You can now download an enhanced pdf of the March 2008 issue of Woodworking Magazine (Issue 9) for $6.

Our instant digital downloads are compatible with any computer running Adobe Reader 7.0, a free program available from Adobe that runs on Macintosh, PC and other systems. The downloads are delivered to you on a secure and fast server (a high-speed Internet connection is highly recommended). Plus, if for some technical reason your download is interrupted (power outage due to nefarious squirrel activity etc.), it’s quite simple to get back on and download the issue again.

Issue 9 focuses on the act of handsawing, and it explores the three backsaws you need for hand-cut joints – the dovetail saw, carcase saw and tenon saw. Plus we explain the nearly-lost English system of cutting joints by hand.

We also delve into cutting circles with a simple (and very cool) jig, plus how to properly use glaze when finishing. All these skills will help you build the Stickley Tabouret featured on the cover.

On an administrative note, we’re still working on how to deliver subscriptions digitally to subscribers and have narrowed it to a couple options. More news on that to come this summer. Until then, these enhanced pdfs will (we hope) keep you informed and inspired.

For more details on the digital downloading process and to place an order, click here. You can view all our digital downloadable products here.

— Christopher Schwarz

You can sharpen your woodworking skills with helpful tips and techniques from the editors of Woodsmith and ShopNotes magazines. Get a FREE tip sent to your email address each week! Go to WoodworkingTips.com and sign up today.

Here’s last week’s tip from Woodsmith online editor Ted Raife:

Finishing shelves can be a time-consuming chore. After applying finish to one side, you often have a long wait before the finish is dry and the shelf can be turned to work on the other side. When each side needs several coats of finish, the whole process can really drag on.

Impatience finally spurred me to figure out a way to streamline the job. If I could safely stand the shelves on edge, both sides could be finished at the same time. Support feet attached to the back edge of the shelf to keep it upright were the answer.

As you can see in the drawing, the feet are simply thin strips of wood that are screwed to the back edge of the shelf — one at each end. When the job is done, I simply remove the feet and no one is the wiser. Except maybe me, I’ve cut the finishing time in half.

Good Woodworking,

Ted Raife
Online Editor, Woodsmith

© August Home Publishing Company
2200 Grand Avenue, Des Moines, Iowa 50312

Click here to subscribe to Woodsmith magazine.

You can sharpen your woodworking skills with helpful tips and techniques from the editors of Woodsmith and ShopNotes magazines. Get a FREE tip sent to your email address each week! Go to WoodworkingTips.com and sign up today.

Here’s last week’s tip from ShopNotes online editor Phil Huber:

I never seem to have enough storage space in my shop. This is especially the case when it comes to screws, fasteners, and other odds and ends. Things I need close at hand, but don’t use every day.

So, to store these and other small items, I built a pull-out storage case, like you see in the photo at right. The case is large enough to hold a couple of small plastic storage cabinets with lots of drawers (the kind you find at hardware stores and home centers). I also added a few shelves to store other items.

Since I wanted to be able to move the case, I placed it on wheels (see drawing at right). A handle attached to the side lets me simply pull it out to get to the items and then push it back out of the way again.

The case fit nicely against the wall next to my workbench. It worked so well that I built a couple more cases and rolled them next to one another. Now I have lots of storage in a space that would have gone to waste.

Good woodworking,
Phil Huber
Online Editor, ShopNotes

© August Home Publishing Company
2200 Grand Avenue, Des Moines, Iowa 50312

Click here if you’d like to subscribe to ShopNotes magazine.