If you find there is any copyright abuse, contact us as soon as possible, thanks.
Women's Woodworking Club
04/16/2008, 02:38 | The Village CarpenterMost of these women are brand new to woodworking?some are retired, with grown children?and all are enthusiastic to learn. The enthusiasm can be gauged in the sheer volume of exhuberant chatter that goes on during our meetings.
Regarding woodworking (and probably most things), all that women seem to need is a little encouragement & patience, and they will dive right in. Tonight, we worked on part 2 of our current project?cutting boards?in the Woodcraft Store shop where we meet. During the course of the 3-
part project, they are learning how to use the jointer, planer, and miter saw. Next time, we'll have a router workshop, when we'll round over all the cutting boards and test drive different types of routers and bits.We decide at each meeting, as a group, what the next topic will be. There are no dues, no officers, no business to attend to. We sit at a table, facing one another. All of the women have ownership. It's very different from what I call the "boys' club"?the other woodworking club to which I belong. Up until last year, I was the only female member.
In the boys' club, the guys seem to prefer hierarchy and structured meetings. We have officers, dues, and an annual business meeting. There are too many guys in that club (and too small a space) to do much hands-on stuff, so we mainly have a demo or lecture. Members sit in rows of chairs and face the presenter. The volume of these meetings is also different. Pretty quiet, except for the speaker, and the occasional wisecrack. The guys chat with one another prior to and after the meeting, but not so much during.
The other very important difference in the two clubs: the women's club usually has snacks. This past year in the boys' club, when the Christmas party was discussed, the guys opted to not have one. Conversely, the women all but leapt out of their seats with a resounding "YES!" when I asked if we wanted to have a club Christmas dinner.
And you wouldn't believe what they brought. Crab cakes, homemade lasagna, homemade meatballs (made by one woman's husband, which cracked us up), salads, and desserts like you'd find at Wegman's.
It's great fun to be an observer in both clubs. Despite their differences, there is one common thread between the two clubs: they both consist of people who want to create something?something useful, something artistic, something challenging. Something that will leave a lasting mark.
Making a strong Hook, Bent or Crooked knife.
07/25/2006, 22:12 | Traditional Tools & NewsWood Turning Saturday May 31st at Highland Woodworking
00/00/0000, 00:00 | Highland Woodworking Blog
Saturday Mornings at Highland complement our woodworking class & seminar offerings. Join us at our store in Virginia-Highlands on Saturday mornings at 10am EST for FREE, live demonstrations featuring a wide variety of woodworking skills, tools & techniques. These 1 to 1-1/2 hour-long demonstrations feature our knowledgeable staff and instructors, local clubs & guilds, guest authors, and others. Upcoming events include woodturning, woodcarving, care & use of hand tools, joinery, book signings, an introduction to woodworking design software, and much, much more.
Saturday, May 31, at 10:00am we are pleased to have Hal Simmons in the house teaching the Natural Edged Bowl. When he's not busy at the American Red Cross, he's teaching wood turning. He has studied with Nick Cook, Willard Baxter, David Ellsworth, Johannes Rieber, Chris Scott, Soren Berger and Ray Key. He enjoys traditional spindle, bowl, and hollow form turning using both exotic and domestic woods. Hal is President of the Chattahoochee Woodturners and member of the Georgia Association of Woodturners.
Hal will demonstrate how to turn a natural edge bowl. He will talk about consistency in wall thickness, chucking and mounting the piece on the lathe.
All demonstrations take place in Highland Woodworking's retail store in Atlanta, Georgia and begin at 10:00am EST.
Flush Cut Shield
03/28/2008, 15:17 | WoodworkingONLINE.comYou can sharpen your woodworking skills with helpful tips and techniques from the editors of Woodsmith and ShopNotes magazines. Get a FREE tips sent to your email address each week! Got to Woodworking Tips.com and sign up today.
Here?s last week?s tip from Woodsmith online editor Ted Raife:
Whenever I use screws to assemble a project, I hide them under wood plugs. Cutting the plugs and gluing them in place is the easy part of the job. The bigger challenge comes once the glue dries ? trimming the plugs flush to the surface.
For me, this is a two-step process. First, I use a small back saw to trim off the bulk of the protruding plug. Then I sand or plane the remaining portion flush to the surface. But my lack of care with the back saw often led to problems. If I tried to cut the plug too close, I would scratch or gouge the surface, making more work for myself.
But as is usually the case, a small problem had a simple solution. I dug up a scrap of plastic laminate and made a flush cut shield. The laminate shield has a hole drilled through it slightly larger than the diameter of the plugs. You place the shield over the plug flush to the surface and then saw away without worry (Figure 1). The thin shield allows you to give the plug a very close trim and all that?s needed to finish the job is a little sanding (Figure 2).
Good Woodworking,
Ted Raife
Online Editor, Woodsmith
Edge Planing Experiment
00/00/0000, 00:00 | David's blogTake 10 full length, reasonably ...
When opposites attract Wooden Rings
00/00/0000, 00:00 | Wood Rings by Simply Wood Rings
I have made this set of wooden rings for that couple that are opposites but share a bond that they lone understand.
See my work on my http://www.simplywoodrings.com
Band Clamp Corner Protection
05/13/2008, 16:02 | WoodworkingONLINE.comYou can sharpen your woodworking skills with helpful tips and techniques from the editors of Woodsmith and ShopNotes magazines. Get a FREE tips sent to your email address each week! Got to Woodworking Tips.com and sign up today.
Here?s last week?s tip from Woodsmith online editor Ted Raife:
When gluing up a mitered assembly, I often rely on band clamps to pull the joints together. They?re easy to apply and provide the even clamping pressure needed to keep things square.
The only catch is that the sharp mitered corners of the assembly have to be protected from the pressure exerted by the band. My clamps came with metal corners meant for this purpose, but they often damage the corners they?re supposed to protect.
My simple solution was to substitute more forgiving, corrugated cardboard pads for the hard metal corners, as shown at right. The cardboard pads provide plenty of protection without leaving any unwanted evidence of their use.
Good Woodworking,
Ted Raife
Online Editor, Woodsmith
Deluxe Pyrex 10-pc. Storage Set
00/00/0000, 00:00 | Furniture Craft
- Refrigerator, oven and microwave safe10-pc. set
- 10-pc. set
- Vented plastic covers
- BUY NOW
A Knife That Never Needs Sharpening? We’ll See!
00/00/0000, 00:00 | Woodworking blog Woodworking Magazine
When I first opened the package, I assumed that the tool inside was a prototype that
had a plastic blade. That happens occasionally here at the magazine when a manufacturer
wants our opinion on a tool’s ergonomics before they crank up production.
But no, the white chunk of stuff at the end of the Gladstone
Tools marking knife actually was the working blade. And this was no prototype.
The spear point of this 8”-long knife is ceramic. Ceramax 80, to be precise, a material
you can find in a variety of industrial and home applications, including some kitchen
knives.
According to the manufacturer, the knife is second in hardness only to diamond and
“will never need sharpening.”
That is quite a claim, and so I immediately put the knife to work today to see how
it performed. The ceramic blade is a spear-point shape that is about 1/8” thick. It
has the same general shape as the now-discontinued Veritas marking knife we reviewed
a few years ago.
The knife’s edges don’t feel as keen as a freshly sharpened steel knife, but the tool
does lay down a fine line with little effort. It also offers the same feedback to
the user as a steel knife as it makes its mark. I thought the Gladstone might feel
a bit gummy (like a stainless tool), but perhaps I was just getting over the shock
that it wasn’t a chunk of white plastic.
The handle that was shipped to me is not the same shape as shown on the Gladstone
Tools web site. This knife has two pronounced flats that prevent the tool from rolling
on the bench (always nice) and has a thin neck for your middle finger while marking
joints.
The padouk handle (it’s also available in zebrawood) is well finished. It’s not as
nicely turned and finished as the Blue Spruce knives, but it is nicer than most manufactured
knives I’ve used. The price is $29.95 for the padouk and $31.95 for the zebrawood
– those are fair prices for a nice piece of work like this.
Will the edge hold up? I sure hope so. Gladstone Tools is run by a man that many of
us simply know as “Manny,” who runs Manny’s
Woodworkers Place in Lexington, Ky. When I was first taking woodworking classes,
I and my fellow students would hang out at Manny’s place and drool over the amazing
selection of books (still the best, even today) and hand tools. Manny was always patient
with us as we would fondle the Japanese chisels but purchase a small set of brad points.
Though Manny carried a few machines and power tools, the majority of his inventory
has always been hand tools, including many hard-to-find things. When I first started
woodworking seriously, it was Manny’s place that made a huge impression on me. I thought
all furniture making used both hand and power tools. (A rude awakening was to follow.)
If you purchase this knife, add a comment below after you use it for a while and let
me know how it held up. I’ll use it exclusively for a while and report back as well.
If Manny has come up with a way to ensure that I have one less tool to sharpen, that’s
a pretty amazing accomplishment.
— Christopher Schwarz
Round Over Edges for the Tensioner
12/15/2007, 20:55 | A Woodworking Odyssey
I learned the basics of using Follow Me in Sketchup, and it solves the problem of creating round overs on the tensioner plan I've been struggling with. Now that I know how to use this tool, it's fairly easy. This task that has occupied at least 5 hours of my time can now be completed from scratch in under 5 minutes (with several mistakes). Here's how I do it:
- Draw a rectangle 1.5 x 6 inches.
- Using the line tool draw a section 1/2 inch long at the tip.
- Using the line tool draw a section 1 inch long on the right side.
- Draw a line connecting the two sections.
- Delete the resulting triangle.
- Using the Push tool, extrude the shape to 1.5 inches.
- Orient the object so I'm looking right at the square end.
- Using the tape tool, drop a reference line 12.25 inches from each side.
- In the top left corner, use the arc tool to draw an arc that runs between two intersections and tangent to the sides.
- Do the same in the bottom left corner.
- Select Camera, Standard Views, Iso.
- Orbit slightly if necessary to get a good view of the arc and the area it defines.
- Select Tools, Follow Me.
- Click on the small section formed by the arc and the corner.
- Move the cursor to follow the four edges that want a round over and click when they are all defined.
- Select Camera, Standard Views, Bottom.
- Select Camera, Standard Views, Iso.
- Repeat steps 13 ? 15 for the bottom.
- Select Tools, Dimensions.
- Add dimensions as needed.
New Website Design
00/00/0000, 00:00 | David's blogThis is very exciting as it coincides ...
For This I Get Paid? Part 4
00/00/0000, 00:00 | Popular Woodworking
Today, Phil Lowe set up a jig to waste out the front side of the bridle joint that
the leg sleeves over in our demilune tables, and a niggling thought crept in to my
head. Did I really keep the screws out of the leg locations when bricking the rim?
I think I did, but… The last thing I wanted to do was hit a screw and set off the
Saw Stop. For one thing, the Marc Adams School of Woodworking has only the one dado
stack at the moment, and I didn’t want to keep anyone else in the class from getting
their work accomplished. And it would be really embarrassing.
Just in case, I moved to the end of the line. I figured if I did set it off, I could
handle the embarrassment – as long as I didn’t hold anyone else up. But as I waited,
I decided I’d best chop out the waste by hand. The longer I stood there, the more
I convinced myself that I’d misplaced a screw. But my handsaw skills are, shall we
say, in the developmental stage. So at Phil’s suggestion, I clamped a guide block
along my scribed line, and kept the saw blade pressed flat to that "training wheel"
as I cut down to the shoulders at each location. Then I chiseled out the waste and
flattened the bottom with a shoulder plane. Of course, there was nary a screw in sight.
This was the first time I’d used a chisel for precision work other than dovetails.
Dovetails are small. This joint is not. I’ve struggled with getting things flat and
even, and squaring the shoulders (among other things). Phil makes it look so easy.
I knew coming into this class that I was jumping into the deep end. In theory, I know
why the blade is cambered in a smooth plane, and how to use that plane. I’ve read
reams on how to hold and use a handsaw. I’ve watched editor Christopher Schwarz demonstrate
plane us, and the three classes of saw cuts – more than once. (Chris makes it look
easy, too). Heck – Chris has even stuck a plane in my hand and given me a lesson on
its use. But I didn’t pick up the plane again until this class. Using these tools
with purpose is very different than reading about it, watching someone do it, or taking
a few desultory swipes at a board – no matter how good the instructor. Use it or lose
it.
My table might approach mediocrity. My cuts aren’t great, my tenons are loose, and
I got so excited about my plane shavings that I was overzealous – the ankles on my
tapered table legs are very delicate indeed. But it will be the best darn demilune
table I’ve ever built. The next one will be even better – and will use no screws at
all.
— Megan Fitzpatrick
Read Part 1 of this series here. And Part
2 is here. Part 3 is here.
Doweling...
00/00/0000, 00:00 | The Refined EdgeInstead, I make a doweling guide which is simply a block of wood with the exact dimensions , thickness and length of each of the side panels. The concept is to use the guide to create mating dowel holes in the ends of the panels. I use standard size fluted dowels and have pre-measured and carefully oriented each of the side panels to its corresponding top and bottom panel. In the photo, I am aligning the doweling guide on one of the side panels. I since removed and bored two other holes in this particular guide for a total of ten dowel holes. Also in the photo, the face of the side panel is displayed, the back of this panel has a rabbet running lengthwise at the left hand side. The first dowel hole from the left is offset to accommodate this.
As I continue with this boring process ( no pun intended) there are eventually a total of 80 holes bored into the ends of each of the panels. A stop is used to bore to the correct depth to accommodate standard size dowels. Afterwards, each of the bored holes is checked with the depth gauge of a caliper and install the dowels, first on the side panels, then these panels to the top and bottom panels. Some test fitting, and the glue up begins...
Short Course Dates
00/00/0000, 00:00 | David's blogWe are reserving certain weeks for people who ...
ICFF - Aimee Less Interview02
00/00/0000, 00:00 | Furnitology ProductionsAimee less is a designer living in California. Her interview provides nuggets of information on design thought specific to her shell chair...The Derby.
Enjoy this interview on seating from the International Contemporary Furniture Fair.
Ă‚
Sugar cane cart
00/00/0000, 00:00 | UnpluggedShop.comFor those of you who didn't know, I am an American living with my wife and kids in the Caribbean in the Dominican Republic. I am working as a Baptist missionary planting a church in Santo Domingo.
Last week, we went to a beach town called Juan Dolio. It is located an hour or so east of the capital, Santo Domingo, and is a fairly popular tourist destination.
Around the area, there are a number of bateys, or sugar cane fields. Even today a lot of the cane is cut by hand by Haitian immigrant workers. One of the problems with sugar cane is that it is an extremely bulky material to handle.
I haven't been to any of the bateys when they were harvesting for several years, so I don't really know how they are doing it now, but carts like this one were used to haul the cane out of the fields to a light railroad or trucks or directly to a mill where it would be ground into something more manageable. read more »
History Of Traditional Kudus House
06/26/2007, 11:15 | Antique Knockdown Carved Wood House Kudus is a city in the Central Java, Indonesia, located among Jepara, Demak, Pati, and Purwodadi districts and in the route of Semarang the capital city of Central Java to Surabaya (please see location map). Based on story, Kudus name was from Al-Quds, which mean holy.
Traditional house of Kudus if notice deeply is more and more fabulous since its uniqueness and attractiveness in exterior and interior which full with ornamen that made by highest skill woodcarving artist. Foundation of the existancy of the traditional house of Kudus was full with taste and creation that fashioned in the beautiful forms without broken any religion values. Through the activity of art, there is possibility of adding the atmosphere of the deepest metaphysic reality.
Episode 85 - Ask the Masters 14
00/00/0000, 00:00 | T Chisel - The Rough Cut Show!Designer Wine Rack/Side Table with Wood Top in Scroll Style Structure
00/00/0000, 00:00 | Furniture Craft
- Designer Wine Rack w/Wood Top in Scroll Style Structure
- Dining and Kitchen
- 0-2 Days for processing, and ships in 3 day(s) via Ground Shipping.
- Dining and Kitchen - Wine Racks
- v167d-2591
- BUY NOW
USA trip
00/00/0000, 00:00 | David's blogWe are filming a DVD on ...
My First Handtool Project!
00/00/0000, 00:00 | Wood Destruction by a Woodscrub
I'd been playing around with my Stanley Bailey #5 plane but never really did anything with it. Power tools are so convenient there was no real "need" to use anything else.
Last weekend I decided I needed a small assembly/finishing table made from a spare kitchen cabinet I had. I used scrap 2" thick pine from other projects to make the top. I used the jointer on the edges, glued 'em up, then looked at it closely. The wood was all different thicknesses (from different sources), and needed flattening. I initially reached for my belt sander then realized this was an ideal time to try hand tools on a real project.
I sharpened the blade on my #5 and went to town. The process was actually really fast, only taking an hour or so to level the top. Which was good because my shoulders couldn't have taken much more, heh. The pile of curly shavings around my feet was substantial! But nothing was in the air as with a sander, and I was able to work when the family was asleep upstairs.
The first few minutes was spent tweaking the blade to get a smooth cut without leaving gouges in the wood. Easily done, and no other issues except those ugly knots you see in the photos. They were brutal when planing into them. I had to move *very* slowly when I got to them which killed the groove I was in each time I got to one. But even the knots succumbed eventually!

I cleaned up the tool marks (mostly) with a card scraper. That tool I use frequently, so it only took a couple minutes to get the surface smooth to the touch.
I love working with the plane, and will be looking for more planes so I can do more without power tools.
Episode 76 - Ask the Masters 08
00/00/0000, 00:00 | T Chisel - The Rough Cut Show!Invisible Finish Repair
04/25/2008, 20:54 | WoodworkingONLINE.com
You can sharpen your woodworking skills with helpful tips and techniques from the editors of Woodsmith and ShopNotes magazines. Get a FREE tips sent to your email address each week! Got to Woodworking Tips.com and sign up today.
Here?s last week?s tip from Woodsmith online editor Ted Raife:
It always breaks my heart when a project gets its first scratch. But I know that even with the best of care, it?s bound to happen. So rather than stew over a minor blemish, I came up with an easy way to make it disappear.
My repair system started with an investment in an assortment of touch-up markers. You can get these from many woodworking and finishing supply companies. My set includes about a dozen different colors and this gives me a good shot at finding a close match to the project. But the trick is finding the best color match without relying on a lucky guess.
To help make a more informed choice, I created a sample sheet on a piece of clear acetate. The sheet contains a small, labeled swatch from each marker. As you see in the photo, I simply hold the sheet up to the project to find a good match. After choosing a marker and performing a quick touchup, the project looks as good as new and I feel a whole lot better.
Good Woodworking,
Ted Raife
Online Editor, Woodsmith
The Odyssey
00/00/0000, 00:00 | Skiving OffI wasn't even in my shop when I realized I was in this spot of bother. I was at my desk at work.
It was the space bar that got me.
As my right thumb hit the space bar the electrical grid of my body communicated that something was rotten in the state of Thumbsville. Yep....little splinter in my big right thumb.
I don't think I visited the shop yesterday morning so somehow a sliver of cherry had spent the night with me, living just under the surface of my thumb.
Normally, Gail is my splinter removal girl. However, less than 24 hours before this she had flown to San Francisco to visit her baby sister. It is interesting, because in our 12 years together this is the first time we have been apart for any reason other than my business travel. In other words, although we’ve spent weeks apart with my travels to Viet Nam, China, Hong Kong, Germany, Spain, Belgium, France, The Netherlands, Canada, and all over the States….July of 2008 will mark the first time I’ve spent a night alone in my own house. Of course I have Peyton.
So, staring at the splinter yesterday, and realizing Gail is gone, I considered options. Gail's middle sister is a nurse with keen eyesight, but she was leaving for San Francisco that very day to join up with her two sisters. Calling her was not an option.
I thought of calling on one of my friends in the office. Except I've been married so long I think I forgot how to "hook up" with a new woman....even for splinter removal. Am I supposed to take in the results of my most recent blood test. Even then, how does the conversation begin? "Excuse me , Gladys, I know you successfully raised children, so I know you've done this before...would you mind going after some wood I have here for you????" (Wow...that would have landed me in HR... PDQ.)
So I decided I was own my own. Naturally, the situation followed the Right Hand Rule. I remember learning about this in Calculus. It means if you are right handed, you will always have to do one handed tasks with the left hand, and vice versa. My tool of choice was a thumbtack/pushpin. As I took that pushpin between my left thumb and forefinger I thought of an interesting paradox:
I'd give my left arm to be ambidextrous....
Like General Eisenhower who signaled the go ahead for Operation Overlord, fully realizing that this necessary step would still require the death and destruction of many Allied forces, I plunged the pushpin into my own Omaha Beach...my right thumb. I dug, I pried, I levered, I cried. The tears served as little magnifying glasses that easily improved my vision ten fold.
At times I pushed it deeper. At one point the delivery turned breech. Still, through the agonizing pain, I continued the pushpin torture. Suddenly, like a prairie dog in the desert or a Whack-a-Mole at Chuck E Cheese....a tiny portion of the splinter popped up. Because I am a committed nail biter, I didn't have the option of pulling it out with finger nails. My choice was to scrape and pray.
I scraped the pushpin against the side of the splinter fully expecting to see it shear off like a whisker in the graphics from a Gillette commercial. Yet, to my great joy, it did indeed pull the splinter fully out of my body.
I looked at that splinter laying on my desk in its own little biohazard containment area. And I was left wondering, "How do single guys deal with splinters?" Then the flood of memories came into my head of the woodworking adventures Gail has shared with me. They all came back...the wound scrubbing...the bandaging...the drives to the Emergency Room... scrubbing the shop floor with bleach...Gail has been an integral part of my woodworking.
So until she returns I am left with the dilemma...
Time in the shop is the perfect way to pass the time while I am alone. Yet being alone subjects my tender body to injuries that may require the assistance of trained professionals.
Finally, the solution came to me.
The Life Alert system (I've fallen and I can't get up) is on its way and will arrive tomorrow. Soon I will be able to maintain my shop independence and can stave off the attempts of those who believe I should move my work to a Group Shop.
Thank you, Life Alert.
Scilly time again (Holiday)
00/00/0000, 00:00 | David's blogTheresa will be manning office, Monday, Wednesday and Friday afternoons, approximately 2.45 - 3-45.
Short ...
Jamestown and Bideford
00/00/0000, 00:00 | David's blogSelecting wood for the interior...
00/00/0000, 00:00 | The Refined Edgedrawer case mockups. With these measurements in hand, I then create a cut list. The cut list provides me a clear idea of the amount of wood necessary to make both the drawer cases. The cut list also allows me to optimize the individual components for the drawer cases in order to minimize the wood necessary. This is only valid to a point however, as the wood components need to be selected with careful consideration to grain orientation and to maintain the harmony of the individual drawer cases.
With this information in hand, I selected an area of a large beech plank to cut my blanks from. Fortunately, I have some very nice European Beech planks in my studio I had acquired a while ago. The planks are rift to quarter-sawn in grain orientation and fairly thick at approximately 2.5 inches. The blanks are slightly different in size and are rift-sawn. The difference in blank size is attributed to the different size of either of the drawer cases. In the photo above, the two blanks can be seen along with my measurements and cut list. I also drew the components of the drawer cases out on another sheet of cardboard as a visual aid in laying out the components. Since the depth of the drawer cases is fairly large, I will be gluing two pieces of beech for each of the tops, bottoms and sides of the drawer cases. In doing this, I will try to maintain grain orientation and harmony to create fairly seamless components for the drawer cases.
Next I will layout and mark the boards to be cut from both of these beech blanks. After cutting the blanks in half and squaring one face and one edge of the individual halves , I will slice the boards off using a bandsaw similar to resawing.


