I had some spare time recently while waiting for finish to dry and thought I would experiment with some inlay techniques. I have always found a piece of inlay with a surrounding border to be fascinating to be able to make. I need to confess, I've done this before although quite a while ago and need the practice. What I had in mind is a fair sized yellowheart diamond with a black border, I used blackwood. I have the inlay set in a lighter wood, nothing special, just a small offcut. The process of creating and inserting the inlay is a very good test of patience and fine hand tool skills , for almost everything here is accomplished with hand tools.

The border itself is bandsawn from a larger piece of blackwood and the yellowheart also bandsawn from a solid block. The yellowheart inlay is first drawn out and cut with careful attention to the shape of the diamond, each of the sides and facets needs to be a mirror image of the other side. I then mark the inlay onto the lighter background wood with an allowance or margin for the surrounding border. Once marked with a fine knife, I then remove or carve out the recess for both the diamond and border. Next step is to fit both the yellowheart inlay and blackwood border into the recess with glue , make sure it is well seated and wait for everything to set. Afterwards, I judiciously handplane the inlay and the result is in the photo at top. I find it great therapy to go off and do some other type of woodworking during or after some intensive furniture making, it clears the mind and the instant results can be very gratifying, the practice also keeps the skill retention up...

I saw this and had to mention it here, if for no other reason than to have a record for myself of it so I can refer to the links... On the WoodCentral handtools forum Joel Moskowitz (of Tools for Working Wood) posted a link to a book archived on Google Books titled “The London Chair-Makers and Carvers' Book of Prices for Workmanship� which was originally published in 1829. Later, he also put up a link to another book archived on Google Books titled “The Cabinet Makers London Book of Prices and Designs of Cabinet Work� published in 1803. These books are fascinating reads if you are at all interested in period woodworking of any kind – and the thread on WoodCentral is a great read as well..

read more

You can sharpen your woodworking skills with helpful tips and techniques from the editors of Woodsmith and ShopNotes magazines. Get a FREE tip sent to your email address each week! Go to WoodworkingTips.com and sign up today.

Here’s last week’s tip from ShopNotes online editor Phil Huber:

My workshop shares space with the family car. So it’s important that all of my power tools be portable and take up as little space as possible. So I made the fold-up router table you see here.

I made a simple router table top and attached it to a pair of 2×4’s with screws. Then, after removing the top of an adjustable clamping table, I mounted the router table to the clamping table stand, as shown in the left photo above. The table is firmly supported by the clamping table base.

The nice thing about the table is it can be raised and lowered to match the task at hand. Best of all, I can remove the router and quickly fold the table up to store it against the wall whenever it’s not in use (right photo).

If you’d like to see other router table plans, just go to PlansNOW.

Good Woodworking,

Phil Huber
Online Editor, ShopNotes

Send for a preview issue of ShopNotes magazine

I like to attend woodworking schools. From my very first hands-on classes at the Woodcraft store in Bloomington, Mn., I’ve been hooked on learning from the “masters.”

Paul Sellers is one of those masters. You might remember, he taught a hand tools foundational course that I took a few years ago. And so I was excited to hear that he has founded a new woodworking school in his native England. The New Legacy School of Woodworking is much like the school I attended near Waco, TX at the Homestead Heritage Craft Village. But with a twist. It’s housed in a castle — Penrhyn Castle in North Wales. Penrhyn is one of the many castles being preserved and maintained by the National Trust, with whom Paul has been working for the last year or so.

Paul says that the availability of some really good furniture from Asia has continued to make it difficult to earn a living as a woodworker. But he hopes that schools like his will fill the void left by the decline of apprenticeship programs like the one that helped start his career over 40 years ago in his native England. During his apprenticeship, Paul learned about the proper use of hand tools, still an important part of the trade in England even in the ’60s. That’s the focus of New Legacy and I wish him well.

N.C., Andrew, and Jamie Wyeth's paintings figure prominently in the galleries at the Brandywine River Museum in Chadds Ford, PA.

Photos of the artwork are not permitted, however I was allowed to photograph this elaborately carved coat of arms which originally adorned the pediment of the Dauphin County Court House in Harrisburg—Pennsylvania's capital city.

The carving, created in 1861 by E. Omensetter, was constructed with four horizontal pine boards used as a backing for the pine relief carvings that were attached with nails. Originally painted, the coat of arm's colors were worn away by weather and age.

The state's motto, "Virtue, Liberty, and Independence," is deeply carved into the banner, and the other design elements are also representative of Pennsylvania. The ship symbolizes the state's ports and vast commercial network; the American eagle is the traditional symbol of liberty; the horses protect and honor the motto; the plow represents coal and mineral resources; and the wheat and corn depict Pennsylvania's agriculture.

I love the chunky gouge marks and stylized eagle and horses. The beefiness, the deep shadows, and the folksiness of the design seem to accurately portray PA, which is replete with farmland and steeped in history.

While I enjoyed the Wyeths' and other artists' paintings, I found myself lingering in front of this piece longer than any other.

The second and third pens I've turned. On the left is a "learning experience". It started out as ebony, but I had such trouble turning it I ended up with a huge blowout. I repaired it by cutting off the blown out part and gluing a block of padauk onto the barrel.

It worked OK but I had real issues with the CA glue finish. On the padauk it went wonderfully. On this ebony/padauk pen it bunched and blobbed and did things that didn't happen to me the first time.

Sigh.

For the kingwood pencil, however, I changed my finish. Instead of the CA glue, I used 10 coats of shellac. A 1 lb cut applied to the spinning blanks with an old cotton sock gave an amazing finish. No ridges, no bumps, no blobs, nothing but smooth shine.

The hardware kit is a click pencil in black enamel. I'm curious about the durability of the black finish. I love how it looks right now, so I'm hoping it wears well.

We'll see.

I just picked up some 1/4" (7mm nearly) brass tubes from Hobby Lobby. Two 12" tubes for $3.47. I also picked up some other goodies I'll talk about later.

The tubes are for me to make my own barrels for some existing mechanical pencils I have. Classic Pentel drafting pencils, and some inexpensive all plastic pencils. I'd also like to make replacements for the housings of some of my favorite gel pens. I haven't decided how to do that yet, so stay tuned!

Before visiting the new Gettysburg Visitor Center, I didn't know that General Lee even had a medicine box.

The center's museum houses clothing and war relics from, and features short films about, the American Civil War. The layout is a conglomeration of displays in a dimly-lit maze of walls, media screens, and glass cases. Very atmospheric. You could easily spend hours admiring artifacts and reading and viewing film about the war.

Halfway through the museum I happened upon these unexpected gems—General Lee's medicine box and campaign desk.

The photos are out of focus because all pieces are behind glass and flash is not permitted.

The medicine box, I'm guessing, is about 14" tall,12" wide, and 12" deep, and is filled with little cubbies and tiny drawers. The cubby partitions are only about 3/32" thick. Both sides of the case are removable and were laying beside the cabinet. The front opens like a door and I believe the wood is cherry.

For immediate release

LumberJocks.com Grows to More Than 10,000 Projects; Now Officially the Biggest Online Woodworking Gallery.

September, 29th, 2008 – LumberJocks.com, the largest project based website for woodworkers, today announced that more than 10,000 woodworking projects have been posted to the site.

“We are delighted that our members and viewers are finding LumberJocks.com to be a great place to publish and find woodworking content,� said Martin Sojka, CEO of Lumberjocks.com. “With more than 10,000 projects posted, we know that our members enjoy sharing their talents and showcasing their skills from beginners to professionals. With this rapid growth rate we expect the numbers to rise dramatically over the next quarter.�

The top 5 project contributors received a thank you award for taking the time to share their many wonderful projects. “I know it may only be a small sign of gratitude; however I would like all the contributors to our site to know that showcasing your talents and the helpful and friendly attitude of our members has truly made the site what it is today. I expect our online family of woodworkers and their projects to continue to grow and prosper. I feel that LumberJocks is now the biggest online woodworking gallery.� said Sojka.

LumberJocks.com is quickly becoming the #1 online social network for woodworkers. The site’s structure and growing features allow members to easily connect with other woodworkers, post projects and blogs and compete in friendly competitions for fantastic prizes. Stay tuned for our Winter Awards!

About LumberJocks.com
LumberJocks.com is part of the growing network of online communities hosted by Martin Sojka. The rapidly growing LumberJocks.com is comprised of men, women, children, and youth from around the world who are actively involved in woodworking. The members are a combination of professionals, skilled hobbyists, beginners and everything in between. They are furniture builders, artists, home renovators, and wood explorers.

The woodworkers join LumberJocks.com to share their experiences with wood, ask and answer questions, seek and post their personal tool reviews, find and share resource information, and blog their woodworking journeys.

###

A European company called Miniot
is selling a nice wooden case for iPhones.
They offer a little bit of protection for your
phone and it looks cool. It’s carved from a
single piece of wood and available in oak,
paduak, cherry, mahogany, or walnut. The
price is around $80. If your cell phone is
dinged up half as much as mine is, this
might be a good investment!

Oh by the way, if you don’t have an
iPhone yet, they also make a case for iPods!

Halloween Challenge: LumberJocks | HomeRefurbers | GardenTenders

13 projects have been entered into our Halloween Challenge and I’m very pleased to announce the winners of the prize draw:

1. $50 gift card → Steelmum
2. Leather apron plane holster → mjon
3. Lee Valley cap → jeffthewoodwacker

Congratulations!

———————————————————————————————

Halloween Challenge: LumberJocks | HomeRefurbers | GardenTenders

Time for the fifth and final installment of the Child's Bookcase Project.  In today's episode I demonstrate my finishing technique with Shellac and a few other goodies too.  Of course I can't guarantee you'll learn much about the finishing but you should get a good laugh!

Coming up in September, Hendrik is back and we're doing an open Q & A session so get your questions in...

If you'd like to enter for free schwag or just have a comment, question or suggestion drop me a line at mattsbasementworkshop@gmail.com or  head over to my website at www.mattsbasementworkshop.com or call our Skype Voicemail at 231 354-2338.

If you have the time, please take the new listener survey.

To download directly to your computer Right Click on direct download, choose "Save Target as"

Ancient Kauri wood.

One new story and one very old story.

A lovely couple from Ohio contacted us a few months ago and asked if David would make them rings of Kauri wood. The couple specially ordered the wood from ancientwood.com and had the wood shipped directly to David.

The ring you see here is David's first kauri wood ring; his test ring.

Dusty and Erin's rings will be kauri wood with bird's eye maple liners.

Now for the old story. This Touch Wood Ring is crafted from ancient kauri timber that is aged from 30,ooo to more than 50,ooo years old. Ancient Kauri wood comes from forests buried at the time of the last Ice Age, which are located on the Northern Island of New Zealand. It is called the World's Oldest workable timber. Read The Kauri Story on the Ancientwood website. These points are from their pamphlet.

• The harvesting of Ancient Kauri is a very ecologically friendly practice.
• No standing trees are cut
• These incredible trees are excavated from underground and any disturbed land is carefully restored.
• Every tree grew for more than 1200 years.
• They stopped growing over 50,000 years ago.

This ancient Kauri wood is pretty spectacular stuff and it fills us with a sense of wonder to hold something so very very old.

Bespoke Wooden rings
meticulously hand crafted
in Canada
by David Finch.

Touch Wood Rings

I am delighted to note that Alan Peters' book
Cabinetmaking The Professional Approach is due to be republished in the autumn this ...

Wood Ring Custom Order

You can order your custom wooden wedding ring set at simplywoodrings.com. If you have a special wood that you have a deep connection with or just the love of nature and a desire to live in harmony with the earth, in an eco-frendly way. I will be glad to put something to gather for you. Visitme at http://www.simplywoodrings.com

It has been years since the radial arm saw came into my shop, and I have not used it at all because it was not set up accurately. I've been working on fixing this over the last two weeks, and I'm getting quite familiar with the settings.

The thing that took me longest, was getting the table to be nearly perfect in its alignment with the saw arm. I had spend hours trying to get this right, and I was getting nowhere until I learned the trick from a book called Fine Tuning Your Radial Arm Saw, by Jon Eakes. The secret was to adjust four reference points on the table and use a crescent wrench as a lever for fine positioning. This simple trick was a huge revelation, and once I learned it, adjusting the table was done in under an hour. I'm sure I could do it in under 30 minutes now if I needed to do it again.


I'm now most of the way through testing and adjusting the saw. I hope to finish tomorrow and start ripping stock for the storm windows I need to build. I guess I just needed a big project (ripping and chopping the stock for 5 storms) with a deadline (winter) to motivate me to get this machine working. There was no way I was going to rip all that stock by hand.

It's the middle of July and while technically...I'm still on vacation, it's time to give away some great schwag to some even greater listeners!!

This week we have a set of 2-1/2" Whiteside Brass Height Gages for one lucky winner and a great title from Sterling Publishing for another lucky listener.  That's right, two lucky winners this week!

Oh and by the way, checkout the video for today's show...I have a little surprise for everyone.  Warning though!! The sound is left channel only...a new bug popped up and I'm working on it.

If you're interested in getting a set of your own gauges from Woodcraft click here, Whiteside Brass Height Gauges.

WIN AN iPOD TOUCH!!  If you have the time, please take the new listener survey, and when you do you'll be entered to win an iPod Touch.

If you'd like to enter for free schwag or just have a comment, question or suggestion drop me a line at mattsbasementworkshop@gmail.com or  head over to my website at www.mattsbasementworkshop.com or call our Skype Voicemail at 231 354-2338.

Listen to today's show by clicking on the player below

powered by Podbean.com

To download directly to your computer Right Click on direct download, choose "Save Target as"

Baldwin's Book Barn, located in Chester County, PA, is 4 stories of ruggedly-built shelves that support over 300,000 used and rare books.

The main portion of the store is a former dairy barn built in 1822. Original flooring, rafters, and doors remain, providing the proper setting for the collection.

A grassy embankment behind the barn slopes upward to the second floor, enabling the 19th c. farmer to easily move things to the upper levels. This embankment is characteristic of a Pennsylvania Bank Barn.

Inside is a catacomb of tomes.

Stacks and shelves and row after row of hard to find and out of print literature are a book-lover's dream.

I found the handmade lock on the door that leads from the lobby to the barn particularly interesting. The bowed piece of oak on the left, which was originally longer and has since snapped off, acted as a spring mechanism to slap the bolt shut as the farmer closed the door, thus keeping ol' Bessie from getting loose.

It's nearly impossible to leave the store without finding some must-have book. I purchased three.

One is a book on Pennsylvania Dutch furniture ($27) and one is about handtools ($4). You may notice a few loose papers sticking out of the handtool book. Baldwin's includes whatever papers were tucked within the book by the previous owner. Mine contains articles about woodworking that were clipped from local papers in the 1970's.

So, what's the unassuming little brown book? That is a 1952 reprint of The Village Carpenter, by Walter Rose ($12).

You never know what little treasure you'll find at Baldwin's, but no doubt, you will find one.

A package from Mike Wenzloff arrived late in the day yesterday. I knew this one was coming, and it was all I could do to keep myself from tearing into it. But I waited - because there were two items for Riley as well, and I figured he would want to open it. Inside were two pairs of small saws - a rip and a crosscut. Riley's pair are quite small - but fit his small hands very well. At his request - his first project is going to be to learn to cut dovetails.



The other pair of saws were quite specifically designed. Some time ago, I asked Mike if he would be able to make a dovetail sized saw to be used specifically for cutting exotic woods. He was quite sure he could - so we moved on to the rest of the details. Ebony handles were decided on fairly early in the process, thanks to a good friend (thanks again Dan). Mike sent me several photos of different handle designs to choose from. We settled on a modified Patterson handle - and I have to say - I cannot imagine anything more comfortable. It feels as though I shaped it myself. The blade is 8" long and has 2" of usable depth.



Riley and I called Mike to let him know they arrived safe and sound and to thank him for doing such a wonderful job. He asked if I had tried them out yet and I explained that I hadn't - but the first use would be to cut the slot for an adjuster on an A2 jointer. The long silence was finally broken with “Oh geeze - now I am nervous!�



As I suspected - the rip saw worked perfectly and cut a beautiful clean kerf in the Brazilian Rosewood handle. So thanks again Mike for two wonderful pairs of purpose built saws.

Do most people have high opinions of bunnies?

Because I am starting my workday covered in bunny fur.

It all goes back to Ireland. During my vacation in Ireland in June, I bought at least four sweaters that my wife refers to as “old man sweaters.� There is a cardigan with a full zipper that is especially Fred Rogers’ish when I don it to fight off the nip. However, last week I tossed it into the tiny trunk of the Benz and managed to bust out two zipper teeth when the trunk latch came down on it. It is off at Suzy Tailor (that can’t be her real last name) having the zipper replaced this week.

During my transition from Michigan to Indianapolis I am living with my parents while diligently looking for a new home. (Do you have any idea how tough it is to find a house that provides at least 1000 square feet of woodshop area in addition to at least 3 stalls of garage space in a neighborhood that would be willing to accept ME?????) So during this time of living with my folks, most of my clothing is still in Michigan. All of my coats and jackets are in Michigan. I just brought two old man sweaters to Indianapolis. The cardigan is at the tailor for repair, so this morning I ran back into the house and pulled on my Bunny Hair (Angora) Commando Sweater. I pulled it on over my lovely oxford dress shirt. My cufflinks dug into the sleeves as I wrestled the sweater over the upper half of my body, but eventually I got it on. I drove to work with the outside temperature digitally indicated at 31 degrees. Even with the seat heaters in the VW I am glad I had the sweater on.

I arrived at work, walked to my office, and pulled the sweater off. My lovely dress shirt is COVERED in blue fuzz. It is angelically soft blue fuzz. It is the blue fuzz of the softest bunnies on the planet, but I am covered in blue fuzz.

Something else…since I am the owner of the most famous dog in Woodworking (the yellow lab Peyton), my world contains countless sticky lint rollers. And even though my entire career has seen one of these in my desk drawer, I have not yet brought one in for my new office. So I am sitting here... FUZZY... with no tape roller available.

I have to wonder about the style factor. When judging pieces of flair, can the bunny hair be considered an accessory since its navy color accents nicely with the various blues in the pattern of my shirt? Perhaps I am at the forefront of a new look. If Bunny Fuzz become THE look of the fall season, remember you saw it here first.

Make all the fun you want to about all his “routahs,” but you have to admit that Norm Abram has done more to foster a worldwide interest in woodworking than anyone else. While I don’t always agree with his choice of construction techniques and joinery, he has made woodworking approachable and less intimidating for millions of people.  I had the chance to meet him (actually, just a handshake) at a Delta/Porter-Cable gathering at the AWFS show in Las Vegas in July. He seems like a great guy and I’d like to have the chance to sit and have a cup of coffee with him sometime.

In Design News, there’s a great article about how Norm got started and how he managed to make it into his 20th season this year on New Yankee Workshop. Did you know that Norm attended college with the intent of getting an engineering degree?  Here’s an intersesting quote from the article:

“I hated sitting in a class of 600 in a thermodynamics class, but I loved being in the lab working with metals. I hung in there for a couple of years and said this isn’t for me. You can learn a lot from school and books, but you really learn from experience,� he says. Going with a gut feeling, he switched to production management in business school, sensing he wanted to be a building contractor. He came close but never earned a degree because midstream in college he “felt it was time to go to work.�  

And the rest is history, as they say.

Beautiful Mesquite Cabinets require the hand of a craftsman and Mesquite HardWood from ADM.



Photo Courtesy of Warsaw Woodworks

Fine Mesquite Cabinets installed By Craftsmen Like Joe Mozdziock of Warsaw Woodworks of Chino Valley Arizona really make an impression. This Kitchen Center Island was installed by Joe in the Prescott area. The Kitchen can become a place of warmth and beauty , and premium lumber from Arizona Desert Mesquite is the place to start. Here's a shot of some cabinets in the kitchen.

 

Contact :

Warsaw Woodworks
Joe Mozdziock
P.O Box # 2625
Chino Valley AZ  86323
(928) 636-0197

joemoz@netzero.net

Last Saturday, during a trip to Downes & Reader in Stoughton, MA, I picked up some Freijo at $3/board foot. I selected 5 pieces of 4/4 stock that were roughly quarter sawn. They are 5" wide and about 3 feet long. I know nothing of the wood, but it is beautiful to look at. Wikipedia says it is also called Spannish Elm, Ecuador Laurel, or Salmwood, and as they say: it looks very much like teak. I'm looking forward to working this wood.

In about a week, I'm off to western Massachusetts to retreive some rough sawn oak and planksawn pine. I'm told there is about 150 or 200 board feet, and I'll need a place to put it. I should build a lumber rack soon. Fortunately, my brother-in-law was throwing out some perfectly good 2x6 lumber that he didn't mind me bringing home; so I have the supplies. I just need to build the rack.

Hey everyone I've finally went and done it, I've built a chisel plane from some scraps laying around the shop and a brand new Hock Block Plane blade (the most expensive part of the build!)

Many of you sent me the plans to the FWW article featuring the chisel plane construction in issue #148.  Here's a link to it Wooden Chisel Plane.

If you'd like to enter for free schwag, have a comment, question or suggestion, drop me a line at mattsbasementworkshop@gmail.com or  head over to the website.  Or...leave a voicemail at 231 354-2338.

Interested in ordering DVDs containing the complete series of audio, video and PDF episodes from Years 1 & 2 of MBW?  Drop me a line at mattsbasementworkshop@gmail.com, $25 for each or $40 for both.  Also, each month I'll be selling CDs with all of the previous month's episodes for $8.

Listen to today's show by clicking on the player below

powered by Podbean.com

To download directly to your computer Right Click on direct download, choose "Save Target as"

Trend doesn't seem to sell this any more. It's the "RoutaSketch" and I picked one up on clearance at Rockler for $25.

It was when they had the coupons 50% off any clearance item. They had two of these RoutaSketches, original price $99, clearance price $50, with my coupon $25.

I figured for $25 it was worth checking out. I was intrigued by the concept, that's for sure.

Inboxed, it's clear the thing was made as cheaply as possible. All plastic except for a pair of brass thread inserts in the base and the steel bars to hold up the template and the tracing stylus.

I assembled according to the directions. The steel bars were a REALLY tight fit in the plastic bases. Tight enough I feared I'd break the plastic before even getting to try it. But they survived. The plastic may be tougher than I initially thought!

After assembling the stands I looked at the instructions to determine which holes in the base to use for my Porter Cable router. But, alas, there were no PCs listed in the table!

No Porter Cable support? How can this be?!?!?!

I suspect that maybe PC isn't as big in Europe as it is here in the US. Trend seems to be based in the UK. That might explain it.

I tried to line up the holes in my PC with the myriad holes in the base of the Routa Sketch. No luck. None at all. Bleh.

I decided to grab the Harbor Freight plunge router that's been pretty much setting on the shelf. Sure enough, the template holder screws were a match. In fact, Trend was nice enough to include long screws that fit! A good thing since the ones that came with the router were far too short to mount the RoutaSketch base with.

After some dry runs making sure I had the motions down and was comfortable controlling the router with this big thing attached (really it isn't that bad, things moved quite smoothly) I picked one of the designs that came with the RoutaSketch.

The RoutaSketch comes with a good assortment of line art to use. Oddly enough (or maybe not), at least a few of those are public domain line art. My wife saw one of them at the local library for the kiddies to color!

With the paper on the tracing platform, my plunge router dialed in to make a very light cut, and my daughter and I wearing goggles, I started cutting.

The reason I wanted to use the PC router is I hate plunge routers. I understand the need for them, which is why I own one, but I prefer a straightforward simple router without the plunge feature. During this trial, the biggest reason I hate plunge routers showed itself. If I concentrate on the work, I'll relax my arms, causing the router to "de-plunge". The router keeps making the right motions, but the bit is no longer cutting. Grr...

Another thing that was irritating me was the stylus would grab the paper causing the paper to move. Well this screws up the pattern being cut into the wood. It turns out that the package came with a sheet of acetate to lay over the paper so the stylus moves more smoothly.

Whoops!

Even so, I thought it came out pretty decent!

I just carved into the mini-bench top. Don't worry, I'm not damaging my work surface. I had enough damage to it already that I need to resurface it with my jack plane.

I didn't carve any of the details. This was more a test of the tool. It's not a project. The outline looks good, but you can see where the aper shifted. it shoved the sea horse's forehead into it's ears. The acetate should prevent that from happening next time.

Yes. There is going to be a next time...

Tommy reviews the work so far on the dresser, including the dividers and the drawers. He then shows how he worked the drawer facing.

In some parts of the world winter time has finished, while in other parts, autumn is starting… Wherever you live, is a good moment to show you this lovely puppet that is wearing cozy and warm clothes.

I improvised the pattern, so I´ll try to remember it for you.

1 - Cast on 14 loops. Make 7 rows of elastic stitch.

2 - Row 8: Knit 2, separate 4 loops in an extra needle, Knit 3, separate 4 loops in an extra needle, Knit 2. Increase 6 stitches (4 next to the loops you separate, 1 at the beggining, 1 at the end).
3 - Row 9: Purl (leaving the 8 loops you separate without purl, in their extra needles).

4 - Row 10: Knit

5 - Row 11: Purl

6 - Row 12: Knit

7 - Row 13: Purl

8 - Separated loops: they are going to be the arms. Make a knot with the yarn in the first loop of one arm (4 loops). Knit the row increasing 2 stitches (you get 6 stitches). Alternate Purl and Knit each row. I made 5 rows. Do the same with the other arm. After that sew the back part of the body and the arms.

9 - Head: Cust on 8 loops and alternate knit and purl along 9 rows. Increase until the 5th row until you have 18 loops, then decrease until you have 6 or 8. You´ll get a rounded shape. After finishing the head, sew it and fullfil it with cotton or a similar material. Then sew the head to the body.

10 - I Knitted the scarf, custing on just 3 loops and making Jersey. (Knit one row, Purl one row). I made the hat with sc (single crochet), crochetting circular. You can variate and put hair made of yarn).

11 - Make the hands: use crochet to make the little balls, there isn´t a technique, I made sc until I had a round little hand.

12 - I made tho little eyes with the sewing needle: look at those beautiful green eyes! But he is mouthless…

I think he is lovely! It was a moment of inspiration, I hope to have those moments more often!

FrAn

Oct 2 …Choosing the Best Workbench for Your Shop w/ Dennis Perkins

Oct 9 …Selecting Lumber: Get the Best Wood Possible for Your Projects w/ Dennis Perkins

Oct 16 …Straight, Flat, & Square: Three Tools that Make it Easy w/ Terry Zuck

Oct 23 …Mortise & Tenon Joinery: Simple Techniques for Strong Joints w/ Jim Downing

Oct 30 …Using Sheet Goods: Why “Strong, Stable, and Flat” is a Good Thing w/ Bob Zimmerman

Nov 6 …3 Solid Steps to Building a Workbench that Works w/ Phil Huber

Nov 13 …Spline & Groove Joinery: Tips for Keeping Large Pieces Aligned w/ Chris Fitch

Nov 20 …Shop Storage: Cabinet and Shelving Units w/ Carol Beronich

Dec 4 …Simple Techniques for Building Doors & Drawers w/ Dave Fremming

Dec 11 …Finishing Touches — Workbench Wrap Up w/ Vince Ancona

Get the full schedule of upcoming seminars and descriptions at WoodworkingSeminars.com

The seminars start on October 2nd and run through December 11th. Cost per seminar is $8, but the price includes a $5 $awbuck$ coupon good for any item in the Woodsmith Store (excluding seminar tickets and season tickets). Season Tickets are available for $70, a $10 savings over single tickets. Each season ticket purchase comes with ten $7 $awbuck$ coupons, which means the seminars are FREE!