Referring back to Flattening Traditional Oilstones on 15th Nov 07, here is a picture of the rounding or bellying of a chisel ...

When it comes to essential reads in the world of woodworking, I consider "Choosing and Using Hand Tools" by Andy Rae as one of the most important. 

Andy does a great job of presenting an amazing amount of information about a large number of tools both traditional and non-traditional to the woodshop.

This book isn't just filled with a few pictures and a couple of little descriptions of each tool, but instead Andy does a great job of making sure the reader has a good understanding of the limitations and capabilities of each tool and to which family they belong.

Copies of "Choosing and Using Hand Tools" can be found at both Sterling Publishing and also at Amazon.com.

Hendrik has agreed to come back in May to talk about starting a woodworking business.  So remember to get your questions in as soon as possible.

Also, Hendrik is starting his annual three part finishing seminars: 
Part 1 "Preparing the Surface and Staining" - April 26th or May 3rd. 
Part 2 "Hand Finishing and Rubbing Out"    - May 10th or 24th.
Part 3"Antique Restoration Techniques"      - May 31st or June 7th.
So if you live in the Toronto area or feel like visiting it, and you want more information about Hendrik's finishing seminars, send an email to info@passionforwood.com

Of course you can always drop me a line with your questions, comments, suggestions and schwag entries anytime.  Just send them to mattsbasementworkshop@gmail.com.

 Listen to today's show by clicking on the player below

powered by Podbean.com

 

 

 

To download this show directly to your computer just Right Click and "Save Target as".

This ring is made of salvaged walnut and a salvaged diamond to make a heart felt wood engagement ring. Contact me via email Here.

Start with a perfectly straight edge on a shortish board, say 15 to 20 inches long.

Take 10 full length, reasonably ...

A huge thanks to Shannon from www.rogersfinewoodworking.com for hearing the call and answering!  Shannon is today's guest host here at Matt's Basement Workshop and he's talking about woodturning.

This a great opportunity for anyone who's interested in getting started with turning, since currently I don't do it myself.  If you'd like to learn more about Shannon visit his blog the "Rennassiance Woodworker" or email him at shannon@rogersfinewoodworking.com. 

WIN AN iPOD TOUCH!!  If you have the time, please take the new listener survey or click on the link at the website.  When you do you'll be entered to win an iPod Touch.

If you'd like to enter for free schwag or just have a comment, question or suggestion drop me a line at mattsbasementworkshop@gmail.com or  head over to my website at www.mattsbasementworkshop.com or call our Skype Voicemail at 231 354-2338.

Coming up in September Hendrik is back and we're answering whatever questions you submit.  So get them in!!

Listen to today's show by clicking on the player below

powered by Podbean.com

To download directly to your computer Right Click on direct download, choose "Save Target as"

Hey everyone if you haven't heard already, Marc and I are trying another great experiment.  We're taking Wood Talk Online to a live format tonight at 8:00PM EST!!

Of course for those of you who can't make it, the show is being recorded as usual.  But if you have the time and just want to see what it's like when we're recording an episode of WTO stop on by to watch.

This can all be seen at www.thewoodwhisperer.com just click on the blog link and you'll have a front row seat to the show.  Also, there's probably going to be a little Q&A for anyone signed into the chat room.

So get there early to see all the fun...afterall nothing is funnier than watching me try not to hurt my brain on a hard question (OK easy questions too!!)

In this episode we look at attaching a fixed shelf by two different methods: Biscuit Joinery and with a Stopped Dado Joint.

Next, we look at different ways to reinforce our shelves so they won't sag under the weight that's put on them. We also talk about a cool program that can calculate for you, based on information you put in, whether your shelves are strong enough to support what you intend to put on them.

Finally, we look at how to cut the rabbit joints into the side pieces for the back to fit into so you end up with a nice, clean looking fit.

Thanks so much for watching, we hope you enjoy!

And as always, if you have any questions, or want more information, go to our website:

www.WoodworkersResource.com

Craig Stevens

Hey matt (napaman), no need to bug me about the next, previous project buttons – anymore ;) Each project page now features 2 new navigation widgets with thumbnails of the previous and next projects. Just click on any thumbnail and you will be taken to a respective project page.

Author’s projects are first… followed by the Everyone’s projects:

Enjoy!

Lunchtime Wednesday… halfway through my first week at my new job.

I have a very lonely office. It’s the biggest office I have ever had, but it is lonely. Besides the Herman Miller chair I sit in at the moment, my office has 4 “visitor” chairs. I have not yet had a visitor. There are a lot of small holes in the wall where the previous occupant had items mounted. He either had a very extensive collection of ego photos, or perhaps he used his down time to conduct seminars on rock climbing techniques.

The facilities manager said they would patch the holes and paint the office during the night sometime next week. I was told they have to paint it eggshell color, but I am hoping to slip him ten bucks and see if they will go with a different color that will complement the black light and associated posters I am bringing in.

This place is huge. The footprint is about 12 feet by 16 feet, but the ceiling is 12 feet high. So as I sit here typing, I feel like I am alone in a racquetball court.

In addition to the black light posters, I think I am going to put up a couple of FATHEADS. I was hoping to go with a woodworking theme. However, I just got off the phone with Highland Hardware and it seems that neither the Frank Klausz nor the Roy Underhill FATHEADS are available yet. How stupid is that? We can get three different poses of Warren Sapp, but we cannot get a single woodworking celebrity in FATHEAD form.

It doesn’t really matter anyway. At the moment, I am pretty ticked off at the FATHEAD company. They completely screwed up my last order. I thought I was getting a bigger than life wall image of my favorite Desperate Housewife hottie… well apparently there is a GUY named Evan Longoria. Who the hell knew that? If you are a DevilRays fan, I can make you a good deal.

I've been busy gathering the right wood for the drawer fronts, sides and bottoms. Drawer fronts will be Sapele, a fine-grained wood in the mahogany family. As part of the drawer front fitting, I cut the fronts oversize in thickness, width and length and then proceed to shoot the ends so they fit the drawer opening just right. I follow the same process with the width of the drawer front, handplaning and tuning it down to size. Prior to this, I had planed the thickness of the drawer fronts to fit the opening. The drawer front of the upper right hand set will overhang the divider providing a seamless look, I designed the divider to be shorter than the drawer opening by the thickness of a drawer front. Next, I begin dovetailing the drawer sides into the fronts and then create the grooves for the drawer bottom, in this order. Important to position the groove correctly over a tail so the groove doesn't exit through a pin in the drawer front. This would preclude using a stopped rabbet instead of a through rabbet.

I'm glad to have completed the stand as the cabinet has been occupying a cool rolling cart I built a few months ago. I now have access to my rolling cart once again, which by the way I'm kicking myself for not having made earlier. These things are great in the shop, allowing me to wheel components around to different benches and assembly tables, etc. Also, I haven't decided on the drawer pulls just yet, preferring to wait a few more days and examine some options in the meantime.

I'm also going to install a short divider between the sets of drawers creating more of a delineation between the left and right sides of the cabinet interior. The area above each of the drawer compartments is to be used to display an art object , the divider perhaps will separate the styles of art objects? It just feels right.

I'm still not sure how to work the area below the left hand drawer compartment into the mix. The design of this has been up in the air for a while, and I'm thinking once the drawers are in along with the divider it will make more sense and a a spark of imagination will occur, an "aha" moment. I'm leaning towards a hidden compartment at the moment. Or I might leave it open, in the spirit of "dynamic design", a philosophy I coined a few months ago.

Perhaps you have seen my Chistmas round up of new tools for Furniture & Cabinetmaking magazine, Issue 135?

I made a grave mistake by ...

‘Twas only a kit of carpenter’s tools
We were chancing off that night.

The man who owned the tools was there
A carpenter whose hair was white.
To draw the stubs until the winning share
Would place the tools within another’s care.

Aye! Only a kit of tools you say
Objects of metal hard and bright.
No! We chanced off something else that day
Something that didn’t seem just right.

All the labor of yesteryear.
Homes that they built for those in the past
Of service come to an end at last.
Leaving his heart, his head, his hand

In a chest of tools, this white-haired man.
To end his days in a home for them
Whose years of service were at an end.
The sad look on that aged face

As each number shortened the space.
Of time when he must bid farewell for good
To old friends of his, of metal and wood.
He had used them for years, they were always there.

‘Twas awfully sad, the whole affair.
Like playing pitch with an old man’s soul.
Pushing him on to the final goal.

Into the sidelines and out of the race
While a younger man takes up his place.

The tools of his trade, the hammer and saw
It struck me with wonder and something of awe.
As we laughingly shout and loudly cry
To see who the winning share did buy.

How stupid of us, we were such fools
To think we were chancing off
Only CARPENTER’S TOOLS

      —Julius Frerich

_________________________________
Originally appeared in Carpenter Magazine many years ago. It’s a monthly publication published by the United Brotherhood of Carpenters and Joiners of America. It contains articles on labor issues, lessons on how to build things, and “human interest items” submitted by the local union secretaries.

Bob Smalser kindly posted this over on WoodNet and I thought it was good enough to share.

If you’ve checked out a copy of Woodsmith or ShopNotes in the last couple of years, you may have noticed that articles about hand planes and their use have been showing up a little more often. That’s mostly because we have an editor who takes an active interest in promoting their usage — Randy Maxey.

Randy will spend an hour during this Woodsmith Woodworking Seminar Podcast to give us his tips for tuning up a hand plane, a very important procedure if you’ve ever tried to use one. As you may know, an out-of-tune plane, with a dull or nicked iron, can be a real pain to use. This seminar is for “users,” not “collectors.”

Be sure to check out the Woodsmith Podcast Store for links to a few products that Randy used during this seminar. There are also links to Seminar Guide at PlansNow.com

One of the "tools" I want to get is a traditional workman's apron. There is a picture over at www.toolemera.com of a traditional woodworker wearing one. You can see it at this page if you scroll down to the picture called "THE WISE CARPENTER AT HIS BENCH."

I really like this apron although it seems that a design that had criss-crossing shoulder straps would be a bit easier on the neck and not as prone to getting the neck strap as sweaty.

If anyone has any suggestions, pictures, patterns or ideas, I would really appreciate them. Basically, I am looking for something somewhat traditional and lightweight. A pocket for a pencil or small square would be fine, but I don't plan on carrying my toolbox in it.  read more »

She was short. It was 1996, and I still remember holding her in the Steak ‘n Shake parking lot and telling her that I wouldn’t be gone long. I was only moving to Michigan for 6 months at the most and I would come back to Indianapolis.

I just had to take the job up north to increase my salary and responsibilities before I could come back to Indianapolis as a “player.”

I believe our relationship was officially dead about two weeks later.

Then, I met Gail who had spent nearly her entire life in Holland, Michigan, and as the weather warmed and the frozen waves melted to reveal the beautiful white sand beaches of Lake Michigan, I fell in love not only with Gail but with this cute little town that cheers its Dutch Heritage.

Gail let me know from the moment I proposed to her that she would follow me anywhere in the world. (She apparently sees something in me that the vast majority of women never did…). Gail’s chance to follow through on that promise is just days away.

This weekend Gail and I are heading up to Traverse City for our annual color tour with the West Michigan section of the Mercedes Benz Club of America. We’ll scoot out of there on Sunday morning so we can make it back to Holland in time to watch the Colts play. Then, when the game is over, I’ll jump back in the car to complete the plan I started twelve and half years ago. To quote Tito, Jermaine, Jackie, Marlon, and Michael….”I’m going back to Indiana.”

On Monday morning, I officially exit the auto industry and jump into the most exciting challenge of my adult life. On Monday morning, I’ll wake up in Indianapolis and drive to my first day with what can likely be the last company I’ll ever work for.

There are lots of things to worry about. I don’t mean the part about finding a new house or debating with the movers just how big a jointer has to be before it becomes “excessive.” No, being me, my worries now shift to what to listen to while driving to that first day at my new office…

As Bernie Casey’s character John Slade said while takin’ it to The Man in I’m Gonna Git You Sucka, “This is my theme music. Every good hero should have some.” So it’s important that I roll into my new place on Monday with just the right riff pulsating through the woofers and tweeters.

Right now I am leaning toward EWF. Even in the 21st Century, nothing backs up a hero like Earth, Wind, and Fire. However, I still cannot decide whether I want to set the tone for my career move with September, Let’s Groove Tonight, Got To Get You Into My Life, or Shining Star…. I have 3 days to decide.


FYI… just in case someone thinks I am kidding about this whole theme music thing…. feel free to verify with Gail what happened when I dropped her off for her class at church last night….

Imagine a silver Mercedes roadster with Earth, Wind, and Fire at 120 dB in a four wheel drift as it turns onto the church driveway at about 70 miles per hour…..

Baa Dee Yaa
Say do you remember
Baa Dee Yaa
Dancing in September...


That’s how I roll. And the scary part is… they want ME to be their latex salesman.

I finished this pen last night. It's the second one I'm donating to my daughter's school for a fundraiser. I'm pretty happy with how this style came out. I was a little afraid that it might be boring with only two different types of wood (jatoba and maple), but I think it does work.

The cigar style pen seems to work well for the segmentation as well. I'm a little disappointed it's being given away!


This pen has over 200 individual pieces used in the segmenting.

The November 2008 Newsletter has been Posted. Go to Club Menu and click on Newsletter.

You can sharpen your woodworking skills with helpful tips and techniques from the editors of Woodsmith and ShopNotes magazines. Get a FREE tip sent to your email address each week! Go to WoodworkingTips.com and sign up today.

Here’s last week’s tip from ShopNotes online editor Phil Huber:

When gluing and clamping small parts together, it’s always a challenge to align large clamps to hold them in place as the glue dries. To make this job easier, I built the small parts clamp you see in the photo above.

The base is two pieces of ¾″ plywood glued together and trimmed to size. Two grooves in the base hold a pair of T-tracks, as shown in the drawing below.

Next, two pieces of hardwood serve as the stop block and clamping block. They are drilled to hold flange bolts and two sections of threaded rod, as the illustration shows below.

Place a T-nut in each hole at the back edge of the stop block, slide a threaded rod through the holes in both of the blocks, and then screw them into the T-nuts, like you see in the side view below right. A little epoxy at the end of the rod will keep it from turning. Next, slide the four flange bolts in the T-track, slip the blocks over the bolts and add the washers and wing nuts. Finally, add the washers and thread the knobs on the rod.

To use the clamp, loosen the wing nuts and place the parts to be clamped between the blocks. Position the front of the clamping block to extend slightly beyond the edge of the base so you can turn the knobs and secure the stop block in place. Finally, snug up the star knobs and tighten the wing nuts to lock the clamping block in place.

Good Woodworking,

Phil Huber

Online Editor, ShopNotes

Send for a preview issue of ShopNotes magazine

Three people at "the real job" have requested a set of Adirondack chairs. I'd also like a couple more for my own yard. To get everything ready,I've been working through a pile of rough pine my brother-in-law had given me. One set of chairs need to be done by Friday. Thankfully the person that wants these doesn't want me to finish/paint them. That is going to save me some time, and quite frankly if she had wanted them painted they would not be done in time. I do need to add little cup holder divets to the arms rests, but that shouldn't take to long.


One of the sets of chairs I made a while back had an unfortunate encounter with a puppy that liked to chew things. I'm going to make a replacement set of arms because it drives me crazy knowing that my chairs look ugly! I've seen them too, that dang dog did a heck of a job.

Hi Folks
Well - that's that. I've finished in the workshop and put the bench in the back of the van ready for the journey to Westonbirt tomorrow. I've just about finished all the planes I was hoping to make and I'm sat at the computer now printing out signs and labels. The rain is falling outside (obviously having a last go before the coming heatwave...........) but I'm not worried. I know its going to be a great weekend :)
I've made a couple of planes from some Indonesian Rosewood I've been hoarding. One is the pretty little smoother I showed off yesterday - the other is a monster Miter plane. She looks just awesome! If anyone is interested they'll be on my bench this coming weekend :)

Shock of the day was the Wife coming out to the workshop with the phone. "It's Konrad", she says. My jaw drops - not Konrad Sauer??
Oh, yes - a quick call before he heads to the airport to make his way over. It was great to have a quick chat (and also to find I'm not the only one feverishly packing bags!) and I'm really looking forward to spending a few days in his company. Did I mention Konrad and I will have our benches set up next to each other (along with Infill maker Bill Carter!) in the Classic Hand Tools marquee?
So make sure you head over to Westonbirt this weekend for the "Festival of the Tree" - you won't be disappointed!
Cheers
Philly

Hi Folks
Right - I promised some pictures.
This is the prototype of my shoulder plane design. It's made from Rosewood and brass, with the sole fixed to the body with a sliding dovetail. In use the plane is very comfortable and has a good weight to it - I'm very pleased!
I am about to make two more, one 3/4 inch wide in African Blackwood , the other 1 1/4 wide in Pau Rosa. They should be ready by the end of the week, and I hope to take them to Kentucky with me to get some feedback on the design.
Back to the workshop......
Philly

Trend doesn't seem to sell this any more. It's the "RoutaSketch" and I picked one up on clearance at Rockler for $25.

It was when they had the coupons 50% off any clearance item. They had two of these RoutaSketches, original price $99, clearance price $50, with my coupon $25.

I figured for $25 it was worth checking out. I was intrigued by the concept, that's for sure.

Inboxed, it's clear the thing was made as cheaply as possible. All plastic except for a pair of brass thread inserts in the base and the steel bars to hold up the template and the tracing stylus.

I assembled according to the directions. The steel bars were a REALLY tight fit in the plastic bases. Tight enough I feared I'd break the plastic before even getting to try it. But they survived. The plastic may be tougher than I initially thought!

After assembling the stands I looked at the instructions to determine which holes in the base to use for my Porter Cable router. But, alas, there were no PCs listed in the table!

No Porter Cable support? How can this be?!?!?!

I suspect that maybe PC isn't as big in Europe as it is here in the US. Trend seems to be based in the UK. That might explain it.

I tried to line up the holes in my PC with the myriad holes in the base of the Routa Sketch. No luck. None at all. Bleh.

I decided to grab the Harbor Freight plunge router that's been pretty much setting on the shelf. Sure enough, the template holder screws were a match. In fact, Trend was nice enough to include long screws that fit! A good thing since the ones that came with the router were far too short to mount the RoutaSketch base with.

After some dry runs making sure I had the motions down and was comfortable controlling the router with this big thing attached (really it isn't that bad, things moved quite smoothly) I picked one of the designs that came with the RoutaSketch.

The RoutaSketch comes with a good assortment of line art to use. Oddly enough (or maybe not), at least a few of those are public domain line art. My wife saw one of them at the local library for the kiddies to color!

With the paper on the tracing platform, my plunge router dialed in to make a very light cut, and my daughter and I wearing goggles, I started cutting.

The reason I wanted to use the PC router is I hate plunge routers. I understand the need for them, which is why I own one, but I prefer a straightforward simple router without the plunge feature. During this trial, the biggest reason I hate plunge routers showed itself. If I concentrate on the work, I'll relax my arms, causing the router to "de-plunge". The router keeps making the right motions, but the bit is no longer cutting. Grr...

Another thing that was irritating me was the stylus would grab the paper causing the paper to move. Well this screws up the pattern being cut into the wood. It turns out that the package came with a sheet of acetate to lay over the paper so the stylus moves more smoothly.

Whoops!

Even so, I thought it came out pretty decent!

I just carved into the mini-bench top. Don't worry, I'm not damaging my work surface. I had enough damage to it already that I need to resurface it with my jack plane.

I didn't carve any of the details. This was more a test of the tool. It's not a project. The outline looks good, but you can see where the aper shifted. it shoved the sea horse's forehead into it's ears. The acetate should prevent that from happening next time.

Yes. There is going to be a next time...

Here’s something you’ll want to put on your calendar. PBS will be airing a show entitled, “Craft in America: A Journey to the Artists, Origins, and Techniques of American Craft.” It will air in three episodes beginning on May 30. The most notable artist to be featured—as far as woodworkers are concerned—is Sam Maloof. You can see a list of other artists to be featured here. The web site has a cool virtual exhibit that will show you some of the work of the artisans.

To find out when Craft in America airs in your local area, click here.