort in order to developing the prosperity soon.
In the other words, Kudus citizen that categories as pesisiran (near the beaches) citizen, their wealthy level mostly higher compare with the nobles and the officers at that moment. But in the daily life they did not get any self-respect and honor by the community. They way of living as a trader was qualified as second class and dishonor, hence as the compensation citizen of Kudus Kulon, that the majority were traders, formed the appearance of their house very glorious with the expectation that their too have the rights to get honor same with the nobles. The level of their house made in high five stairs to suit with the social strata like what it done by noble community. Guess from the farmers were accepted in the front room, for the officers community accept in the midlle room while for Bupati (distric chief) and Netherlands people were accepted in gedongan room. Surrounding the house was made high wall same as the form of palace.
Traditional houses that at the beginning owned by traders of Chinese moslem were copied and developed with the Javanese and Islamic values. All over the house were full of carved with ornament from many styles like in the palace of kings in Java, done by high skilled woodcarvers with very fascinating result. Accordingly, it worth to gets the confession of honor like government officers and nobles. For them, house were a symbol of status or stage that worth to get honor and equality.
(Source :* J Pamudji Suptandar, Great Lecture of Rupa art and Design Faculty of Trisakti University/Adopted in English by Deva's father)
The fascinating wooden carved at the traditional house of Kudus must be come from the very skilled woodcarvers. Then, from where the woodcarvers came from?
The carving style of the wooden traditional house of Kudus was quite distinct from the other famous carving centre in Java, Jepara. Historically, Kudus was a carving centre long before it developed as a skill in Jepara. Carving was introduced to Kudus when an emigrant from the famous carving city of Yunan - China, The Ling Sing, arrived in the 15th century. He came to Kudus not only to spread Islamic teachings but also to devote his skills to the art of woodcarving, and his style, Sung Ging, was famous for its smooth and wonderful woodcarving masterpieces.
The Ling Sing was wellknown as mubaligh (spreader of Islam) called Kiai telingsing. The name of Kiai Telingsing until now use as a name of a street in Kudus city. There is a kampong or village surrounding the street called Sunggingan that predicted came from the Sun Ging name. The area, at the past, was belief as the resident of the woodcarvers and carpenters from the devotion of Kiai Telingsing skills.
From the 16th to the 18th century, woodcarvers in Kudus received many orders to construct wooden houses. The main material - highest quality teak - was supplied from Blora's, Tuban's and Bojonegoro's forest. From the 19th century, however, high quality teak became scarcer and scarcer and this, in turn, discouraged the woodcarvers of Kudus to develop their skills.
The carving skills also belong to Jepara's people and has been very famous until now. There is an opinion, which said that wooden carved art in Kudus also done by woodcarvers from Jepara, eventhough in the reality it different in the carving models, especially in the mission and filosophy.
According the history, Mantingan mosque in Jepara has wall that made from carved white stone with the flower motifs that was masterwork of a Chinese called Tji Wie Gwan who brought by Raden toyib to Jepara after come back from his Islamic study in Campa for five years. Raden Toyib then married with Ratu (queen) Kalinyamat, the very famous Jepara's queen at that time.
For his achievement in build Mantingan mosque at the year of 1559, Queen Kalinyamat and her husband gave a new name for Tji Wie Gwan to become Sungging Badar Duwung, Sungging means carving expert, Badar same with stone and Duwung means tatah (tool for carv).
This Sungging Badar Duwung who then recognized as the root source of the Jepara's carving art which consecutively knowing in all over Indonesia and the world. According to history, he was too takes a part in the erection of mosque in Loram (a name of area in Kudus) and mosque of Menara Kudus.
Sungging Badar Duwung then devoted his skill to the surrounding community in Jepara as well as in Kudus and presented high skilled carvers that from time to time growth in numbers. This skill direct and indirect was useful in the process of developing the traditional house of Kudus.
The certainty of mentioned things were still need to be investigated furthermore. But for sure, the traditional house of Kudus has build and become one of the Kudus markers with its fabulous woodcarving.
Through the Pixelation I see Tina Turner...
00/00/0000, 00:00 | Skiving OffDon’t ever let it be said I am not a highly compassionate person.
I feel the pain of all of those in The Gulf who just suffered tragic losses from Hurricane Ike.
You see, Ike has stirred up a weather system that is now causing very heavy rain here in the Midwest, and as a result I am dealing with my own minor tragedy.
I don’t have any High Definition Satellite signals for my local stations, and the Indianapolis Colts game is less than 2 hours away.
Sure, I have High Def on all of the “premium” and normal channels one would associate with cable/satellite. However, Directv broadcasts their market-specific local channels through a Spot Beam Signal (for me its satellite 99s) and at the moment the rain is strong enough to be choking that signal out. Yes, I still have the standard definition signal that I will be able to watch the game on, but do you know how grainy standard definition football looks on a 47 inch 1080P LCD television???? It’s almost unbearable. Woe is me.
To a techno-junkie like me there are few things worse than being separated from technology. It's been that way for a long time. Nine or ten years ago, while others were showing off the early Palm Pilots, I was showing off a first generation Pocket PC that allowed me to accomplish REAL work in Excel and Word without having to drag a laptop around.
Nowadays, I am secretly bugged that I cannot access a free wireless signal in church. (Pastor, that’s the King James version of the Bible I am looking at on my PocketPC during your sermon. What do you think I am doing? Checking my blog hits?)
My cell phone obsession is worse than the WiFi one. I not only cannot live without my mobile phone…I now have to have a quad band phone so that I am ensured of coverage on the most remote outward parts of Papua New Guinea.
If you want me to have a full blown breakdown…just keep me away from my email account for more than 16 hours.
If you want me to do my impersonation of David Foster Wallace, just take away my cell phone and all internet access for only one hour.
Let me clarify one thing…I do go hours at a time without being either on the phone or on the internet. However, the mere thought of not having available access to those forms of communication causes me severe emotional distress.
I don’t constantly use high tech communications…I just need to know it’s available.
At the moment, I am starting to feel a little bit of that same TSA (techno-separation-anxiety) each time I switch from the grainy standard version of CBS to the high def version of that channel where I find a black screen with an update from Directv that says, “Looking for Signal In on Satellite 2… (771).”
Thanks to you, Ike, I have to watch Peyton, Joseph, Marvin, Reggie, Dwight, and Bob on a grainy big screen.
Ike, it wasn’t enough for you to just batter the coast, but you had to reach up here into the Midwest and put the smack down on me, too.
Apparently Tina Turner wasn’t exaggerating about your evil ways.
99c Store Turning Kit
00/00/0000, 00:00 | Wood Destruction by a Woodscrub
This pickup tool was purchased at the 99c store several years ago. Over time, the end and pocket clip have fallen off and been lost. The telescoping tube and magnet on the end are just fine however, so I never tossed it.
Last night I decided to see if I could turn a nice handle for it.
I mic'd the fat end of the telescoping tube and got 7.98mm inner diameter. I then loaded up a kingwood pen blank and turned a handle with an 8mm tip, 1/4" long. Finished with shellac and friction polish, the kingwood handle was inserted into the pickup tool with a few drops of CA glue.
The handle is in VERY snug and the glue will keep it from coming loose.
I may have to buy a few more of these things from the 99c store and see what else I can do with them!
Mock-ups
00/00/0000, 00:00 | Philsville
Hi Folks
For quite some time I've been working on a shoulder plane design. I know when it comes to planes you are re-inventing the wheel, but I really want to make a plane that I am proud of - and that is visually identifiable as a "Philly Plane".
I have plenty of sketch pads full of drawings and ideas. But I really can't "see" a design until I get to hold it in my hands - a potentially time consuming affair, especially as so many designs just don't work once they become "3D". So I have started to make mock-ups from scrap timber - they take minutes to produce, thanks to the bandsaw, scroll saw and sander. And you can instantly tell if you like the design - it is immediately obvious to the eye and hand.
So I have a growing pile of shoulder plane ideas, rendered in wood. And after much work, I have arrived at a design I am happy with. The finish is still drying on the prototype, so you'll have to wait until tomorrow for a photo. But I have attached a picture of some of my mock-ups - hopefully, this will inspire some of you to try this approach. It also works well with furniture designs - a hot glue gun and some offcuts will soon help you see your design in the flesh.
Cheers
Philly
284 Child's Bookcase Episode 5 - The Finale
00/00/0000, 00:00 | Matt's Basement Workshop PodcastTime for the fifth and final installment of the Child's Bookcase Project. In today's episode I demonstrate my finishing technique with Shellac and a few other goodies too. Of course I can't guarantee you'll learn much about the finishing but you should get a good laugh!
Coming up in September, Hendrik is back and we're doing an open Q & A session so get your questions in...
If you'd like to enter for free schwag or just have a comment, question or suggestion drop me a line at mattsbasementworkshop@gmail.com or head over to my website at www.mattsbasementworkshop.com or call our Skype Voicemail at 231 354-2338.
If you have the time, please take the new listener survey.
To download directly to your computer Right Click on direct download, choose "Save Target as"
The Cabinet Shop
11/12/2006, 14:55 | The Wood ShopBeautiful Mesquite Cabinets require the hand of a craftsman and Mesquite HardWood from ADM.
Photo Courtesy of Warsaw Woodworks
Fine Mesquite Cabinets installed By Craftsmen Like Joe Mozdziock of Warsaw Woodworks of Chino Valley Arizona really make an impression. This Kitchen Center Island was installed by Joe in the Prescott area. The Kitchen can become a place of warmth and beauty , and premium lumber from Arizona Desert Mesquite is the place to start. Here's a shot of some cabinets in the kitchen.

Contact :
Warsaw Woodworks
Joe Mozdziock
P.O Box # 2625
Chino Valley AZ 86323
(928) 636-0197
joemoz@netzero.net
Blackbeard & Vampira
00/00/0000, 00:00 | The Village Carpenter
If I had a kid, I would insist that blackbeard makeup be part of his everyday ensemble.
Advice on making wooden planes
00/00/0000, 00:00 | UnpluggedShop.comI am a bit cheap. I appreciate quality tools. I also happen to live in a warm sub-tropical Caribbean climate. I want to make some "woodie" planes.
Basically, I want to make a whole set of planes. I intend to start with something like a Jointer or Fore plane and then do a smoothing plane and perhaps a scraper as well as a router. Sometime, I also want to make a Jack plane to replace the hopelessly cobbled together metal boat anchor, I mean finely fettled antique hand plane, that I have. read more »
Episode 144 - Pallet Maker of the Month September 2008
09/30/2008, 09:00 | T Chisel - The Rough Cut Show!292 Workbench Follow Up...
00/00/0000, 00:00 | Matt's Basement Workshop PodcastLast week's episodes on the replacement of my workbench top have generated a few questions and some great feedback. As always when these come in, I can't help but share them with everyone...because I'm willing to bet there's plenty of you thinking the same things.
Hendrik is back in September so get your questions in for our open Q&A session and if you get a chance this weekend stop by and see him at the 5th Annual Welbeck Wood Expo.
If you'd like to enter for free schwag or just have a comment, question or suggestion drop me a line at mattsbasementworkshop@gmail.com or head over to my website at www.mattsbasementworkshop.com or call our Skype Voicemail at 231 354-2338.
Listen to today's show by clicking on the player below
To download directly to your computer Right Click on direct download, choose "Save Target as"
Chisel Use DVD
00/00/0000, 00:00 | David's blog
I am excited about the latest DVD as it concentrates on techniques for chisel use.
Chopping and paring ...




