You can sharpen your woodworking skills with helpful tips and techniques from the editors of Woodsmith and ShopNotes magazines. Get a FREE tips sent to your email address each week! Got to Woodworking Tips.com and sign up today.

Here’s last week’s tip from Woodsmith online editor Ted Raife:

When gluing up a mitered assembly, I often rely on band clamps to pull the joints together. They’re easy to apply and provide the even clamping pressure needed to keep things square.

The only catch is that the sharp mitered corners of the assembly have to be protected from the pressure exerted by the band. My clamps came with metal corners meant for this purpose, but they often damage the corners they’re supposed to protect.

My simple solution was to substitute more forgiving, corrugated cardboard pads for the hard metal corners, as shown at right. The cardboard pads provide plenty of protection without leaving any unwanted evidence of their use.

You’ll find more great project tips, techniques, and plans at PlansNOW.

Good Woodworking,

Ted Raife
Online Editor, Woodsmith

Send for a preview issue of Woodsmith magazine

Hey Dick, Debbie challenged me too.. while we were chatting yesterday; she mentioned something about CEO dancing clowns.. or maybe she was referring to me ha.

Anyways here we come…

... and now one beautifuuul ballet jump

... and a sweet bonus from my brand new wife lol

These photos are from a great friends wedding (last weekend). I officially contribute them to our 10,000 projects happy dance ;) Who’s next?

Hi! I want to introduce to you a new member in my finger puppets family. She came to bring me a lot of chocolat on this Easter holidays: please say hello to Rosemary, my Easter bunny!

But she is not alone, someone has to look after this cute little bunny. Bob, the elephant is Rosemary´s company.

How to do them?

I used rest of used yarns.

- Crochet a little square (the size will depend on the yarn you use and on the finger size). You can use single crochet or double crochet. In my case I made Rosemary with single crochet and Bob with double crochet (body) and single crochet (head).

- When you think that the body is long enough, you increase a little to make the head´s shape (I increased 3 or 4 stitches along 3 rows, but this depends on the yarn you´re using).

- After that, you decrease, but this time don´t be afraid to over do it: crochet two and skip the next one along 2 rows. The important thing is that you don´t have more than 10 stitches.

- Then, sew the piece, leaving a hole in the down side (that´s way you can put your finger in). Put some cotton to make the head rounder.

- To fiinish your puppet add the details according to the animal you are doing and make the eyes with a contrasting color. This is not a big deal and there isn´t a strict technique: just put the hook in the correct place of the head to make the ears, trunk, mouth…

The finger puppets are a cute and easy gift. You can send me links or pics of your fnished puppets to share with us!

Every once in a while I'm asked if I could restore or make a saw for a fellow woodworker. Unfortunately, my current employment situation allows me little time for personal endeavors (like finishing my shop!), much less that for others - so I've had to severely cut back work I do for others.

Gladly, I'm certainly not the only game in town, and my response is invariably to recommend one of the others I know that are in the business. It seems that just a few years ago when I first posted the article about making your own saws, there were only three premium sawmakers with product on the market(perhaps more, it depends on your definition of "premium"). Now - it seems - there are many, many more to choose from. When asked, I usually steer someone towards what I believe would fit them best, and wanted to compile that list in a single location - here, obviously. If I don't mention everyone that's out there, please forgive me - these are only the ones I've had some direct experience with.

read more

Our very own guest expert Hendrik Varju has returned for another visit here at Matt's Basement Workshop, and this month we're mixing things up a little bit.  Rather than our usual question and answer show, we're talking a little more philosophical and asking the question "Why do we woodwork?"

Today's episode is part 1, and after you listen to it I'm willing to bet that many of you feel the same way about why it is we woodwork as we did. 

You're welcome to send in your own comments to the discussion or even pose a few more questions too.  Just contact us either by email at mattsbasementworkshop@gmail.com, leave a comment at the website, or call and leave a voicemail at 231 354-2338.

AND DON'T FORGET!! on June 14th, Hendrik is conducting a seminar based on his book "Starting and Running a Woodworking Business"at his Acton, Ontario Workshop.  If you'd like to attend or just get more information about these seminars contact Hendrik at info@passionforwood.com.

If you have the time, please take the new listener survey.

Listen to today's show by clicking on the player below

powered by Podbean.com

To download directly to your computer Right Click on direct download, choose "Save Target as"

You can sharpen your woodworking skills with helpful tips and techniques from the editors of Woodsmith and ShopNotes magazines. Get a FREE tip sent to your email address each week! Go to WoodworkingTips.com and sign up today.

Here’s last week’s tip from ShopNotes online editor Phil Huber:

My workshop shares space with the family car. So it’s important that all of my power tools be portable and take up as little space as possible. So I made the fold-up router table you see here.

I made a simple router table top and attached it to a pair of 2×4’s with screws. Then, after removing the top of an adjustable clamping table, I mounted the router table to the clamping table stand, as shown in the left photo above. The table is firmly supported by the clamping table base.

The nice thing about the table is it can be raised and lowered to match the task at hand. Best of all, I can remove the router and quickly fold the table up to store it against the wall whenever it’s not in use (right photo).

If you’d like to see other router table plans, just go to PlansNOW.

Good Woodworking,

Phil Huber
Online Editor, ShopNotes

Send for a preview issue of ShopNotes magazine

In a previous post, I talked about the new professional jig saw by Makita. Well, they’ve got two more they’re introducing to the market.

Both jig saws feature anti-vibration technology for over 40% reduced vibration and noise than competitive models. The Makita 4350FCT (shown at left) and 4351FCT (shown on the right) combine power and superior feel, with less vibration and noise. Both jig saws include three orbital settings plus a straight-cut setting, and are powered by a 6.3 AMP motor for cutting in all varieties of materials. The electronic variable speed control maintains consistent speed throughout the cut for superior results.

Makita also engineered comfort and control features into the new jig saws. An L.E.D. light illuminates the line of cut, while a built-in dust blower clears the line of cut for greater visibility. The ergonomically designed rubberized grip on both the top handle and barrel grip models provides greater comfort and control. The 4351FCT model features a rubberized barrel grip design to provide a closer grip to the work surface during cutting.

The patented tool-less blade change system provides fast and easy installation and removal of tang-shank blades. The die-cast aluminum base adjusts up to 45 degrees right or left with a positive stop at 90 degrees for solid cutting performance. An on-board hex wrench is included for fast, accurate bevel adjustments. Both models are ideal for professional woodworkers, cabinetry makers, and specialized residential construction workers. They include a blade set, anti-splintering device, cover plate, and tool case. 

Hey everyone, today we have the featureless friday!  More or less, I've been bitten by a bug and I've down for the count since tuesday.

But that's no excuse for not having a show and not giving away free schwag to the greatest listeners in the world!!!

So I have a few things to share with you and a little fever ridden rambling too!!

Don't forget!! Hendrik is back in September so get your questions in for our open Q&A session.  If you're planning on being at the IWF in Atlanta, anyone wanting to have a chat with Hendrik can leave a message for him in the Press Lounge.  Or, better yet, he'll be attending The Wood Whisperer's after-show get together Friday evening, August 22nd.

If you'd like to enter for free schwag or just have a comment, question or suggestion drop me a line at mattsbasementworkshop@gmail.com or  head over to my website at 231 354-2338.

Listen to today's show by clicking on the player below

powered by Podbean.com

To download directly to your computer Right Click on direct download, choose "Save Target as"

If I had the time, I’d build every project with hand-cut mortise and tenon or dovetail joinery. But that’s not a very realistic goal, nor is it necessary. There are plenty of joinery methods out there that can be made both quickly and easily. During the seminar podcast, I’ll talk about three of my favorite “quick and easy” joinery methods.

One of the most “traditional� methods is the lap joint. It’s easy to cut with just one setup on the table saw. And it provides plenty of face grain gluing surface as well as a good amount of mechanical strength.

For a couple of “modern� joinery techniques that are especially quick and easy, you’ll have to purchase specialized machinery to produce them. I’m talking about biscuit joints and pocket hole joinery. Both of these methods get their mechanical strength from distinctive fastener’s — biscuits or pocket screws. But the best part is that each can be setup and cut in seconds.

Be sure to check out the Woodsmith Podcast Store for links to a few products that I used during this seminar.

If you’ve read Woodsmith and ShopNotes magazines for any length of time, you know that we’re a fan of threaded inserts. They make it easy to build jigs and fixtures and knock-down furniture or projects. They’re a great way to add machine threads for attaching screws and bolts.

E-Z Lok is a manufacturer of threaded inserts for a variety of industries and applications. And I’ve recently discovered that their web site is a valuable resource of information you can use when building projects that make use of threaded inserts. Their web site contains PDF documents that contain detailed dimemensioned drawings and complete charts listing dimensions and recommended hole sizes for their inserts. (They caution you to try out the insert on a scrap piece to get the exact hole size.)

Click here for a chart of their inserts for hardwood.

Click here for a listing of the knife-thread inserts for softwood.

I like to use press-in “Finserts” whenever I can (see photo at left). I don’t have to thread them and risk not getting them in straight. You can simply press or tap them in place. Click here for more information on finserts.

If you scroll to the bottom of these pages, you’ll see links for PDF documents of drawings and charts.

E-Z Lok’s products are sold through a variety of distributors like McMaster-Carr, Reid Tool, and MSC.

This week, Dennis Perkins, assistant editor for Woodsmith and ShopNotes, is going to give us some pointers on using hand planes and scrapers for a smooth finish. He’ll also spend some time showing us how he likes to sharpen his scrapers during this week’s Woodsmith Woodworking Seminar Podcast.

As usual, all of the links to articles, seminar guides, and products that you’ll see being used during the seminar podcast can be found at the Woodsmith Podcast Store.