I have been using the new Jet curved blade jig on my large Tormek, to grind the subtle curve which I find so useful in ...

The next photos will be of the finished planes - I promise.

Hi Folks
The workshop has been going flat out preparing for the "Festival of the Tree" at Westonbirt. I'm packing the van and hitting the road in the morning, so today is the last day for me finish off bits and pieces and any last minute tasks.
Again, I've been fortunate to have my workshop helper (let's call him "Mr. X" for now....) giving me a hand. I can tell he's enjoying it because he was moaning he didn't have his own workshop apron - one Tormek apron later and he's a happy bunny! Of course, that doesn't stop him repeatedly dropping hot pieces of metal into a jam jar of water, but I promised I wouldn't mention that ;)
With the Ipod rocking away in the background we've produced some lovely planes in the last few weeks. A Rosewood smoother and Miter plane are two of my favourites, and we've been making a selection of the new "Philly Shaves" in walnut, oak, maple, Gonc and Rosewood. They look fantastic - arty photographs to follow!
So - I should get back in the workshop. Time is ticking away....
Cheers
Philly

Rosemary and Bob are in danger! A spider has arrived and somebody told me she is really big!

Here you have it…….

Well, she is not so big, and she doesn´t seems to be dangerous. Matilda is cute!

How to do Matilda?

Start: Ch 12

Row 1: Work SC, 1 SC in each ch.

Row 2: Work 2 SC in each SC (24sc)
Row 3: Work 1 SC in next SC, 1 SC in next SC, 2 SC in next SC (32 SC)

Row 4 , 5 and 6: 1 SC in each SC (32 SC)

Row 7: DECREASE - SC DEC (insert hook in next stitch - the same you do with SC -  insert hook in following stitch and pull hook through the three loops to decrease.) Make 2SC and 1 SC DEC (24 SC)

Row 8: Make 1 SC, 1 SC DEC, 2 SC, 1 SC DEC.

Last rows: Make SC DEC until thee isn´t a hole. (Only the hole downside)

Legs: Make 7 or 8 CH legs. I embroider some wire in the legs, that´s how Matilda is stood up on her legs in the pic. But for kids is better to take the wire out.

Face: Make the eyes and mouth with white and red yarn. (You can use other materials, like plstic eyes or sew felt pieces)

Fulfill the spider with the material you choose: this time I used black yarn (cotton was not a good material this time: you could see the white color through the little holes.)

That´s all!

We have just finished shooting the 'Precision Plane Tuning' DVD, after three days of hard work. This concentrates ...

Ladies and Gentlemen….Children of All Ages….Football is back. The real NFL season started last night, and that makes me happy. I am claiming the start of the NFL season as a birthday present to my big brother that he is letting me share. (Thanks, Edward...and have a Happy Birthday.)

Years ago I was like a lot of American men, wasting away the pre-work morning watching SportsCenter. It didn’t matter if ESPN’s only highlights were from a Kiwana’s Donkey Basketball Game in Muscle Shoals, sports was the glue that held together the X and Y chromosomes that made me a man.

However, with the passage of time I just started caring less and less. Millionaires on strike…. one brawl after another… corrupt officiating… the firing and retirement of my true heroes…. somehow I eventually gave up on all spectator sports except the Indianapolis Colts and Notre Dame Football. Believe it or not, I haven’t missed any of it.

My life went from one where Coach Bob Knight and the Indiana Hoosiers were a significant priority to one where I haven’t watched a college basketball game in several years. Even the dogs have enjoyed the mellower atmosphere associated with the reprioritization of my life. (Abby did not always like dressing up for games.)


Still, all of the energy that in the past was divided among the Cubs, Pacers, Hoosiers, and Maple Leafs was added to the love I have had for the Colts for the last 20+ years.

And last night officially started another season of the only professional sport I care about. Still, I am a very snobbish fan. I won’t watch the NFL just for the sake of watching football. I am a Colts fan. I watched part of last night’s game only because it featured Eli Manning, and most of us Colts fans have adopted Peyton’s little brother and his Giants as our NFC team of choice.

It has been a long wait since February, but “next year� is finally here. Part of me hates the off season. I hate having to wait for September to watch the team that means so much to me. Yet, sometimes it helps to have a pause or separation. Seven months away from the Colts is enough to make me eager for the start of the season. I cannot imagine what it would be like if I felt this way about the America’s Cup or Olympic Bobsledding. It would be hell to wait years for the return of my favorite sport.

On a personal note, I am glad school breaks are only for the summer. If my scholastic breaks had been 4 years instead of 3 months I don’t think I would have ever gone back for my sophomore year…let alone graduate. Perhaps that summarizes the difference between how we humans sometimes incorrectly view sports versus education. FIFA World Cup can get by with a tournament every four years, and the passion will always be fever pitched. However, it is a very rare student who could take 4+ years off and return to complete what they had started. Also, students typically get paid a lot less (with very few product endorsement deals), but that is a different rant.

Our very own guest expert Hendrik Varju has returned for another visit here at Matt's Basement Workshop, and this month we're mixing things up a little bit.  Rather than our usual question and answer show, we're talking a little more philosophical and asking the question "Why do we woodwork?"

Today's episode is part 1, and after you listen to it I'm willing to bet that many of you feel the same way about why it is we woodwork as we did. 

You're welcome to send in your own comments to the discussion or even pose a few more questions too.  Just contact us either by email at mattsbasementworkshop@gmail.com, leave a comment at the website, or call and leave a voicemail at 231 354-2338.

AND DON'T FORGET!! on June 14th, Hendrik is conducting a seminar based on his book "Starting and Running a Woodworking Business"at his Acton, Ontario Workshop.  If you'd like to attend or just get more information about these seminars contact Hendrik at info@passionforwood.com.

If you have the time, please take the new listener survey.

Listen to today's show by clicking on the player below

powered by Podbean.com

To download directly to your computer Right Click on direct download, choose "Save Target as"

When it comes to finding a tool(s) that can speed up your set up of router bits or blades I've been very skeptical. 

But I've been won over by the brass height gauges from Whiteside.  These little pieces of brass allow me to accurately set up bits so quickly I'm still convinced I'm doing something wrong, but the fact is these accurate results are repeatable over and over...

If you're interested in learning more about these gauges click here Whiteside Brass Height Gauges.

If you'd like to enter for free schwag or just have a comment, question or suggestion drop me a line at mattsbasementworkshop@gmail.com or  head over to my website at www.mattsbasementworkshop.com or call our Skype Voicemail at 231 354-2338.

If you have the time, please take the new listener survey.

Listen to today's show by clicking on the player below

powered by Podbean.com

To download directly to your computer Right Click on direct download, choose "Save Target as"

��六角形�スツール�も���り研究会�２年生・横井敦���デザイン�制作��JR�阜駅内�カル�ャースクール����も���。森林文化アカデミー�������実社会�ら��頼を���クラフトや家具をデザイン��り�制作�る実習��り��。「プロジェクト��呼ん����。
カル�ャースクール「TAKUMIアカデミー��ら�スツールを新調�����相談を�������去年�暮れ。学生�呼�������横井���乗り出��プロジェクト���実施�る����り���。写真�２種類�試作�を�����TAKUMIアカデミー�スタッフ�打����を���る�����。
Atsushi Yokoi, a student at the Craft and Furniture Department designed and made those stools for an adult education centre in Gifu. We often take such 'real' commissions from public and private clients. We call it 'projects'.
The Takumi Academy , the adult education centre, contacted us last winter to discuss about their renewal of stools. Atsushi applied to the project and submitted a couple of new stool designs. The photo shows his presentation to Takumi Academy staffs with two prototypes of the stool.

デザイン�コンセプト���阜�山�採れ��径�間��を生����。
幅�狭�部�を組������る��������。�も５種類を使�����。
The concept of the stool is to make the most of small diameter logs in local forest.
The hexagonal seat is made of small pieces of five different species.

制作��飛騨�家具会社��り教育機関�も�る「森林���塾��行����。横井��自ら���塾�行��スタッフ�指導を����ら制作����。
森林文化アカデミー�������民間�工房や会社��体験就業を実習���行�����。「インターンシップ��呼ん����。
Atsushi then went to the Shinrin-Takumijuku, a furniture workshop cum educational institution in Hida. We encourage students to go out of the college and have work experience as an intern.


１ヶ月���制作�������２５脚。����TAKUMIアカデミー�教室�使�れ�大好評���。��������椅��比��無垢�座��や�ら���座り心地������。
���産学��プロジェクト。�れ�らも��も�を生�出��行�������。
Atsushi spent a month in Hida and finished 25 stools. They were delivered to the Takumi Academy early this month. They were very well received among the staffs and students there. The solid wood seat is soft and comfortable compared to the former plywood stools.
We want to produce good crafts and furniture through such industry-university cooperation projects.

Hi Folks
Brace yourselves - I have actually done some woodworking! Yes, non-planemaking stuff.
Remember the acoustic guitar project I've been slowly building? It's a Weissenborn lap steel guitar, and I made pretty good progress until I came to making the sides. Yes, the tricky part......;)
A couple of weekends ago I made a small bending iron from some steel pipe and a blow torch. Worked fairly well but the pipe was too small a diameter to give me the gentle curves I required. Rather than purchase some suitable pipe I decided to go for Plan B - build a former and laminate the guitar sides in the vacuum bag.
So I built a one piece former from some poplar and laminated the sides from 6 pieces of veneer. It was simple work and the vacuum press did its usual amazing job of flattening things while the glue set. I made a pair and then set them aside to cure. Now I can get on with assembling the guitar, when it finally looks like a "real one"!
Cheers
Philly

My two younger daughters are completely fascinated with fairies right now. All they seem to be talking about lately is fairies. My seven year old told me earlier today all about how she and her neighborhood friends built a little fairy house in the back yard under a bush.

Apparently the fairy didn’t want to sleep outside with the bugs and decided to set up a little condo in our hallway.

It’s no secret around the office and among my family members that I have an affinity for old tools.  It could be old hand tools or “old iron” power tools.  I have a couple of antique scroll saws and a very old three-wheel Craftsman band saw in my shop.  I guess I inherited this habit from my dad.  He’s always bringing home a “bargain” from the latest garage sale or auction.

Last week, he called me and told me he just “acquired” an old Craftsman planer (model 103.1801 made by King-Seeley).  He wanted me to research it and find out what I could about it.  Naturally, the first place I look for old manuals and history of old tools is www.owwm.com.  They’ve become the online library for photos, tool manuals, and company history for old tools.  You can submit photos of your old tools and scanned manuals and parts lists for the rest of the world to share.

As I was trying to research the history of dad’s planer and find a manual for it, I discovered that the OWWM web site was down “due to technical difficulty.”  I was heartbroken and afraid that something terrible had happened.  I thought perhaps all the data that had been accumulated over the years would be lost.  So I emailed the webmaster to get the scoop.  Here was his reply as of 10:00pm CST on Thursday, the 13th of March 2008:

We had some issue with our former host and changes that they made to their server that “broke” the code that runs our site. To resolve this problem, we decided that the best course of action was to invest in a new server, which we will own and control. This has turned into a longer process than we first anticipated. We first had to raise around $2,500 for the hardware and software to run our site. We fortunately were able to get the majority of this donated through our many members. Next, we had to order a server, which took several weeks to get built and delivered. The new server arrived at our new host late last Friday and they have been working hard this week getting it set up to run. We are very close to launching the new site - maybe by the end of this week but in reality, probably the first of next week. No data was lost, it is just taking us longer than we like to get everything up and running on the new server.

Keith Rucker
Tifton, GA 

Hopefully, they’ll be back up and running soon. 

Do you want to know how OWWM got started?  Well, you’ll have to wait until the web site is back up and running, but when it is, visit this page for a complete history of what got Keith started down this road.  It’s an interesting read.

Oh…by the way, Keith puts a lot of time and effort (and dollars) into this web site.  If you use and enjoy the content of www.owwm.com, why don’t you donate a few bucks to help him out? You’ll find donation links on the web site.

The measurements of the boards which comprise the four drawer case panels are a tad smaller than originally planned, so I have had to forgo squaring the ends of the boards of each of eight boards. Instead I have assembled the eight boards into four panels and will instead square then ends of these panels off. It is just an arbitrary decision at this point and doesn't affect the assembly of the panels, although nicer panels would have resulted had I squared the ends of the boards first. This also allows me to dial in as much length as absolutely possible in each of the panels.

I had also jointed the mating edges of each of the boards, the edge which mates with the other, matching board of the panel. This went well and I let the boards sit for a day or so afterwards to determine if any further cupping would result. A very small bit of cupping did result, and of course it becomes more pronounced due to the width of the panels. The next step involved scribbling witness lines across each of the cupped faces of the boards and handplaning the outside edge area working towards the middle. I regularly go back and forth with a flat, steel rule to determine how much progress is being made. I also try not to overshoot... which essentially decreases the overall thickness of each of the boards.

At this point, I have four panels ready to be squared to finish dimensions, both in width and length. A small part of each of the panels form the sides of the drawer case. I will also need to cross cut these sections off, which leaves me with four shorter panels which form the tops and bottoms of the drawer case.

I'm going to take some time and spend it outdoors today. We had wintry weather until late last week, but this week has been getting wamer and sunnier with temps in the low 70's today. We've had such a long winter up here, and this weather couldn't arrive soon enough.

The Mercer Museum, in Doylestown, PA, houses an enormous collection of tools and other artifacts that were used prior to the Industrial Revolution.

Among the exhibits are tools used by physicians, blacksmiths, clock makers, tinsmiths, cooks, cobblers, farmers, and woodworkers, in addition to many others; and collections of pottery, stove plates, painted chests, stagecoaches, boats, and much more.

Henry Mercer, historian, archaeologist, and owner of the Moravian Pottery and Tileworks, recognized the need to preserve the pieces that were being discarded in place of modern, manufactured items following the Industrial Revolution. He amassed nearly 30,000 goods and built a 6-story concrete castle in which to display them.*

The castle itself is remarkable, filled with little alcoves, winding stairs, and a central atrium within which the largest of Mercer's pieces hang suspended in mid-air. The building is literally stuffed full of artifacts. Each floor surrounds the central and open atrium which provides a view to the floors above and below.

Both the inside and outside of the castle are constructed with concrete. Even the muntins and mullions in the windows that afford views of each room's exhibit are made with it. Inside there are few sharp corners, mainly softened edges, even on the stairs; and arched entryways, rather than stiff and rectangular openings, separate spaces. I had never thought that concrete could seem so organic.

Within the Mercer Museum is the Spruance Library, a research library open to the public, which preserves written material focused on Bucks County history, the history of trades and crafts, and the life of Henry Mercer. I have yet to visit the library, which no doubt, is worth a trip back to Doylestown.

*After Mercer's death, the museum continued to collect tools and artifacts. Today, there are over 50,000 pieces in the collection, some of which may be post-Industrial Revolution.

Some of you may be surprised or even a little disappointed to hear that, but it's true.

No matter how hard I try to keep even pressure on my plane, the edge I'm jointing becomes sloped to the left. Knowing this about myself, I take a conservative approach to jointing by frequently checking my progress with a square.

You might think the way to remedy the problem is to lean to the right. But that would only result in a peaked ridge down the middle of the board with slopes to the left and to the right.

Instead, seat your plane firmly on the right side of the edge of the board (photo 3), being sure to keep the plane perfectly flat. Don't get too radical—only take a pass or two. As you continue to plane, gradually migrate towards center until you produce a shaving that equals the entire width of the edge.





I'll continue to practice and someday I'll be able to take moderately level shavings right from the start.

That's because keeping centered is my primary focus.

I’ve nominated our website in The 2nd Annual Open Web Awards – Niche and Miscellaneous Social Networks category. The more nominations we get, the better our chance to make it into the voting rounds.

If you’re a fan of LJ.com you can submit your nomination now:

They use e-mail for a vote confirmation and for alerts about the Open Web Awards.

Thanks!

This pickup tool was purchased at the 99c store several years ago. Over time, the end and pocket clip have fallen off and been lost. The telescoping tube and magnet on the end are just fine however, so I never tossed it.

Last night I decided to see if I could turn a nice handle for it.

I mic'd the fat end of the telescoping tube and got 7.98mm inner diameter. I then loaded up a kingwood pen blank and turned a handle with an 8mm tip, 1/4" long. Finished with shellac and friction polish, the kingwood handle was inserted into the pickup tool with a few drops of CA glue.

The handle is in VERY snug and the glue will keep it from coming loose.

I may have to buy a few more of these things from the 99c store and see what else I can do with them!

welding

A while back, in a previous post, I talked about the news that Shopsmith was in financial trouble. The news today confirms it. Robert Folkerth, the president was quoted as saying,

“…the company ’significantly reduced’ its reliance on sales representatives who often travel to shows to sell Shopsmith’s tools and accessories.” 

Wait a minute. Did he say they cut their sales force? What that tells me is that they don’t see much hope for the Shopmith product that we’ve known and loved since the mid-70’s.  Has the competition for lower-priced standalone woodworking machinery pushed the Shopsmith out of the market? Sadly, I think it’s just a matter of time before Shopsmith goes the way of other woodworking machine manufacturers. Soon, the only place you’ll be able to read about them will be on the Old Woodworking Machines web site.

A friend of the family approached me about building a custom bookcase for his daughter.  Who am I to say no to the opportunity to build anything?  So as promised I documented the build, the good, the bad and the ugly.  This is Part 1 of a multi-part series, and I'll be posting new episodes on Wednesdays from this point out, enjoy!!

REMEMBER!  If you have any comments, questions, suggestions or you want to enter for some free schwag drop me a line at mattsbasementworkshop@gmail.com or you can always leave a voicemail at 231 354-2338.

Hendrik is back this month and we're talking about "Why we woodwork".  We'd love your feedback on why it is that you woodwork also, so call or write in to the show.

Don't forget too that Hendrik is wrapping up his annual finishing seminar:  Part 3"Antique Restoration Techniques" - June 7th.  Also, coming up on June 14th, Hendrik is conducting a seminar based on his book "Starting and Running a Woodworking Business"at his Acton, Ontario Workshop.  If you'd like to attend or just get more information about these seminars contact Hendrik at info@passionforwood.com.

If you have the time, please take the new listener survey.

To download directly to your computer Right Click and "Save Target as"

A common question and concern for anyone using vintage planes is the topic of replacement blades.  While some vintage planes come with blades that work perfectly fine, often we may find ourselves with one that sorely needs to be replaced.

Modern manufacturers like both Veritas and Lie-Nielsen sell replacement blades, but the most common name most are familiar with is Hock Blades.  Hock blades are available through a number of resources including Woodcraft.com.  But if you're looking for a vintage replacement blade or just replacement parts for your vintage planes checkout Bob Kaune's Website.

REMEMBER!  If you have any comments, questions, suggestions or you want to enter for some free schwag drop me a line at mattsbasementworkshop@gmail.com or you can always leave a voicemail at 231 354-2338.

Hendrik is back this month and we're talking about "Why we woodwork".  We'd love your feedback on why it is that you woodwork also, so call or write in to the show.

Don't forget too that on June 14th, Hendrik is conducting a seminar based on his book "Starting and Running a Woodworking Business"at his Acton, Ontario Workshop.  If you'd like to attend or just get more information about these seminars contact Hendrik at info@passionforwood.com.

If you have the time, please take the new listener survey.

Listen to today's show by clicking on the player below

powered by Podbean.com

To download directly to your computer Right Click and "Save Target as"

Feedback and questions are what help to make this show move and we got some in today's episode.  A couple of listeners had some great feedback in regards to the hammer episode so I thought I'd share it with you.

Don't forget!! Hendrik is back in September so get your questions in for our open Q&A session.  

If you'd like to enter for free schwag or just have a comment, question or suggestion drop me a line at mattsbasementworkshop@gmail.com or  head over to my website at 231 354-2338.

Listen to today's show by clicking on the player below

powered by Podbean.com

To download directly to your computer Right Click on direct download, choose "Save Target as"

I saw this and had to mention it here, if for no other reason than to have a record for myself of it so I can refer to the links... On the WoodCentral handtools forum Joel Moskowitz (of Tools for Working Wood) posted a link to a book archived on Google Books titled “The London Chair-Makers and Carvers' Book of Prices for Workmanship� which was originally published in 1829. Later, he also put up a link to another book archived on Google Books titled “The Cabinet Makers London Book of Prices and Designs of Cabinet Work� published in 1803. These books are fascinating reads if you are at all interested in period woodworking of any kind – and the thread on WoodCentral is a great read as well..

read more

At least a half dozen times, I’ve experienced serious kickback while using my table saw. Not once during any of those times though did I feel that I was doing something that was inherently dangerous. I almost always use my guards and push blocks. I take my time to set up my saw for safe, accurate cuts. I’ve even been known to step back and question whether there is a better way to complete an operation that I’m not 100% comfortable with.

And still, I’ve experienced situations that could have resulted in bodily injury.

Once I was knocked on my keester when a workpiece I was ripping pinched the blade and got kicked back into my stomach. (I broke two cardinal woodworking safety rules during that particular procedure.) I don’t remember now what caused the kickback. But I’ll never forget how lucky I was not to have been injured more seriously. (Or the pain to my gut!) But none of us are perfect. Accidents happen and all you can do is hope they don’t happen to you. Right?

That’s why I was surprised while watching a recent segment of TOH, as a trim carpenter made a free-hand cut on the table saw. Frankly, I watched in disbelief as he made the cut and thought to myself, “Man, that just looks dangerous!” Norm Abram was standing there watching and I thought maybe he would say something, but he didn’t. I figured there would be a lot of people commenting about the segment on our woodworking forums. And there is a debate raging over at WoodNet. But, you may be surprised to learn that there are a lot of people defending the practice.

Several people have commented that the practice of pushing a piece freehand past a spinning table saw blade is an acceptable practice by professional trim carpenters. It may be. And the guy managed to make the cut during the show without any problem. But I can tell you one thing….I’m never going to try it.

What’s your response?

So since we're already in the neighborhood talking about Shop Vacs I had a few more thoughts I decided I would share with you.

This time my thoughts on Shop Vacs are a lot more positive than in the last episode and I have a few ideas about what to look for in a good Shop Vac.  Some are pretty obvious and others might seem frivalous but I think they're important to me.

While I don't think Shop Vacs are good for a central dust collection system I do think they have an important role in the workshop.

For anyone interested, coming up on April 11 & 12, 2008 there's a great little tool demo and woodworking school openhouse going on at J. Miller Handcrafted Furniture in Chicago. The details can be found at Lie-Nielsen.  There will be some great demos by a number of well known woodworkers and I'm planning on checking it out myself.

For comments, questions and schwag entries drop me a line at mattsbasementworkshop@gmail.com.

 

Listen to today's show by clicking on the player below

powered by Podbean.com

It's the beginning of a new month and that means it's time for Router Bit of the Month!!  For the entire month of April, 2008 Woodcraft is featuring Whiteside's 1/4" radius Cove and Bead Edge Profiling bit. 

This little decorative edge profiling bit is like getting two bits in one.  The combination of a 1/4" radius cove profile and a 1/4" radius bead give plain old square and chunky edges a beautiful decorative look that's very pleasing to the eye.

The great thing about Whiteside's cove and bead bit is that when you use it in your router table it's like getting four profiles for the price of one.  By running your stock flat against the router table you get an edge with the bead leading the profile, but by standing the stock on edge and running it up against the router table fence you get an decorative edge with the cove leading the profile.

Or, if you're just looking to use the cove or the bead profiles by themselves it's once again a matter of adjusting the height of the bit and moving the fence back and forth.  In a matter of minutes you're making separate profiles from this one combo bit.

If you're interested in ordering this month's Router Bit of the Month from Woodcraft.com just click on the picture:

Congrats to Frank Bylo, this month's winner of a Whiteside router bit!!  If you haven't entered your name for free schwag or just have a comment, question or feedback, drop me a line at mattsbasementworkshop@gmail.com.

If you're in the upstate New York area this weekend April 5 & 6 checkout the Northeastern Woodworker's Association's Showcase.  Filled with great seminars and demonstrations, check it out at www.nwawoodworkingshow.org.

For anyone interested, coming up on April 11 & 12, 2008 there's a great little tool demo and woodworking school openhouse going on at J. Miller Handcrafted Furniture in Chicago. The details can be found at Lie-Nielsen.  There will be some great demos by a number of well known woodworkers and I'm planning on checking it out myself.

Don't forget to get your questions in for Hendrik's next visit in April, we're talking lumber defects and how to work around them. 

Listen to today's show by clicking on the player below

powered by Podbean.com

Do most people have high opinions of bunnies?

Because I am starting my workday covered in bunny fur.

It all goes back to Ireland. During my vacation in Ireland in June, I bought at least four sweaters that my wife refers to as “old man sweaters.� There is a cardigan with a full zipper that is especially Fred Rogers’ish when I don it to fight off the nip. However, last week I tossed it into the tiny trunk of the Benz and managed to bust out two zipper teeth when the trunk latch came down on it. It is off at Suzy Tailor (that can’t be her real last name) having the zipper replaced this week.

During my transition from Michigan to Indianapolis I am living with my parents while diligently looking for a new home. (Do you have any idea how tough it is to find a house that provides at least 1000 square feet of woodshop area in addition to at least 3 stalls of garage space in a neighborhood that would be willing to accept ME?????) So during this time of living with my folks, most of my clothing is still in Michigan. All of my coats and jackets are in Michigan. I just brought two old man sweaters to Indianapolis. The cardigan is at the tailor for repair, so this morning I ran back into the house and pulled on my Bunny Hair (Angora) Commando Sweater. I pulled it on over my lovely oxford dress shirt. My cufflinks dug into the sleeves as I wrestled the sweater over the upper half of my body, but eventually I got it on. I drove to work with the outside temperature digitally indicated at 31 degrees. Even with the seat heaters in the VW I am glad I had the sweater on.

I arrived at work, walked to my office, and pulled the sweater off. My lovely dress shirt is COVERED in blue fuzz. It is angelically soft blue fuzz. It is the blue fuzz of the softest bunnies on the planet, but I am covered in blue fuzz.

Something else…since I am the owner of the most famous dog in Woodworking (the yellow lab Peyton), my world contains countless sticky lint rollers. And even though my entire career has seen one of these in my desk drawer, I have not yet brought one in for my new office. So I am sitting here... FUZZY... with no tape roller available.

I have to wonder about the style factor. When judging pieces of flair, can the bunny hair be considered an accessory since its navy color accents nicely with the various blues in the pattern of my shirt? Perhaps I am at the forefront of a new look. If Bunny Fuzz become THE look of the fall season, remember you saw it here first.

Dave Jeske at Bluespruce Toolworks is now offering a fishtail detail chisel. Very cool!